Nukeproof Sam Hill Series MTB Riser HandlebarThe Sam Hill Series Riser Bar builds on the success of Nukeproof's Warhead riser bars and benefits from the 5-time Downhill Word Champions feedback. This bar offers you strength and comfort for your bike's cockpit and a very aesthetically pleasing finish.Unique CoatingThe acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. These bars soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections whilst also maintaining the necessary strength to endure tough spills and impacts.Features: Material: 7050 Aluminium Finish: Acid dipped micro shot-peened Bar Diameter: 31.8mm Back-sweep: 9° Up-sweep: 6° Built for: Trail, All Mountain, Enduro, Downhill, Freeride Weight: Weight: 313g (780mm x 20mm)Handlebar instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This bar offers you strength and comfort for your bike's cockpit and a very aesthetically pleasing finish. Unique Coating The acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. These bars soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections whilst also maintaining the necessary strength to endure tough spills and impacts.
The Sam Hill Series Riser Bar builds on the success of Nukeproof's Warhead riser bars and benefits from the 5-time Downhill Word Champions feedback. This bar offers you strength and comfort for your bike's cockpit and a very aesthetically pleasing finish.Unique CoatingThe acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. These bars soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections whilst also maintaining the necessary strength to endure tough spills and impacts.Features:Material: 7050 Aluminium,Finish: Acid dipped micro shot-peened,Bar Diameter: 31.8mm,Back-sweep: 9°,Up-sweep: 6°,Built for: Trail, All Mountain, Enduro, Downhill, Freeride,Weight: 292g (780mmx25mm rise).
The Sam Hill Series Riser Bar builds on the success of Nukeproof's Warhead riser bars and benefits from the 5-time Downhill Word Champions feedback. This bar offers you strength and comfort for your bike's cockpit and a very aesthetically pleasing finish.Unique CoatingThe acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. These bars soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections whilst also maintaining the necessary strength to endure tough spills and impacts.Features:Material: 7050 Aluminium,Finish: Acid dipped micro shot-peened,Bar Diameter: 31.8mm,Back-sweep: 9°,Up-sweep: 6°,Built for: Trail, All Mountain, Enduro, Downhill, Freeride.
These handlebars have 25mm rise which is perfect for those up and coming shredders and their acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. The Urchin bars easily soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections. Please Note: Safety caps for the bar ends are also supplied with these handlebars. We recommend fitting these before fitting grips to prevent injury should the end of the grip get damaged. Additional Features: Supplied with safety caps for the bar ends Built for: Trail, All Mountain, Enduro, Downhill, Freeride
Working closely together Oakley and snowboard legend Shaun White embarked on creating a new sunglass design, this collaboration saw the birth of the 'Holbrook'. Looking to the past for future inspiration they re-visited vintage styles like the original Oakley 'Frogskins', then set out to distil their own vision of American cool.Lightweight O Matter frame material with Square O metal icon and front rivet accents6 base lens geometry with HDOPolarized and Iridium options available Prescription LensesAvailable with Prizm lenses to enhance color, contrast and detail for an optimized experienceIts design is a timeless classic that echoes the screen heroes from the 40s, 50s and 60s, icons who inspired youth with their own brand of defiance. Who was the legend Sometimes a loner and sometimes a leader, someone who lived by a code, stood up for what was right and did what needed to be done. You wouldn t call him a man s man because that macho crap meant nothing to him. What you saw was what you got, including dust from the open road and a look that said he might be gone tomorrow because nothing could hold him.The name 'Holbrook' came from a similar inspiration...a small town found along historic Route 66 in Arizona that sits on the outskirts of the painted desert and the petrified forest. It s a classic western bad-land that epitomises a spirit of exploration and adventure found in those travelling along Highway 66 in the 50 s and 60 s.
Odyssey's 49er is a traditional looking 4-piece bar that uses multi-butted main tubing, traditional 7/8" crossbar for strength, larger radius bends for greater durability, welded end caps to reduce flex. ###section### Product Specs Rise: 9" Width: 29" Up Sweep: 1.5° Backsweep: 12° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: TBC ###section### ###shogun-image-section###
Broc Raiford's signature Odyssey bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow pre-cut 29" width and slightly less backsweep at 10°. ###section### Product Specs Rise: 9.8" Width: 29" Up Sweep: 2° Backsweep: 10° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
The perfect mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty. ###section### Product Specs Rise: Width: 29" Up Sweep: 1° Backsweep: 11° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
Description for Odyssey Uppercut Bars Rust Proof Black / 9" Rise not available
Same RS experience but in aluminumLike its carbon sister, Rise Aluminum’s power comes from an EP8 RS motor, developed in an exclusive collaboration between Orbea and Shimano.Orbea acted on the motor firmware to offer the most natural and efficient assistance as possible, eliminating drag and power delay that’s typical of conventional ebikes. The motor was also optimized to provide maximum assistance between 75 and 95 strokes per minute, the cadence at which the human body pedals the most efficiently and where we normally pedal our standard mechanical bikes.This means that the harder we pedal, Rise responds instantly with more power, with a feeling of natural assistance.Another unique aspect of the RS philosophy is its autonomy. Due to the lower power consumption, the lower weight of the bike and the greater dependence on the rider’s legs, the battery in Rise lasts about 50% more compared to a standard ebike. This translates into surprising autonomy for the 360Wh battery in the carbon models and a whopping 540Wh in the aluminum models with a completely redesigned battery.Weight is another key to Rise and something Orbea invested many hours in to optimize the details of the models: frame, integrated battery, cable routing and push buttons were taken into account. Motor optimization through the Rider Synergy also allows for trail components to be mounted, which saves weight and enables the bike to handle like a mechanical trail bike.The lightest in the category, also in aluminumNatural pedaling and handling are the two aspects that differentiate Rise the most. To keep these characteristics intact in the aluminum versions, Orbea’s engineering team scrutinized all the details and invested many hours in development.The recently debuted aluminum version features a completely redesigned 540Wh battery, developed by Orbea, who rethought the distribution of the 21,700 cells, the housing arrangement, the wiring and the brackets to find a battery that is as optimized and lightweight as possible and with one of the highest energy densities on the market.For the frame, Orbea selected the best materials and applied the most advanced manufacturing processes, just as it does for its highest-level carbon frames. Thanks to the double- and triple-butted, hydroformed tubes, the team optimized the thickness and shapes of the tubes and reinforced the most delicate areas. In other words, it saves weight where you don’t need material and adjusts the stiffness in the important areas.In effort to give the highest level of attention to the new aluminum version, Orbea applied its polishing process to the frame. This technique smooths the welds at the tube joints, matching the aesthetics of a carbon frame. In fact, it’s difficult to discern the differences between an aluminum frame and carbon frame. This process also increases aluminum’s fatigue resistance in critical areas.All this design and development work has resulted in an aluminum frame weight of merely 3.4kg — just 100g more than an Occam aluminum frame and 2kg lighter than most aluminum ebikes on the market. The total weight of the new aluminum Rise is an impressive 19kg for the top-of-the-range model and 20kg for the entry-level model.
Same RS experience but in aluminumLike its carbon sister, Rise Aluminum’s power comes from an EP8 RS motor, developed in an exclusive collaboration between Orbea and Shimano.Orbea acted on the motor firmware to offer the most natural and efficient assistance as possible, eliminating drag and power delay that’s typical of conventional ebikes. The motor was also optimized to provide maximum assistance between 75 and 95 strokes per minute, the cadence at which the human body pedals the most efficiently and where we normally pedal our standard mechanical bikes.This means that the harder we pedal, Rise responds instantly with more power, with a feeling of natural assistance.Another unique aspect of the RS philosophy is its autonomy. Due to the lower power consumption, the lower weight of the bike and the greater dependence on the rider’s legs, the battery in Rise lasts about 50% more compared to a standard ebike. This translates into surprising autonomy for the 360Wh battery in the carbon models and a whopping 540Wh in the aluminum models with a completely redesigned battery.Weight is another key to Rise and something Orbea invested many hours in to optimize the details of the models: frame, integrated battery, cable routing and push buttons were taken into account. Motor optimization through the Rider Synergy also allows for trail components to be mounted, which saves weight and enables the bike to handle like a mechanical trail bike.The lightest in the category, also in aluminumNatural pedaling and handling are the two aspects that differentiate Rise the most. To keep these characteristics intact in the aluminum versions, Orbea’s engineering team scrutinized all the details and invested many hours in development.The recently debuted aluminum version features a completely redesigned 540Wh battery, developed by Orbea, who rethought the distribution of the 21,700 cells, the housing arrangement, the wiring and the brackets to find a battery that is as optimized and lightweight as possible and with one of the highest energy densities on the market.For the frame, Orbea selected the best materials and applied the most advanced manufacturing processes, just as it does for its highest-level carbon frames. Thanks to the double- and triple-butted, hydroformed tubes, the team optimized the thickness and shapes of the tubes and reinforced the most delicate areas. In other words, it saves weight where you don’t need material and adjusts the stiffness in the important areas.In effort to give the highest level of attention to the new aluminum version, Orbea applied its polishing process to the frame. This technique smooths the welds at the tube joints, matching the aesthetics of a carbon frame. In fact, it’s difficult to discern the differences between an aluminum frame and carbon frame. This process also increases aluminum’s fatigue resistance in critical areas.All this design and development work has resulted in an aluminum frame weight of merely 3.4kg — just 100g more than an Occam aluminum frame and 2kg lighter than most aluminum ebikes on the market. The total weight of the new aluminum Rise is an impressive 19kg for the top-of-the-range model and 20kg for the entry-level model.