The Descendant 35mm has been specially designed with downhill and enduro riders in mind for the ultimate off-road experience. Boasting ultra-tough Al-7050 aluminium construction for years of long-lasting use alongside its 760mm width for stiff, precise and positive steering. This is a perfect choice of replacement or upgrade for pushing your performance to the max.
Designed to offer precise and reliable handling in the toughest of conditions, the Descendant bars offer you the durability to handle any trail you can and the performance you need to dominate them!
The Atmos 7k aluminium riser bar series feature a 9° back sweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminium, the bar weighs just 250g at full width.760mm wideWide to start and trimmable by 30mm each sideMade from tough 7050 lightweight aluminiumSpecifications:Clamp diameter: 31.8mmWidth: 760mmMaterial (HB): Al-7050Colour/finish (HB): Blast BlackRise (HB): 0mm, 10mm or 20mmApplication (HB): XCType (bar): RiserBack sweep (degrees): 9Upsweep (degree): 5
The Atmos 7k aluminium riser bar series feature a 9° back sweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminium, the bar weighs just 250g at full width.760mm wideWide to start and trimmable by 30mm each sideMade from tough 7050 lightweight aluminiumSpecifications:Clamp diameter: 31.8mmWidth: 760mmMaterial (HB): Al-7050Colour/finish (HB): Blast BlackRise (HB): 0mm, 10mm or 20mmApplication (HB): XCType (bar): RiserBack sweep (degrees): 9Upsweep (degree): 5
Prepare to ride any terrain with this handlebar stabiliser.
The Thomson Carbon 35mm Riser Handlebar is 800mm wide, offering 10mm and 20mm of centre rise together with a 9° back sweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.Centre Rise: 10mm and 20mm optionsBack sweep: 9 degreesUp sweep: 5 degreesToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed. They are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it s the best bar for your Thomson X4 stem. It s also certified to EN, tested to DIN+.
The Thomson Carbon 35mm Riser Handlebar is 800mm wide, offering 10mm and 20mm of centre rise together with a 9° back sweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.Centre Rise: 10mm and 20mm optionsBack sweep: 9 degreesUp sweep: 5 degreesToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed. They are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it s the best bar for your Thomson X4 stem. It s also certified to EN, tested to DIN+.
The Thomson Carbon Riser Handlebar is 750mm wide, offering 15mm of rise together with a 8° back sweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.Centre Rise: 15mmBack sweep: 8 degreesUpsweep: 5 degreesToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceWeight: 215gThe bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed. The bars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders. All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it s the best bar for your Thomson X4 stem. It s also certified to EN, tested to DIN+.
Crafted in a regular fit from lightweight fabric, The North Face Women's Printed Sunriser Running Tank features moisture-wicking FlashDry™ technology to keep you dry and a jacquard-knit back for enhanced breathability when on the move. Rolled-forward shoulder seams keep you free from irritation and focused while a stretch woven front panel increases comfort and a scoop tail offers extra coverage. Made with recycled materials to reduce landfill waste and finished with reflective detailing and an eye-catching Trail Marker print that reflects our athletes' favourite races.
Adjustable stem with integrated 60mm rider to provide additional handlebar lift. Includes a secure four bolt clamp.Strong 6061-T6 Alloy,Bar Bore: 31.8mm,Adjustment: -10° - +60°,Black,1 1/8”.
High quality 6061 Aluminium riser bar suitable for MTB/Hybrid/fixie use25.4mm bar diameter590mm Width50mm Rise9 degree Backsweep.
Adjustable stem with integrated 60mm rise to provide additional handlebar lift. Includes a secure four bolt clamp. Strong 6061-T6 Alloy Bar Bore: 31.8mm Adjustment: -10° - +60° Black 1 1/8”