Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Designed to fit any fork, RapidRacerProducts has developed the EnduroGuard to work effectively with short-travel XC and 4X forks (80mm to 120mm travel). The 'T' shape clamping points on the arms are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer increased protection for higher speeds without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The holes for the fork brace aren't ideally located when using it as a rear mudguard, so these guards have two snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays, this feature creates more mud / tyre clearance and a much better fit.
The Proviz REFLECT360 CRS waterproof helmet cover is adjustable and designed to fit over all standard size cycling helmets. It made from the same 100% reflective material as our highly popular REFLECT360 CRS cycling jacket, it is fully waterproof, seam-sealed and lightweight. It is elasticated round the edges which can be adjusted to ensure a secure fitting around your particular helmet model and the reflective materials helps to ensure your position on the road is more easily seen at night. It is perfect for commuting in wet winter weather. About the fabric: The fabric used for the REFLECT360 CRS helmet cover range is unique to Proviz. The material may look unassumingly normal by day but at night, when the fabric picks up an external light source, eg vehicle headlights, it gives ?astonishing reflectivity' (quote: Cycling Active Magazine). The material is CE EN 20471 certified.
When you ride in the Cold Weather, covering your ears is the key to staying warm. This Winter Cap is designed to cover around the base of the neck and cover both ears without impairing your hearing. Constructed from 85% Nylon and 15% Elasthane, the inner layer is a breathable liner combined with a Windproof outer shell. No matter if you are Skiing, Fishing, Cycling or Running, the ETC Snug Winter Cap significantly prevents wind penetration and retains valuable body heat. Key Features: One Size Fits All,Water Resistant Membrane,Deep Tail to cover the ears and the base of the neck,Double layered for Windproofing, Water resistance and Insulation.
RapidRacerProducts EnduroGuard Front MudguardA unique mudguard, the EnduroGuard Mudguard can be used either on the front of your mountain bike or on the rear. It prevents mud, water and whatever else the trail throws up from the back of the tyre from reaching your face or back. Plus, in addition to keeping you clean, it protects your frame's rear linkages too. Clip on Mountain Bike MudguardAvailable in two sizes, the "standard" model suits shorter travel cross country and 4X forks with 80-120mm travel. The longer "large" model is best for trail, enduro and downhill bikes with 130-200mm travel.Features:Works as a front or rear mudguard Front guard protects you, rear guard protects your linkages and shock Available in two sizes, to fit all bikes Weight: 23g (standard), 26g (large)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Front MudguardA unique mudguard, the EnduroGuard Mudguard can be used either on the front of your mountain bike or on the rear. It prevents mud, water and whatever else the trail throws up from the back of the tyre from reaching your face or back. Plus, in addition to keeping you clean, it protects your frame's rear linkages too. Clip on Mountain Bike MudguardAvailable in two sizes, the "standard" model suits shorter travel cross country and 4X forks with 80-120mm travel. The longer "large" model is best for trail, enduro and downhill bikes with 130-200mm travel.Features:Works as a front or rear mudguard Front guard protects you, rear guard protects your linkages and shock Available in two sizes, to fit all bikes Weight: 23g (standard), 26g (large)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Off-Road Mudguard The RearGuard Off-Road is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 20 seconds and stays put!The RearGuard is designed for use off road on either a mountain bike or CX bike, it's a fast fitting mudguard for those last minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back The 3 new creases add stability and strength and the additional length adds protection over rough terrain Features: Quick and easy to fit Offers protection from mud and spray Velcro fastener ensures a secure fit Weight: 41gNot recommended for use with dropper seat posts.Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts RearGuard Clip-On Road Mudguard The RearGuard ROAD is a secure and easy to fit rear mudguard, designed to keep your rear and most of your back dry. Using a Velcro strap, the guard fits in around 10 seconds and stays put!Features: Quick and easy to fit Offers protection from road spray Velcro fastener ensures a secure fitBuy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts EnduroGuard Standard Front MudguardThe EnduroGuard is a unique mudguard, which can be used as a front or rear guard. When used on the front, it stops the mud and spray that the back of the front tyre throws in your face. On the rear, it protects your linkages and shock from mud and spray. Perfect compatibility for cross country or 4x, the standard works on short travel XC and 4X forks from 80mm to 120mm. Features:Works as a front or rear mudguardClip on mudguardWheel & Tyre Compatibility: all wheel sizes and tyres up to 3"Fork Compatibility: 80mm to 120mmWeight: 23g (standard)Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The RearGuard - OFF-ROAD is designed for use off-road on either a mountain bike or CX bike, it's a fast-fitting mudguard for those last-minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back. The 3 new creases add stability and strength and the additional length adds protection over rough terrain.
The Muvi Pro Waterproof Case delivers the maximum waterproof protection to your Muvi HD camera. The case is easy to fit with a quick release mechanism. The case also features a lanyard leash loop, standard trip mount (to be used in conjunction with tripod mount attachment – sold separately), and detachable attachments for universal crocodile clip and body/helmet strap. In the Box Muvi HD Waterproof Case Crocodile Clip Universal Helmet/Body Strap Safety Leash/Lanyard Allen Key Tool Specifications Compatibility: Muvi HD7+, Muvi H10, Muvi HD Pro Waterproof Depth: 60m