As the world's first entry-level carbon composite heat moldable road cycling shoe, the Bont Riot+ BOA Cycling Shoes combine the very best features with a jaw-dropping low-price; these are some of the most technically advanced entry-level road cycling shoes you can buy!Carbon composite sole is designed for maximum performance at a class leading weightMicrofiber upper is light and durable, while mesh inserts improve breathabilityBOA retention system and velcro strap allow for easy, consistent adjustmentFully heat moldable chassis allows you to get the perfect fitLightweight at just 560g per pairFrom the outset, Bont designed the Riot+ to be the best value road cycling shoe you can buy. The Riot+ uses a stiff carbon composite sole with a slim 4.8mm stack height to offer maximum performance. The carbon composite sole also helps to keep weight down to just 560g per pair.An entry-level set of shoes is likely to see a lot more abuse than a race day-only shoe, so Bont has utilised a light but tough anti-stretch microfiber upper that is incredibly durable and built to last. Mesh inserts help to improve breathability, so even in the height of summer, you won't struggle with hot feet.Fit on any cycle shoe is important, and Bont have equipped the Riot+ with a fully heat moldable chassis so you can ensure you have the perfect personalised fit just for you. With the fit sorted you'll want to make sure the shoes stay put and thanks to the use of a BOA retention system and velcro strap, you can be sure the Riot+ is going nowhere, even under hard, out of the saddle sprints and climbs. Light, stiff, comfortable and great value, the Bont Riot+ is perfect for riders who want the high-performance an an entry-level price.Size Chart:
As the world's first entry-level carbon composite heat moldable road cycling shoe, the Bont Riot+ BOA Cycling Shoes combine the very best features with a jaw-dropping low-price; these are some of the most technically advanced entry-level road cycling shoes you can buy!Carbon composite sole is designed for maximum performance at a class leading weightMicrofiber upper is light and durable, while mesh inserts improve breathabilityBOA retention system and velcro strap allow for easy, consistent adjustmentFully heat moldable chassis allows you to get the perfect fitLightweight at just 560g per pairFrom the outset, Bont designed the Riot+ to be the best value road cycling shoe you can buy. The Riot+ uses a stiff carbon composite sole with a slim 4.8mm stack height to offer maximum performance. The carbon composite sole also helps to keep weight down to just 560g per pair.An entry-level set of shoes is likely to see a lot more abuse than a race day-only shoe, so Bont has utilised a light but tough anti-stretch microfiber upper that is incredibly durable and built to last. Mesh inserts help to improve breathability, so even in the height of summer, you won't struggle with hot feet.Fit on any cycle shoe is important, and Bont have equipped the Riot+ with a fully heat moldable chassis so you can ensure you have the perfect personalised fit just for you. With the fit sorted you'll want to make sure the shoes stay put and thanks to the use of a BOA retention system and velcro strap, you can be sure the Riot+ is going nowhere, even under hard, out of the saddle sprints and climbs. Light, stiff, comfortable and great value, the Bont Riot+ is perfect for riders who want the high-performance an an entry-level price.Size Chart:
Bont Riot MTB+, the worlds first carbon composite heat moldable entry level MTB shoe, now available with BOA retention system. The Riot MTB+ combines Bont's pro series technical features including our power transfer platform for greater efficiency, replaceable sole guards, unique anatomical shaping with competition grade materials and BOA retention system to create the most technically advanced entry level MTB shoe. Model: Riot MTB+ Material: Carbon composite construction with microfiber upper Stack Height: 4.8 mm Air Vents: Ventilations holes through upper and mesh inserts Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: MM grid plus grip / SPD compatible Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: Z form velcro strap and Boa dial system Weight: 385 grams
Bont Riot TR+, the worlds only carbon composite heat moldable entry level triathlon shoe. The Riot TR+ combines Bont's pro series technical features including our power transfer platform and anatomical shaping with competition grade materials to create the most technically advanced entry level triathlon shoe. Microfiber Upper Microfiber upper is used to provide the Bont Riot TR+ with a strong outer layer to withstand the rigours of everyday cycling whilst mesh inserts assist with the breathability of the cycling shoes. Carbon Composite Construction The carbon composite construction of the Riot TR+ has been Heat Moulding specifically designed to ensure maximum performance at low weight. The fibreglass tub style construction of the chassis has been strengthened with the inclusion of carbon across high stress areas. The carbon has been sandwiched between layers of the fibreglass to maximise strength. Retention System Independent double velcro closure system to allow for maximum adjustability. The main strap has been designed to allow it to be maintained in a fully opened state to assist in quick transition times. TPU Toe Protector The toe protector can protects the front area of the shoe from wheel rub and impact. Ventilation The Bont Riot TR+ is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Carbon Fiber Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of the Riot TR+ is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear. The Riot TR+ utilizes unidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strength characteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weave fibers, it also assists in the weight reduction of the cycling shoes. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Forefoot Shape Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toes along with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which often results in the common hot foot sensation. Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correct position. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling force to be spread across the greatest possible surface area. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: Riot TR+ Material: Carbon Composite Construction with Microfiber Upper Stack Height: 4.8 mm Air Vents: Ventilations holes through mesh inserts Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: Independent Double Velcro Closure Weight: 230 grams Color Options: Pearl White/Black, Totally Lime/Charcoal, Midnight/Mega Crimson, Matte Black/Charcoal Sizing Options: Standard
Bont Riot MTB+, the worlds first carbon composite heat moldable entry level MTB shoe, now available with BOA retention system. The Riot MTB+ combines Bont's pro series technical features including our power transfer platform for greater efficiency, replaceable sole guards, unique anatomical shaping with competition grade materials and BOA retention system to create the most technically advanced entry level MTB shoe. Model: Riot MTB+ Material: Carbon composite construction with microfiber upper Stack Height: 4.8 mm Air Vents: Ventilations holes through upper and mesh inserts Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: MM grid plus grip / SPD compatible Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options: Z form velcro strap and Boa dial system Weight: 385 grams
Bont Riot+ , the worlds first carbon composite heat moldable entry level cycling shoe now available with BOA retention system. The Riot+ combines Bont's pro series technical features, our power transfer platform, anatomical shaping with competition grade materials and BOA retention system to create the most technically advanced entry level road cycling shoe. Microfiber Upper Is Utilized Microfiber upper is used to provide the Bont Riot+ with a strong outer layer to withstand the rigours of everyday cycling whilst extensive perforations across the upper ensure excellent ventilation of the cycling shoes. Carbon Composite Construction The carbon composite construction of the Riot+ has been specifically designed to ensure maximum performance at low weight. The composite tub style construction of the chassis has been strengthened with the inclusion of carbon across high stress areas. The carbon has been sandwiched between layers of fibreglass to maximise strength. Retention System Z form velcro and micro adjustable BOA retention system are utilized in conjunction with Bont's anatomical design to ensure a secure fit. Ventilation The Bont Riot+ is highly ventilated via extensive perforations of the top panel. Anti Stretch Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe from stretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to the outer leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoes structure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the foot in the upward part of the pedal stroke. Last Design A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, they only make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanics and ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process is ongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoe brand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional and correct anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit is simple, We make shoes for cycling, not walking. Medial Longitudinal Arch Support Structural medial longitudinal arch support is provided in all models to stop over pronation of feet. Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due to internal rotation of tibia and femur. This can result in knee injuries. In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain. Anatomical Heel Cup The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage of pedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening of straps/laces allowing for increased comfort and blood circulation. Lateral Forefoot Support Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associated with over pronation and supination. These issues often result in incorrect tracking of knees causing injuries along with hip and lower back pain. Specifications: Model: ?Riot+ Material: Carbon Composite Construction with Microfiber Upper Stack Height: 4.8 mm Air Vents: Ventilations holes through upper and mesh inserts Innersole: Comfort Sole Guards: Replaceable Cleat Mounting: 3 Hole Look Configuration Closing Options: Boa dial and Z from velcro strap Weight: 280 grams