Unique CeramicSpeed ceramic bearings are premium quality, out-performing mark rivals. The CeramicSpeed Ceramic Bottom Bracket system is so stiff and efficient that additional spacers are not required. At a fantastically lightweight of 84 grams, this CeramicSpeed Ceramic Bottom Bracket is a premium upgrade that your trusty steed deserves.
Unique CeramicSpeed ceramic bearings are premium quality, out-performing mark rivals. The CeramicSpeed Ceramic Bottom Bracket system is so stiff and efficient that additional spacers are not required. At a fantastically lightweight of 84 grams, this CeramicSpeed Ceramic Bottom Bracket is a premium upgrade that your trusty steed deserves.
This is a genuine Vitus replacement gear hanger that's specifically designed for use with the 2019 onwards Substance CR/CRS/CRX frames and other models too (see compatibility list in our features section). It is ideal for replacing your old or worn-out existing model. Click here to view and download the Gear Hanger Cheat Sheet to ensure compatibility with all Vitus hangers.
To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Slick-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect. Technologies: CSX: High carbon, low compression coiled steel around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-EL: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance. What's Included: (1) 2200mm CSX Brake Housing (1) 1350mm STS-EL Elite Polished Ultra-Slick Front Brake Inner Cable (1) 2000mm STS-EL Elite Polished Ultra-Slick Rear Brake Inner Cable (1) 1275mm Slick-Lube Liner (1) 1925mm Slick-Lube Liner (2) Open Brass End Caps (4) Open Alloy End Caps (2) Cable Tips (2) Grub Seals (2) 5G Tube Tops (2) Rotating Hooks
To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect. Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance. What's Included: (1) 1700mm XEX Shift Housing (2) 2225mm Speed-Lube Liners (2) 2300mm STS-LF Polymer-coated Shift Inner Cables (2) LEX-SD 4mm Shift Housing Segments, 300mm (3) Open Brass End Caps (4) Open Alloy End Caps for 5mm Housing (2) Open Alloy End Caps for 4mm Housing (2) Pro Indexed Inline Adjusters (4mm/5mm) (2) Housing Connectors (4mm/5mm) (2) Non-Crimp Cable Tips (2) Grub Seals (2) 5G Tube Tops (2) Rotating Hooks
Whether you're competing, training or wanting to take your riding performance to an all-time high, this state-of-that-art model offers some of the most advanced recording technologies possible. Easily connect to your smartphone or cycling device via Bluetooth Smart or ANT+ and export your data for training analysis with platforms such as TrainingPeaks.com. Improve your pedal stroke performance thanks to its higher data sampling rates which are achieved by recording power via 4 sets of opposing gauges. Both your left and right legs are independently measured to provide accurate data about your pedal stroke balance, power output, cadence and torque effectiveness. You will be able to see exactly where you need to up your game in terms of essential improvements thanks to the dual leg measurement showing the individual performance in each of your legs. This model is a powerful tool for measuring your unique pedalling biomechanics via the Rotor Power application. You can access real-time performance rich data including proprietary metric Torque 360, Optimum Chainring Angle (OCA) and a recommendation of your Optimal Chainring Position (OCP). Direct mountable, this model includes a clever spline interface between your crank arm and chainrings for superior stiffness and direct transfer of your pedalling torque. With a user-friendly setup and straight-forward calibration with a rechargeable battery life of up to 250 hours which can easily be charged via a magnetic connector, this is the ultimate choice of power meter crankset for pushing your road cycling performance to the top. Technologies: Data Transmitted: Power, cadence, balance, torque effectiveness and pedal smoothness for each leg via standard ANT+™ protocol and Bluetooth Smart®. L/R independent or combined pedal analysis using Optimum Chainring Angle (OCA) and TORQUE 360 metrics in the User Software environment and the ROTOR Power app for smartphones. Specs: Head Unit: ANT+, Bluetooth® Smart; compatible ANT+ head units: http://www.thisisant.com/directory Analisys software: Trainingpeaks.com/ROTOR Software: ROTOR 2INpower app, ROTOR 2INpower User Software Q-Factor: 147.5 mm Chain line: 43.5 mm Sizes available: 165 / 170 / 172.5 / 175 mm Spider available: ROTOR Direct Mount chainrings, oval and round Battery Specifications: Rechargeable Li-ion + USB cable Estimated Battery Life: 250 hours riding time Water Resistance: IPX7 Strain Gauges: 4 gauges in the axle and 4 in the right crank arm Wireless Technology: ANT+ 2.4 Ghz/ Bluetooth® Smart Compatibility: BB30 / PF30 / PF30 BBright / BB386 / BSA / ITA / BB Weight: 775 g (596 g without chainrings)
This brilliant model features a solid aluminium construction that's more than capable of handling all the challenges of a long day out on the road. Furthermore, it's also been through Token's extensive CNC-machining process which shaves off any unnecessary weight, so you won't have to worry about adding any excess weight to your ride. Lightweight and Durable Bottom Bracket Perfect for riders who brave the elements, this stunning version features dual lip, labyrinth low-friction rubber seals which provide superior water-resistance. This is an ideal choice of upgrade for road cyclists who want a smoother and lighter bottom bracket which also offers less transmission resistance on every ride.
These are high-performance pedals which have been specifically designed for road racing and offer a super light aluminium construction combined with a CNC machined Cr-Mo axle for the ultimate pedalling performance.
Equipped with a top-end, high-strength carbon fibre body, this durable road pedal features a sealed cartridge outer bearing for a smooth, low maintenance spin. A low-profile cleat-to-axle engagement increases pedalling efficiency, while the tension can be adjusted with extra-strong springs for more powerful riders. Compatible with Ritchey and Look Keo cleats, the pedal is also kitted out with a wear-preventing, no noise stainless steel cleat plate, keeping you seamlessly attached to always be at one with your bike.
Featuring a mixed tread pattern for taking on the most taxing road surfaces, this dependable road tyre uses an innovative ProTite belt and AX-Alpha Cord casing to keep you protected from dangerous debris on your rapid journeys. Made using a ZSG compound also for a super-grippy experience, this Panaracer model lets you make the most of your mixed-terrain adventures.
Ideal for when it's time to service your road bike's BB30 bottom bracket (BB) or for simply keeping as a spare, this kit is designed for simple, straightforward BB maintenance. It includes two high-quality stainless steel cartridge bearings, a wave spring, bearing covers, circlips and nylon adjustment washers. This means that you'll have everything you need to quickly restore your setup to its original smooth-running performance. This kit contains genuine FSA replacement parts. Manufacturer's Part Number: 200-3002 Black BB30
You won’t believe something so small will work so well, but it does! No winches, hooks or balancing acts, just a satisfying “clug” and you’re all set. Why is it so great? Why? Well because it helps you save space, keep your place tidy and display your ride proudly without damaging it or your walls. This Clug bike rack will turn almost anywhere. How to choose your Clug? Clug is designed to be a great fit with just about every bike tyre out there. There are three versions of the Clug - one to fit standard road bike tyres between 23 and 28mm, one to fit hybrid tyres between 33 and 42mm and one to fit big fat mountain bike tyres 1.75 - 2.5". How to install? It couldn't be easier! Just follow the steps included in your package with your Clug and you'll be done and Clugging in no time flat. Size guide: Roadie: This size is designed to fit Road Bike Tyres - small and lean. If your tyre is between 23 and 32mm (Just over 7/8" to 1.25") then this is the size for you! Hybrid: This size is designed to fit Hybrid Tyres - comfortable and wide but not too knobby. If your tyre is between 33 and 42mm (1.25" to 1.75") then this is the size for you. MTB: This size is designed to fit Mountain Bike Tyres - knobby and ready to shred trails. If your tyre is between 1.75" and 2.5" (44mm to 63mm) then this is the size for you. MTB Plus: This size is designed to fit plus-sized Mountain Bike Tyres - grippy and ready to tame harsh terrain. If your tyre is between 2.75" and 3.2" (70mm to 81mm) then this is the size for you. MTB XL: This size is designed to fit extra-large Mountain Bike Tyres - bold knobs and trail-ready. If your tyre is between 2.3" and 2.7" (58mm to 69mm) then this is the size for you.