Same RS experience but in aluminumLike its carbon sister, Rise Aluminum’s power comes from an EP8 RS motor, developed in an exclusive collaboration between Orbea and Shimano.Orbea acted on the motor firmware to offer the most natural and efficient assistance as possible, eliminating drag and power delay that’s typical of conventional ebikes. The motor was also optimized to provide maximum assistance between 75 and 95 strokes per minute, the cadence at which the human body pedals the most efficiently and where we normally pedal our standard mechanical bikes.This means that the harder we pedal, Rise responds instantly with more power, with a feeling of natural assistance.Another unique aspect of the RS philosophy is its autonomy. Due to the lower power consumption, the lower weight of the bike and the greater dependence on the rider’s legs, the battery in Rise lasts about 50% more compared to a standard ebike. This translates into surprising autonomy for the 360Wh battery in the carbon models and a whopping 540Wh in the aluminum models with a completely redesigned battery.Weight is another key to Rise and something Orbea invested many hours in to optimize the details of the models: frame, integrated battery, cable routing and push buttons were taken into account. Motor optimization through the Rider Synergy also allows for trail components to be mounted, which saves weight and enables the bike to handle like a mechanical trail bike.The lightest in the category, also in aluminumNatural pedaling and handling are the two aspects that differentiate Rise the most. To keep these characteristics intact in the aluminum versions, Orbea’s engineering team scrutinized all the details and invested many hours in development.The recently debuted aluminum version features a completely redesigned 540Wh battery, developed by Orbea, who rethought the distribution of the 21,700 cells, the housing arrangement, the wiring and the brackets to find a battery that is as optimized and lightweight as possible and with one of the highest energy densities on the market.For the frame, Orbea selected the best materials and applied the most advanced manufacturing processes, just as it does for its highest-level carbon frames. Thanks to the double- and triple-butted, hydroformed tubes, the team optimized the thickness and shapes of the tubes and reinforced the most delicate areas. In other words, it saves weight where you don’t need material and adjusts the stiffness in the important areas.In effort to give the highest level of attention to the new aluminum version, Orbea applied its polishing process to the frame. This technique smooths the welds at the tube joints, matching the aesthetics of a carbon frame. In fact, it’s difficult to discern the differences between an aluminum frame and carbon frame. This process also increases aluminum’s fatigue resistance in critical areas.All this design and development work has resulted in an aluminum frame weight of merely 3.4kg — just 100g more than an Occam aluminum frame and 2kg lighter than most aluminum ebikes on the market. The total weight of the new aluminum Rise is an impressive 19kg for the top-of-the-range model and 20kg for the entry-level model.
The Sam Hill Series Riser Bar builds on the success of Nukeproof's Warhead riser bars and benefits from the 5-time Downhill Word Champions feedback. This bar offers you strength and comfort for your bike's cockpit and a very aesthetically pleasing finish.Unique CoatingThe acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. These bars soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections whilst also maintaining the necessary strength to endure tough spills and impacts.Features:Material: 7050 Aluminium,Finish: Acid dipped micro shot-peened,Bar Diameter: 31.8mm,Back-sweep: 9°,Up-sweep: 6°,Built for: Trail, All Mountain, Enduro, Downhill, Freeride,Weight: 292g (780mmx25mm rise).
Tried and tested double butted 6061 T6 aluminium bar with a high 55mm rise for an aggressive, upright, over-the-front racing position. Key Features: Width: 600mm,Diameter: 25.4mm,Handlebar Rise: 55mm.
Ready for aggressive MTB rides, this riser bar delivers high performance from its hand crafted construction and rigorously tested design. It features a high modulus graphite carbon fibre construction, which combines both UD and 3K weave to give you a superior strength to weight ratio on the trails. Brand-X has also ensured that each riser bar is tested and certified to ISO 4210-2 standards, so you can be assured its more than capable of handling the most demanding of MTB rides. Available in 3 risers - 12mm, 25mm and 38mm and two widths- 780mm and 800mm, depending on your riding style and preference, all in 31.8mm clamp. Particle paint on the bar ends and clamp areas provide additional friction and prevent slip. Graphics are subtle and finishing is a matte black. Key Features: Material: Carbon,Finish: Matte,Backsweep: 9 degree,Upsweep: 6 degree,Use: Trail, All Mountain, Enduro, Downhill and Freeride,Weight: 780mm 31.8mm 25mm (240g); 800mm 31.8mm 25mm (242g),2 Year Manufacturer Warranty.
The Nukeproof Horizon Carbon Riser Bar was developed to be lightweight and comfortable, while far exceeding the strength and durability of an aluminium bar. In fact, the Horizon carbon bar far exceeds the strength of many leading carbon bar competitors in laboratory testing, withstanding loads of over 700kg. High Strength and Damping This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty! Key Features: Material: Carbon,Backsweep: 9°,Upsweep: 6°,Use: Trail, All Mountain, Enduro, Downhill, Freeride,Weight: 260g (800mm x 35mm rise).
This revised riser bar is designed for fast-paced mountain bike adventures as it offers incredible control as you blast across the mountain. It features a unidirectional carbon construction, which means you'll enjoy its amazing strength without any excess weight. Nukeproof has also gone the extra mile by equipping it with 3K carbon ends. This adds another layer of durability where your grips are clamped, as well as providing greater impact resistance against obstacles. Carbon Riser Bar with 31.8mm Clamp Prepared for day-long MTB rides, this riser bar features an updated design with a unique offset profile. Its fine-tuned offset reduces the overall arc by 10mm, which makes it closer to the geometry the bike manufacturer wanted you to have. One final highlight is it comes complete with a 31.8mm clamp and technical markings on the top, which means you can set up the Nukeproof Horizon V2 Carbon Riser Bar 31.8mm while on your bike. Key Features: Material: UD Carbon with 3K outer ends,Use: MTB,Backsweep: 9°,Upsweep: 5°,Clamp Diameter: 31.8mm,Weight: 232g (25mm rise version).
This durable handlebar is specifically designed for intense MTB use, as it offers outstanding control across the mountain bike trails. It features a hard-wearing alloy construction, which makes it more than capable of handling all the abuse that comes with weaving from trail to trail. Nukeproof has also equipped it with a shot-peened finish, which provides an extra layer of durability during unpredictable mountain bike adventures. MTB Riser Bar with 35mm Clamp All set for fast-paced MTB rides, this trail-ready riser bar features a revised design with a unique offset profile. Its optimised offset reduces the overall arc by 10mm, which makes it closer to the geometry the bike manufacturer wanted you to have. Coming complete with a 35mm clamp and technical markings on the top, the Nukeproof Horizon V2 Alloy Riser Bar 35mm is a perfect choice of upgrade for riders who want superior performance on every MTB ride. Key Features: Material: 7075 Alloy,Finish: Shot-peened,Use: MTB,Backsweep: 9°,Upsweep: 5°,Clamp Diameter: 35mm,Length: 800mm,Weight: 290g (25mm rise version).
This handlebar is engineered for aggressive mountain bike use, as it delivers excellent control as you blast across the MTB trails. It features a rock-solid alloy construction, which makes it perfect at withstanding all the intensity that comes with all-day epics in the mountains. Nukeproof has also equipped this trail-ready handlebar with a shot-peened finish. This means you'll benefit from its additional layer of robustness, as you weave from trail to trail. MTB Riser Bar with 31.8mm Clamp Prepared for fast-paced MTB rides, this riser bar features an updated design with a unique offset profile. Its optimised offset reduces the overall arc by 10mm, which makes it closer to the geometry the bike manufacturer wanted you to have. One final highlight is it comes complete with a 31.8mm clamp and technical markings on the top, which makes the Nukeproof Horizon V2 Alloy Riser Bar 31.8mm an ideal choice of upgrade for riders who want a quick and easy set up. Key Features: Material: 7075 Alloy,Finish: Shot-peened,Use: MTB,Backsweep: 9°,Upsweep: 5°,Clamp Diameter: 31.8mm,Length: 800mm,Weight: 290g (25mm rise version).
The Brand-X Mountain Bike Riser bar comes in a trail friendly 740mm width, with 9 Degree backsweep and 5 Degree upsweep to ensure they are comfortable all day long. In order to make sure they suit your set up we also offer a 15mm or 25mm riser option. Manufactured from double butted 6061 Aluminium; they are both lightweight and strong. They feature a sand blasted and anodised finish for fatigue resistance and durability. All graphics are laser etched including centre and incremental markings to make positioning and cutting down nice and easy. Key Features: Material: 6061 double butted aluminium,Clamp Diameter: 31.8mm,Backsweep: 9°,Upsweep: 5°,Finish: Sand blasted and anodised for fatigue resistance and durability,Graphics: All laser etched that includes centre and incremental lines,EN-M Approved,Weight: 300g.
This riser bar is engineered for fast-paced MTB rides, as it gives you exceptional strength and control on your mountain bike.It features a hard-wearing alloy construction, which makes it more than capable of handling all the abuse that's associated with shredding the mountain bike trails.Nukeproof has also put this riser bar through a shot-peening process, which gives it extra durability as you tackle all the challenges that are associated with all-day epics in the mountains. Key Features: Material: 6061 Alloy,Finish: Shot-peened,Backsweep: 9 degrees,Upweep: 5 degrees,Length: 800mm,Diameter: 35mm,Technical Markings: Markings on the top of the handlebar,Weight: 385g (25mm rise version).
The Sam Hill Series Riser Bar builds on the success of Nukeproof's Warhead riser bars and benefits from the 5-time Downhill Word Champions feedback. This bar offers you strength and comfort for your bike's cockpit and a very aesthetically pleasing finish.Unique CoatingThe acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. These bars soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections whilst also maintaining the necessary strength to endure tough spills and impacts.Features:Material: 7050 Aluminium,Finish: Acid dipped micro shot-peened,Bar Diameter: 31.8mm,Back-sweep: 9°,Up-sweep: 6°,Built for: Trail, All Mountain, Enduro, Downhill, Freeride.
The RS Range Extender mounts to the Rise in seconds and offers a flexible way to add extra range to your rides.The RS Range Extender gives you another 252 Wh (70%) for those extra long rides. Adding the RS Range Extender to the Rise gives a range comparable to that of a 900 Wh battery on a normal electric bike. Under typical conditions this means around 8 hours of riding and more than 4,000 m of ascent in Eco mode.CompatibilityCompatible with Rise M Models.Go FurtherOur RS Range Extender gives you another 252 Wh (70%) offering a range comparable to that of a 900 Wh battery on a normal electric bike. Under typical conditions this means around 8 hours of riding and more than 4,000 m of ascent in Eco mode.Secure MountingUsing our patent pending design, the range extender is securely held in the bottle cage. The cable from the range extender to the standard charging point fits securely and quickly and won't interfere with the pedals.FlexibleThe RS Range Extender Cage is compatible with water bottles. Our patent pending design, is the first high capacity range extender of over 250 wh, that can be replaced with a standard water bottle in just a second.SPECIFICATIONSCAPACITY: 252 Wh,WEIGHT: 1.4 Kg,70% extr autonomy.