The ABEC3 6901 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
Enduro Bearings ABEC3 6901 LLB BearingThis superb bearing sets the benchmark for military standard, high precision bearings. Some of the finest cycling component come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade.Features: Material: Steel Bearing Code: 6901 Dimensions: 12x24x6mm ABEC: 3 Grade: 10 Seals: LLB Grease: Mobile HP 222 Application: Hubs, bottom bracketsWeight: 10.41g (approx)Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Specially developed to fit Blank Compound hubs on Blank Compound wheelsets, this kit contains three pawls and one spring.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features:Bearing Code: 6903,Dimensions: 17 x 30 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 17.13g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Bearing Code: MR 18307,Dimensions: 18 x 30 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 15.10g.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Bearing Code: 608,Dimensions: 8 x 22 x 7mm,ABEC: 5,Grade: 5,Seals: SRS,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 11.16g.
Enduro Bearings ABEC3 688 LLU Max BearingOffering a dependable and long-lasting performance when working with your frame pivots, this hard-wearing bearing features military-grade, high-precision materials to ensure you run smoothly. Made without retainers and equipped with 40% more balls than standard ABEC 3 or 5 bearings, it can carry a much higher load. Full of CRC Marine Grease, which will not wash out or break down when wet, they stay lubricated and out-last commonly found bearings. Features: Dimensions: 8x16x5mm ABEC: 3 Grade: 10 Seals: LLU Grease: CRC Marine Application: Frame Pivots Weight: 3.9g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Key Features: Bearing Code: 686, Dimensions: 6mm x 13mm x 5mm, ABEC: 5, Grade: 5, Seals: LLU, Grease: Kyodo Yushi PS-2, Application: Hubs, Bottom Brackets, Weight: 11.2g.
Blank Compound Rear Hub Springs and Pawls KitSpecially developed to fit Blank Compound hubs on Blank Compound wheelsets, this kit contains three pawls and one spring. Genuine Blank spare parts.Features: Official Blank Spare partsCompatibility: Blank Compound hubsIncludes: 3 pawls and 1 springBuy Blank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 608,Dimensions: 8mm x 22mm x 7mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 11.55g.
Enduro Bearings ABEC3 6900 LLB BearingThis bearing raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade.Features: Material: Steel Bearing Code: 6900 Dimensions: 10x22x6mm ABEC: 3 Grade: 10 Seals: LLB Grease: Mobile HP 222 Application: Hubs, bottom bracketsWeight: 9.38g (approx)Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 699,Dimensions: 9 x 20 x 6mm,ABEC: 5 ,Grade: 5,Seals: LLB,Grease: CRC Marine,Application: Frame Pivots,Weight: 7.10g.