DT Swiss R 460 Disc Brake 18mm Road RimThe R460 18mm Road Rim from DT Swiss is a do-anything, go-anywhere model. It is wide, light and strong without breaking the bank. It provides the perfect tyre profile for wider tyres, which are becoming a modern standard. As well as performing to a very efficient level, it features superb reliability and durability, making it highly versatile and ready for any adventure.Features: Material: Aluminium Internal Rim Width: 18mm Rim Height: 23mm Brake Compatibility: Rim Brake Use: Road Type: Tube Type Weight: 450gBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Michelin Pro 3 Race Road Bike TyreWith its advanced dual-compound rubber that has a rigid and durable central area and a soft and flexible sidewall for extra cornering grip, the Pro 3 Race tyre is the smart racer’s choice. Adopting Michelin’s "Energy Compound", this fast rolling and hard-wearing road bike tyre has 6mm thick high grip rubber on each side of the tyre, for reliable grip at all angles. It’s also enhanced with a tough high-density puncture protection nylon belt, so you can confidently ride over poor road surfaces.Features: Tyre Type: Clincher Compound: Soft "Energy" Compound Bead Type: Folding Casing: 127 tpi Puncture Protection: Yes, high density nylon belt Tubeless Compatible: No Recommended Pressure: 87-116 psi ETRTO: 23-622 Weight: 200gBuy Michelin Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Exceptionally breathable and lightweight, featuring a high-density band around the middle of the foot, this sock gives comfort and support where it is needed most.Air MeshAn air mesh construction gives exceptional breathability and comfort.Foot supportA high-density band around the middle of the foot gives additional support.Flat seam constructionFlat seams across the toes give extra comfort.16cm shaft lengthA slightly longer shaft gives extra support around the calf.
The Tubolito Tubo Road Inner Tube is lighter, more resistant to punctures and rolls faster than a standard butyl tube.63% lighter up to 67g weight saving per wheel50% smaller packed size2x more robust at puncture testSuitable for disc and rim brakesWeight: 38g (42mm), 39g (60mm)Tubolito's Tubo Road Inner Tube with Presta valve is suited to 18-28mm wide tyres and boasts a massive 63% weight saving over standard butyl tubes and as a result it has a 50% smaller packed size so it takes up much less space in your saddle bag/jersey pocket. Not only are Tubolito tubes lighter than standard tubes but they are much tougher as they are manufactured with a thermoplastic Polyurethane elastomer, called PU. This group of materials is known for its durability and excellent damping abilities. If you do get a puncture with the Tubolito it ll be quick and easy to repair using the Tubo Flix Kit (sold separately).
The Tubolito Tubo Road Inner Tube is lighter, more resistant to punctures and rolls faster than a standard butyl tube.63% lighter up to 67g weight saving per wheel50% smaller packed size2x more robust at puncture testSuitable for disc and rim brakesWeight: 38g (42mm), 39g (60mm)Tubolito's Tubo Road Inner Tube with Presta valve is suited to 18-28mm wide tyres and boasts a massive 63% weight saving over standard butyl tubes and as a result it has a 50% smaller packed size so it takes up much less space in your saddle bag/jersey pocket. Not only are Tubolito tubes lighter than standard tubes but they are much tougher as they are manufactured with a thermoplastic Polyurethane elastomer, called PU. This group of materials is known for its durability and excellent damping abilities. If you do get a puncture with the Tubolito it ll be quick and easy to repair using the Tubo Flix Kit (sold separately).
TRP Bike Brake CablesetIf your bike’s rim or mechanical disc brakes need a performance refresh, this brake cable kit from component specialists TRP is an ideal choice. The high-quality inner cables combine with the compression-resistant outer cable for smooth, consistent operation when you need it most. The kit also comes with all the inner and outer cable finishing parts, so you don’t have to go digging through your toolbox for spares. With this kit installed on your bike, you’ll instantly enjoy more reliable braking.Features: 2x inner cables (one front length, one rear length) 3m outer cable 4x cable ferrules2x cable end caps2x flexible outer cable ends (if running with v brakes)Buy TRP Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM 2Piece Disc Brake PadsThese hydraulic disc brake pads feature a high-quality organic compound for smooth and consistent braking as well as quieter operation. SRAM has also equipped these with a tough steel backing, which makes them durable and reliable wherever your next ride takes you. Ideal for keeping your hydraulic disc brakes performing as they should. Compatible with SRAM level, DB and Elixir disc brakes. Genuine SRAM spare parts.Features: Pad Type: Organic Backing Material: Steel Use: Road, Cyclocross (XC) and Mountain Bike (MTB) Type: Disc brake pads Compatibility: SRAM Level TL/Level T/Level/Level ULT/TLM B1 (2020+)/DB/Elixir Included: Guide pin, clip and pad spreader Single or Pair: PairCompatible Disc Brake Part Numbers: DB-DB1-A1, DB-DB3-A1, DB-DB5-A1, DB-LVL-TLM-B1, DB-LVL-ULT-B1, ED-FRC-D1, ED-RED-D1, ED-RIV-D1Manufacturer's Part Number: 00.5318.024.001 Grey Organic/Steel Road/CX/MTBBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fitting new brakes or giving your cabling a complete overhaul has never been easier than with the Shimano Road Brake Cable set. The die-extruded PTFE coated inner wire leaves a smooth surface for low friction in use, and stainless steel provides smooth shifting and higher corrosion resistance. Includes 1.6 mm PTFE inner wires (1 x 1000 mm and 1 x 2050 mm), and 5 mm outer casing for a complete bike (1 x 800 mm and 1 x 1400 mm), and all end caps. The outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire.
The Topeak Roadie DA Pump features a Dual-Action (DA) pumping head that inflates tyres rapidly. The Dual-Action technology doubles the volume by inflating on both the push and pull strokes to deliver a high-pressure output saving time and effort.Aluminium barrelSide mount bracket includedPresta compatible with integrated dust capSize: 18.3 x 3.2 x 2.8cmWeight: 95g without gaugeInflating up to 120psi the Roadie DA pump features an aluminium barrel, thumb lock and Presta compatible head with integrated dust cap. Includes side mount bracket and is available with or without pressure gauge.
As a proud descendant of MA2, MA40 and the MA3, the Mavic Open Sport is the perfect blend of success that have made Mavic's rims so popular . The Open Sport has perfect balance of durability, weight and price.ETRTO compatible size: 622 x 15Recommended nipple length: 12 mmRecommended rim tape: 622 x 18 x 0.6Recommended tyre widths: 19 to 32 mmValve hole diameter: 6.5 mm
The Air Tool Road is a minimalistic frame pump that provides efficiency and reliability for high-pressure road tyres. > All new inverted double chamber design increases the air handling capacity by 25% compared to our previous design reducing pumping time by up to two minutes. > Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. > Machined outer barrel for extra grip while pumping.. > All-aluminium inner and outer chamber for durable performance. > Water bottle boss mount included. > Max pressure: 100 PSI (6.9 bar) > Volume-per-stroke: 60cc
What's included? 2 x 16g co2 cartridges 1 x Inflator Head 1 x Closed Base Freeze Protector Sleeve Features: Unique, compact, straight-line design for maximum airflow Simply push down to inflate - Release to stop Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves Manufactured from 6061 aluminium Why use C02 inflators over hand pumps? If the hole in your tyre is so big that sealant can't seal it, your tyre will lose all air pressure and, most of the time, the tyre bead will pop off the bead seat on the rim, creating air gaps all the way around the tyre bead, As anyone who has set up tubeless tyres before will know, getting enough air into the tyre to pop the tyre bead back onto this bead seat isn't easy, even when you're in the comfort of your home workshop, never mind out on the trail with a group of impatient mates - or worse - mid race. A lot of people carry mini hand pumps with them, and they're great for re-inflating small amounts on the trail after slight pressure loss, but you'd need forearms like Popeye to re-seat your tyre with one! Without doubt, the quickest and easiest way to get you back riding while out on the trail, is with a co2 inflator. Not only do they get you back up and riding again much quicker than a hand pump, they are much smaller and easy to carry with you on your ride.