PWR Road 700L is a modular bike light. But it's not JUST another bike light. Not only is it a high powered bike light, but simply take the product apart and you have much more. A lighthead and a PWR Bank to charge devices that is also the battery for all products in the PWR range. BATTERY INDICATOR - Hate it when you run out of battery with no warning? That'll never happen with PWR Road, with 4 built in battery indicator lights. Tap the bottom of the light to activate the battery indicator. 4 lights = fully charged, 2 lights = half charged etc.EASY TO MOUNT & USE - This light can be mounted on top or below your handlebars, directly under your Garmin, or on your helmet. It comes with a side mount and shim that fits handlebars 22.2-38.1mm diameter. Once mounted, using PWR Road is a breeze. It's a simple twist-head operation to turn light on & off and to scroll through light modes.CHARGE YOUR DEVICES - Press the red button to release the light head, and use the PWR bank to charge your phone, GoPro, cycle computer or other device. Charge your PWR Road using the included micro USB cable.WIDE BEAM & CUSTOMISABLE MODES - PWR Road outputs a max 700 lumens, and can run for up to 195 hours on Eco Flash Mode. Its elliptical beam gives broader, bright road coverage. It comes with 6 pre-program d modes, and you can program the light to suit your needs with Modemaker. You can control brightness, adjust runtimes and add new light modes. RUNTIME MODE LUMENS RUNTIME Max 700 1.7hrs Mid 360 3.4hrs Stamina 70 20hrs Pulse 650 7hrs Strobe Flash 275 10hrs Eco-Flash 70 165hrs SPECIFICATION Dimensions - H: 128mm x W: 31mm x L:31mm., Weight - 125 grams., Lumens - 700.,. INSTRUCTIONSConnect lighthead to PWR bank:Insert the two lighthead plug pins into the battery. When connected, your lightheads LED's will flash.Connect lighthead to sidemount:Slide the mount into the slot on the side of the battery. Then tighten the thumbwheel. To remove the mount you will need to loosen the thumbwheel.Operation:Once the lighthead and battery are connected, twist the lighthead and hold to turn on, twist and release to change modes.
Introducing the ultimate road riders light set—the; PWR Road 700, PWR Mount and Mid Cobber Rear.Putting out an impressive 700 lumens, the PWR Road is a part of Knog’s modular bike light range, meaning you can swap light heads, batteries, and use the PWR Bank to charge any device.Also included, is the PWR Mount, designed to discretely tuck the PWR Road 700 directly under a cycling computer using the GoPro style attachment.The Mid Cobber Rear is ‘the worlds safest bicycle light,’ as it projects light in a 330 degree arc, ensuring visibility from all sides. Coming in at 170 lumens, the 100% waterproof Cobber bike light uses an integrated USB charging arm, and a magnetic bracket with replaceable straps designed to accommodate all tube sizes and shapes.This light set is the highest powered road duo in our catalogue, and is perfect for the road cyclist looking to see and be seen further than the rest of the pack.Includes 13025 Computer MountPWR Road 700 Features:Max: Lumens 700 Runtime (hrs) 1.7,Mid: Lumens 360 Runtime (hrs) 3.4,Stamina: Lumens 70 Runtime (hrs) 20,Pulse: Lumens 650 Runtime (hrs) 7,Strobe: Lumens 275 Runtime (hrs) 10,Eco Flash: Lumens 70 Runtime (hrs) 165.Mid Cobber Rear Features:Max: Lumens 75 Runtime (hrs) 2,Mid: Lumens 35 Runtime (hrs) 3.5,Steady Pulse: Lumens 170 Runtime (hrs) 2.5,Flash: Lumens 170 Runtime (hrs) 6.5,Rolling Flash: Lumens 70 Runtime (hrs) 4.5,Side Flash: Lumens 100 Runtime (hrs) 2,Disco Flash: Lumens 80 Runtime (hrs) 4.5,Eco Flash: Lumens 15 Runtime (hrs) 100.
Packaged together, the PWR Road 700 and Blinder Square Rear make the perfect pair.Putting out an impressive 700 lumens, the PWR Road is a part of Knog’s modular bike light range, meaning you can swap light heads, batteries, and use the PWR Bank to charge any device.Also included, is the PWR Mount, designed to discretely tuck the PWR Road 700 directly under a cycling computer using the GoPro style attachment.The Blinder Square, a 100 lumen rear light, is fully waterproof, features an integrated USB recharging arm and comes with three different replaceable silicone straps designed to accommodate any seat tube or frame size.This light set is as powerful as it is versatile and is a must have for any road cyclist.Includes 13025 Computer Mount PWR Road 700 Features:Max: Lumens 700 Runtime (hrs) 1.7,Mid: Lumens 360 Runtime (hrs) 3.4,Stamina: Lumens 70 Runtime (hrs) 20,Pulse: Lumens 650 Runtime (hrs) 7,Strobe: Lumens 275 Runtime (hrs) 10,Eco Flash: Lumens 70 Runtime (hrs) 165.Blinder Square Rear Features:Max Steady: Runtime (hrs) 2.5,Eco Flash: Runtime (hrs) 55.
Chip on board LED’S & side illuminationFitted with advanced cob led technology means, the r-150 produces a superbright and consistent beam of light covering a wide area. The cobs wide beam angle, in addition to lens geometry specifically designed for side illumination, allows for 200 degrees of visibility.Multi-channel LED’S & spectacular flash patternsThrough its use of advanced cob led technology and seven dedicated lighting channels, the r-150 is able to produce arresting visual patterns that are almost impossible to miss. Wide-beam cob and focused strobe led combined with high output, and eye catching patterns means this light is highly visible when used in day or night.Super brightProducing a powerful 150 lumens, the r-150 is bright enough for use day or night in any riding conditions.100% waterproofWith an ip67 rating, this light can be summered in 1 meter of water and still come out shining.Convenient usb rechargingRecharged via integrated usb-a means there is no requirement for single-use batteries or charging cables. Recharged from flat in three hoursDedicated strobe LEDThe r-150's exceptional visibility is also aided via a dedicated high powered strobe led on its own channel. This allows the strobe element of this light to operate independently from the rest of the LED’S. Finally, with the strobe led focused optic set at an angle of 12°, it means that even when mounted on a seat tube, the r-150 strobe is pointing in the right direction (parallel to the road) to maximise visibility at long distances.Charge indicatorconvenient led glows green whilst the light is charging and turns off when the light has achieved full charge capacity.Low battery indicatorNo need to guess when you're light need to be recharged with a convenient led that lights up red when your light dips below 10% remaining charge.Light weightWeighing just 40 grams this is lightweight in all the right ways.8 modesThe r-150 has eight modes to choose from, including: a 50hr runtime, so whether you are looking for the longest run time or the most eye catching light pattern, the r-150 has a range of options to pick from.
A repair kit with all the essentials to get your road bike rolling again if you puncture out on the ride. The compact boxes mean that they can be taken out and fit anywhere making them a must-have when out on a ride. The stainless steel grater is efficient no matter what is on the tube or tyre. 6 Patches (Dia: 15mm) / 1 Rubber Cement 5g / 1 Stainless Steel Grater .
Key Features:5-pack of Dynaplug soft nose brass tip repair plugs with a shorter tail for use in the road Air system,Essential for the correct use of the Road air system, the longer tails of standard plugs will block the CO2 vents on the short Road Air system nozzle and prevent proper operation,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,If a single plug is not enough to seal a hole, just fold the -ætail-Æ flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugs,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,Made with pride in the USA using patented technology.
Shimano hydraulic Disc brake bleed funnel,Kit includes: Master cylinder oil funnel with base and oil stopper,M7 thread for direct attachment to road BL/ST's,Shimano recommend that you only use genuine Shimano hydraulic mineral oil in Shimano hydraulic Disc brake systems.
Key Features:The AR2 is designed for use with tyres up to 40mm wide,Particularly suited to 700c road, all road and gravel bikes,Integrated fender plate and rear reflector/light mount,Slimline design with a 45mm upper width,Independently adjustable leg length,Tough anodised finish to resist corrosion,487 grams with fittings.
The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. Features an innovative top plate which can be adjusted on a convex track, to keep it level to the ground, independent of fork angle. Integrated QuickTrack™ system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with RackTime® Snapit system bags.
MTX 2.0The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all rear rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack® system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Note:*TetraRack is not recommended for carbon forks and seat stays*TetraRack series racks are not compatible with front or rear mounted V-Brake type systems.Attachments - Seatstays with hook and loop straps,Adjustments - Strut slots,Material - Aluminium / Engineering grade polymer / Nylon straps,Compatibility - Topeak MTX / RX TrunkBags,Max Load - 9 kg / 20 lb,Added Feature - Clamp for rear reflector, Tail Light Mount,Size - 39.5 x 30 x 12 cm / 15.6” x 11.8” x 4.7”.
School, park, or neighborhood trails, kids and bikes go places. No matter where their wheels take them, the Smith Zip Jr. bike helmet delivers enhanced angle impact protection with MIPS® in a lightweight design that kids want to wear. Our dial-adjustable VaporFit™ gets the fit right every time. There's a low-profile lining for extra comfort plus plenty of vents to keep the air flowing and kids cool. Just buckle 'em up and start pedaling.ProtectionLightweight in-mold construction,MIPS® Brain Protection System reduces rotational forces caused by angled impacts to the head.Fit/IntegrationVaporFit™ dial adjustment system offers 270-degree fit adjustment with the turn of a dial,Designed for ultimate integration with Smith performance eyewear for maximum comfort, venting and storage convenience, AirEvac™ ventilation system integrates with Smith goggles and eyewear for fog-free lenses.Key Features21 fixed vents for consistent airflow,Performance comfort lining,Lightweight, low-bulk single layer webbing,Weight: (Size XS, MIPS®): 8 oz / 240g.
From the engineers at Zipp, comes the all-new 302 Carbon Clincher. With a 45mm deep Indianapolis-made carbon rim, optimized for low aerodynamic drag and precise handling in all riding conditions, the 302 Carbon Clincher delivers the ride that Zipp wheels are renowned for at a price that makes Zipp carbon quality and performance more attainable than ever.To keep the wheels light and easy to service we’ve used a center locking brake rotor mounting interface on our 76D/176D hubs. The 76D/176D hubset also features replaceable axle end caps for thru-axle compatibility. Add in the 302’s XDR driver body compatibility, and you have a wheelset that can meet the needs of virtually everyone. And like all of our carbon clinchers, the 302 uses the same rim bed design that makes tire removal and installation as easy as possible.The 302’s smooth carbon rim is hand assembled to Zipp’s new 76D/176D hubs using Belgian CX-Sprint spokes and brass spoke nipples to build a wheel that is both fast and reliable—tough enough to survive the Spring Classics or the road less travelled, yet light enough to tackle the steepest grades.302 rims, like all of our carbon clinchers, are proudly made in Indianapolis. Since Zipp’s inception in 1988 we’ve chosen to handcraft our carbon rims here for one reason: Precision. With complete control of the manufacturing process from start to finish, we build wheels that set the industry standard for precision. Rigorously inspected at our Indianapolis factory, we ensure that only the world’s best wheels receive the Zipp label—and we are proud to make this level of quality more attainable than ever with the 302. The 45mm rim depth provides proven aero benefits with high stability, yet the 302 remains nimble to make this a wheel for all terrain and wind conditions.To keep the wheels light and easy to service we’ve used a splined brake rotor mounting interface for quick and easy rotor installation and removal. The 76D/176D hubs also feature replaceable axle end caps for through-axle compatibility. Add in the 302’s XDR driver body compatibility, and you have a wheelset that can meet the needs of virtually everyone. And like all of our carbon clinchers, the 302 uses the same rim bed design that makes tire removal and installation as easy as possible.Experience Zipp speed with the 302 Disc-Brake.,Each 302 Disc-Brake Wheel Includes:,Zipp valve extenders,Zipp rim tape,SRAM XDR driver body for 176D hub available separately.