The redesigned Longneck Lock-On v2.1 Grips bring a welcome facelift to an already iconic grip design. The design utiliizes ODI's v2.1 Single-Clamp locking system which delivers simple installation and 100% slip-free performance. The outer end of the grips have been designed to be easier on your hands with soft material around the entire end of the grip and are reinforced with harder plastic to prevent grip blowouts. The iconic rib pattern remains unchanged with soft flexible ribs providing excellent vibration dampening and easy to grip comfort - with or without gloves. ###section### Product Specs DIAMETER: 32mm LENGTH: 135mm PACK SIZE: 2 (Pair)
For those who prefer more grip to hold onto, the Rogue grip from ODI offers an excellent mix of shock absoprtion and control. Features thick raised pads for optimal shock absorption and longer grip life, a rugged surface pattern for better traction, a lock-on grip system for 100% Slip Free performance and Snap Cap end plugs. ###section### Product Specs DIAMETER: TBC LENGTH: 130mm PACK SIZE: 2 (Pair)
The grip choice of racers around the world, the Ruffian Lock-On Grip from ODI features exceptional control in a low profile grip designed specifically for racers. Features diamondised pattern for optimal traction, an ultra thin profile, a lock-on grip system for 100% Slip Free performance and Snap Cap end plugs.
The same grip as the Ruffian but with the new lock-on system. The lock-on system uses two clamps at each end of the grip eliminated throttle grip. ###section### Product Specs DIAMETER: 30mm LENGTH: 143mm PACK SIZE: 2 (Pair)
The Lezyne Strip Drive 400 unique body shape means it has a wide variety of mounting options so you can customise your light setup to fit your purposes and needs.Ultra-high output LEDs producing up to 400 lumensLightweight and waterproof designEnhanced lens with built-in side visibility and five high output LEDsRecharge time of 2 hours with maximum run time of 21.5 hoursLightweight at only 69gFeaturing their new co-moulded body, the Strip Drive is insulated and protected from the worst of the wind, rain and even the snow. Housed within the co-moulded design is the integrated USB stick which allows for cable-free charging at work or home. Its unique aero and round-bar compatible backside can mount to many odd shapes and sizes. It has an enhanced lens with built-in side visibility and five high output LEDs. Ten modes are available with the strongest being 400 lumens and the weakest being 15 lumens with battery life varying from 2:30 to 21:30 hours depending on the mode.
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
By using a combination of soft rubber with organic cotton, Brooks has produced grips which provide comfort for the hands and highly-efficient grip when you're changing direction. Also, as they are constructed around an alloy core and feature dual lockring, they're super-durable and will remain securely in place.
These grips are ergonomically shaped to fit the hand perfectly. This enables you to hold the grip less tightly, yet still have precise control. This reduces pressure points on the hands and reduces arm pump on long descents or day-long trail sessions. Inside the grip, there is a double-butted core that dampens the shock of sudden impacts and vibrations. Compatibility Available in three different size options to choose from, the Ergon grips GA3 are designed for a comfortable and dependable hold on the most demanding of terrains. The small size option is recommended for hand/glove sizes 6.5 to 8.5". The large size option is for hand/glove sizes 8.5 to 10.5". The difference in size refers to the grip width in inches, meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fitted to a smaller grip. Both the small and large grips are the same size. There is finally a third option available that includes one standard-sized left-hand grip and one shorter-sized right-hand single-twist-shift grip that's developed for Nexus/Rohloff. Tech Tip: Although your flat handlebars may be 31.8mm or 35mm at the central stem clamping area, most flat bars have a standard 22.2mm diameter at the ends of the bars. These grips, as with most grips on the market, are designed for bars with this standard 22.2mm measurement at the end of the bars.
The integrated construction eliminates any movement between the grip section and the collars, which could otherwise develop over time. Millions of randomly aligned Kevlar particles are suspended in the base material. As the grip is used, more of these particles are exposed, resisting wear whilst retaining a soft and tacky feel.
Constructed to the same standard as the brand's renowned Dual-Ply grips, these components feature a knurled grip surface, emblazoned with specially-angled 3D Yeti logos to keep you holding on with confidence and composure. These ODI Yeti grips are a product you can count on.
Effetto Mariposa Mangiacatena Chain CleanerThe Mangiacatena Chain Cleaner from Effetto Mariposa is a durable, efficient and fast acting chain cleaning device that scrubs deep into chain links. This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains.If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle.Chain Cleaning with Minimum WasteThere is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvent is wasted without getting to a deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike.Please Note: Reducing the amount of solvent used doesn't mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside.Deep Cleaning FormulaThe chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively remove dirt on each side, pushing the solvent inside the chain.Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it's perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended keeping the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. At the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa have selected Mangiacatena materials and construction for a long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistanceFor Single-Speed Transmissions and 5 to 13 Speed ShainsThe chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.Features: The best way to clean the chain with minimum consumption of degreasing liquid The lamellar elements at both ends retain dirt and liquid inside Mangiacatena, while the six rotating brushes - continuously wet with degreaser - also act mechanically on the chain It can be used both on the lower and upper part of the chain, pedaling in both directions Degreasing liquid or water can be added from above, without the need to open Mangiacatena Made of shockproof and solvent resistant plastic. It can be refurbished with the appropriate replacement brush kit It works with single-speed transmissions (maximum chain width: 9 mm) and 5 to 13 speed chains Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Birzman Zacoo CO2 Inflator&Bottle Set (Pu Grip)Fast and effective inflation does not come much more compact than with the Zacoo Co2 Inflator & Bottle Set Pu Grip from Birzman. Equipped with a Pu grip to keep your fingers from freezing, this small but powerful automatic pump-head will get you back to pressure in no time. Safe and Speedy CO2 InflationThe Zacoo Co2 Inflator & Bottle is a handy head and cover combo that is compatible with both Presta and Schrader valves to quickly help you get back on the road after flats and punctures with a simple press of the head. Coming equipped with a trio of 16g CO2 cartridges, the CNC machined pump head will attach to any threaded CO2 cartridge for ultimate versatility, regardless of how much inflation you need.The featured Pu grip also helps combat any freeze-burn on your hands and fingers, acting as a jacket for 16g-sized cartridges for safe use and protective carriage. A handy and functional addition to any kit bag, the Zacoo Co2 Inflator & Bottle Set Pu Grip is an ideal high-speed inflation aid from Birzman.Features: Material: Head: CNC Machined Aluminium; Grip: PU Compatibility: All threaded CO2 cartridges (3 x 16g CO2 cartridges included) Size: 4.4 x 3 x 1.6cm (valve head) Weight: 22g (valve head) Buy Birzman Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.