The carbon Reactor 290 frame is a trail-ready full suspension mountain bike (MTB) frame that is more than capable of handling all the demands associated with all-day epics on the trails. Ready for charging across rock gardens, tree roots and debris, Nukeproof has also kitted out this model with a high-quality RockShox Super Deluxe Ultimate RC2T rear shock that brings exceptional smoothness, and traction tuneability and control to every ride, over all terrain conditions. Designed for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or Play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate gives ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. RockShox Super Deluxe Ultimate Rear Shock Debuting a revolution in damper technology, the RC2T damper, found at the Ultimate level, allows for the most precise compression tuning ever seen—the kind that makes the millisecond’s difference between winning and learning. Tunability’s the name of the game—now you can fine-tune shock feel throughout travel from top to bottom out—or bottomless—it’s up to you to decide. Super Deluxe stakes its claim as the premier performance technology required by riders gunning for the crown. Let the winning legacy live on. Engineered to strike a chord, the new DebonAir+ system was built on the idea of tuneability. Designed to meet the needs of all types of riders, DebonAir+ offers two different air cans to augment each frame’s particular kinematics. Utilizing a needle that rations the flow of oil as the piston moves through the stroke, Hydraulic Bottom Out kicks in within the last 20% of travel, sparing you the pain of that harsh clanking bottom out after impact without sacrificing reactivity or traction. Found in our Super Deluxe lineup, Hydraulic Bottom Out plays nice with our Bottomless Tokens, allowing riders to fine-tune their air spring without worrying about bottoming out. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre, 130mm travel Use: Mountain Bike, All Mountain, Trail Shock: RockShox Super Deluxe Ultimate RC2T, Custom 0L1 32SB tune (L1 compression Tune with Linear Air Can, 0 Neg, 1 Pos Spacer and 320 lockout force) 210x55mm, Bearing End Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro Bearings Weight: 3.5Kgs/7.7lbs (Medium option) RockShox Super Deluxe Ultimate Technologies: RC2T Damper, the most tunable shock damper RockShox has ever made, offers completely independent High Speed and Low Speed Compression adjustments, eliminating “cross-talk” so you can tune your shock to exactly how you want it to perform DebonAir+ air spring maximizes fine-tuning potential, allowing you to tune both the negative and positive air volume to perfectly match your bike, desired ride feel, and the trail ahead The optional Hydraulic Bottom Out kicks in to restrict the flow of oil within the last 20% of travel, offering a soft hydraulic cushion that reduces harsh bottom out 15 clicks of Rebound adjustment offer a wider range of tunability and accommodate more rider types Castled bottom out bumper reduces harsh bottom-out, leaving extra room for the bold to go big Increased bushing overlap maximizes small bump performance and grip Separate and independent Open and Threshold pistons tuned exactly for your ride Fresh new premium graphics package to flash on the podium or as you blaze past your buddies on the doubletrack Top-of-the-line Maxima Plush Dynamic Suspension Lube reduces friction to help maintain traction
This lever and cable conversion kit is specifically designed for mountain bike (MTB) riders who have a Rockshox B-post and a SRAM matchmaker clamp. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category. UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-Diameter Ball-Bearing Pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile Lever: The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-Traction Lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad Compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTESUSBMM
By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers. In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility: Compatible with Rockshox Reverb B Spec Stealth (internal) routing dropper posts. NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
The RockShox Reverb remote enables you to quickly and efficiently raise or lower your Reverb seatpost. The lever sits in place of your front shifter on 1x setups keeping things simple and intuitive.
Easy to use, this quick and efficient RockShox Reverb bleed kit comes with all you need to get your Reverb dropper post working smoothly in no time.
The asymmetrical casing keeps weight to a minimum. Torque Caps further increase the Lyrik's stiffness. The Lyrik features new technologies such as a retuned Solo Air spring with additional negative volume for a plusher initial stroke, Bottomless Token tuneability, SKF wiper seals for lower friction and better sealing and user tuneable rebound damping via internal shims. Subtle refinements to the damper mean that the Lyrik can easily absorb high-speed impacts. Responsive and stiff, the Lyrik is a great option for those looking for longer travel Enduro forks for gnarly riding.
Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes and RockShox's Reverb remote. Left/above, Right/below 10mm Cable Pull, Remote Only (includes remote, cable&housing) - RL (2013+) & Charger Dampers Right/above, Left/below 10mm Cable Pull, Remote Only (includes remote, cable&housing) - RL (2013+) & Charger Dampers
Equipped with strong 32mm stanchions and a stiff, forged aluminium crown for enhanced durability, the performance-oriented RockShox Recon Silver TK forks offer the traction-packed feel of a coil spring. So, whether you’re cruising your local trails with your riding buddies or racing, you’ll be leading the way and climbing onto the podium.
Building upon previous proven success, SRAM have included some of the finest technologies available into the stunning wirelessly operated RockShox AXS dropper for the off-road ride you've always dreamed of. With less effort and zero distraction, this robust dropper post excels on any terrain thanks to IFP technology delivering faster post-actuation with less force needed. Finally, you can even customise its movement to suit your specific riding style via the AXS mobile app, making it the perfect choice of upgrade or replacement for consistent performance. SRAM’s intention with RockShox Reverb AXS dropper seatpost was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. SRAM has created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalisation and connectivity across all AXS enabled components. Technologies: Vent Valve Technology: For super simple service if the need arises without any disassembly of the post Lower friction IFP: Allows for faster actuation of the post and less force needed AXS Technology: Allowing for customisation to an individual rider’s liking via the AXS Mobile App
Ready to conquer any challenge, these forks are kitted out with an aluminium stanchion tube and magnesium lower tube construction which is more than capable of handling all the abuse from rowdy rides. Taking you towards the podium, these are also fitted with a Charger 2.1 RC2 damper which allows for independent high and low speed compression adjustment. This means you'll be able to benefit from a more customisable set of forks which can adapt to suit your riding style and the terrain conditions. DebonAir Equipped MTB Forks Offering you a coil-like consistent feel throughout the travel, RockShox has also equipped these forks with a highly tuneable DH-specific DebonAir air spring. This makes them ideal at absorbing all the sudden knocks from rock gardens, tree-roots and debris as you race for glory. Completed with ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid, these are the ultimate choice of upgrade for riders who want less noise and friction. Technologies: Bottomless Tokens: Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference. Adding the easy-to-install Bottomless Tokens changes the air-spring curve to resist bottom-out after a big hit, giving aggressive riders the power to attack the trail harder. Removing Bottomless Tokens makes the air-spring curve more linear, enhancing suspension feel for certain types of terrain or trail condition and ensuring riders who are less front-end aggressive benefit from 100 percent of their fork’s travel. DebonAir: A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. Sag Gradients: Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won't find this anywhere else but RockShox. BOOST: BOOST is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with short chain stays, wider and stiffer suspension pivots, wider range of chainring options, as well as more clearance for bigger tyres and wider, stiffer wheels. Charger 2.1 Damper: Completely re-designed to reduce hand fatigue and fight unwanted friction, the new Charger 2.1 increases confidence and control over every trail. Maxima Plush Fluid: Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures.
Optimized for use with Reverb and Monarch XX rear shock remote levers, this excellent liquid works hard to keep your system in check.
These MTB forks feature a hard-wearing 35mm tapered wall aluminium upper tube construction and magnesium lower legs, which means that you'll benefit from their impressive strength to weight ratio. This makes them perfect for riders who want a stronger front end without adding unnecessary weight to their MTB. Coming complete with external round adjustment as well as low speed compression adjustment, these forks can be set up to perfectly match your riding style and the terrain conditions. Updated highly tunable DebonAir™ air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. Charger™ RC damper featuring low speed compression adjust. Maxima Plush damping fluid reduces friction and silences damper noise.