The fleece-lined Nightrider waterproof jacket for children has been developed to give your child a jacket that can be used in all conditions. It's waterproof, and customers requested the addition of fleece-lining for extra warmth to give an excellent, all-round jacket suitable for a range of conditions. The Nightrider range gives fluorescent visibility by day and we've used the same retro-reflective material utilised in our best-selling REFLECT360 range to reflect vehicle headlights at night. This helps to ensure that the child wearing the jacket can be more clearly seen and from a greater distance. This helps a driver identify a child's position on the road, whether they are on a bike or scooter, crossing the road or walking on an unpaved backroad.
The Classic cycling gloves are designed in exactly the same way as all of our adult cycling gloves. They have have a day-glow fluorescent outer-layer with reflective trim across the knuckles, cuff and side panel to give good visibility during the day and night. Padded palms help to give enhanced comfort and the silicone web grip gives great grip when it's raining. Underneath the outer layer there is an internal waterproof layer made from a Korean Hipora insert. Korean Hipora consists of a three-layer microporous silicone coating structure. The first layer prevents most water from passing, the second layer is a honeycomb structure that lets moisture in to then let it expel through the first layer, the third layer is a denser layer to added protection against water. The three layers combine to give a breathable and very effective material for cycling gloves due to its thin, lightweight and waterproof properties.
During winter, the hands can be the first to suffer the colder temperatures. With the Classic gloves you'll enjoy extra warmth as the split-finger design keeps the paired fingers together for a boost to warmth and this is further enhanced by the super-soft fleece inner. The all-weather cycling gloves are manufactured using a 100% waterproof outerlayer to give you excellent waterproofing and protection against the elements. The insulated interior ensures extra warmth during the colder months and with the semi-mittened fingers this enables your hands to keep warmer than traditional gloves. The gloves have a silicone web grip gives great grip, especially when it's raining. Underneath the reflective outer layer there is an internal waterproof polyurethane layer made from a Korean Hipora insert. Korean Hipora consists of a three-layer microporous silicone coating structure. The first layer prevents most water from passing through, the second layer is a honeycomb structure that lets moisture in to then let it expel through the first layer, the third layer is a denser insulated layer to give added protection against the colder weather. The three layers combine to give a breathable and very effective material for cycling gloves due to its thin, lightweight and waterproof properties. Soft brushed lining and a soft nose wipe are some added features that come as standard to make these a great all-round winter cycling glove.
During winter, the hands can be the first to suffer the colder temperatures. With the Classic gloves you'll enjoy extra warmth as the split-finger design keeps the paired fingers together for a boost to warmth and this is further enhanced by the super-soft fleece inner. The all-weather cycling gloves are manufactured using a 100% waterproof outerlayer to give you excellent waterproofing and protection against the elements. The insulated interior ensures extra warmth during the colder months and with the semi-mittened fingers this enables your hands to keep warmer than traditional gloves. The gloves have a silicone web grip gives great grip, especially when it's raining. Underneath the reflective outer layer there is an internal waterproof polyurethane layer made from a Korean Hipora insert. Korean Hipora consists of a three-layer microporous silicone coating structure. The first layer prevents most water from passing through, the second layer is a honeycomb structure that lets moisture in to then let it expel through the first layer, the third layer is a denser insulated layer to give added protection against the colder weather. The three layers combine to give a breathable and very effective material for cycling gloves due to its thin, lightweight and waterproof properties. Soft brushed lining and a soft nose wipe are some added features that come as standard to make these a great all-round winter cycling glove.
The Proviz Classic waterproof helmet cover is adjustable and designed to fit over all standard size cycling helmets. It is made from fully waterproof polyester waterproof material and is seam-sealed so not a drop of water will get in. It is elasticated round the edges which can be adjusted to ensure a secure fitting around your particular helmet model and the reflective detail helps to ensure your position on the road is more easily seen at night. It is perfect for commuting in wet winter weather.
The Classic cycling gloves are designed in exactly the same way as our REFLECT360 cycling gloves, except for the reflective outer shell. Instead, these classic gloves have a pink outer-layer with reflective trim across the knuckles, cuff and side panel. Padded palms help to give enhanced comfort and the silicone web grip gives great grip when it's raining. Underneath the outer layer there is an internal waterproof layer made from a Korean Hipora insert. Korean Hipora consists of a three-layer microporous silicone coating structure. The first layer prevents most water from passing, the second layer is a honeycomb structure that lets moisture in to then let it expel through the first layer, the third layer is a denser layer to added protection against water. The three layers combine to give a breathable and very effective material for cycling gloves due to its thin, lightweight and waterproof properties.
The Classic cycling gloves are designed in exactly the same way as our REFLECT360 cycling gloves, except for the reflective outer shell. Instead, these classic gloves have a blue outer-layer with reflective trim across the knuckles, cuff and side panel. Padded palms help to give enhanced comfort and the silicone web grip gives great grip when it's raining. Underneath the outer layer there is an internal waterproof layer made from a Korean Hipora insert. Korean Hipora consists of a three-layer microporous silicone coating structure. The first layer prevents most water from passing, the second layer is a honeycomb structure that lets moisture in to then let it expel through the first layer, the third layer is a denser layer to added protection against water. The three layers combine to give a breathable and very effective material for cycling gloves due to its thin, lightweight and waterproof properties.
The Classic Children's waterproof overtrousers are designed to go over the top of your child's underlayer to keep the rain and the dirt out! They have a multi-purpose design and can be used on the bike as well as in muddy puddles! They have an elasticated waist and hem and we've given them a large amount of REFLECT360 trim to help ensure visibility during the darker days, early mornings or evenings.
The RearGuard - OFF-ROAD is designed for use off-road on either a mountain bike or CX bike, it's a fast-fitting mudguard for those last-minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back. The 3 new creases add stability and strength and the additional length adds protection over rough terrain.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Standard Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer to improve the protection of the face and eyes when riding at high speed. The turndown at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the RapidRacerProducts Proguard Standard Mudguard as a means of offering greater protection for your seals from high-velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight