This cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsAlways use a quick release skewer to hold the tool in place and snug to cogs when loosening; For solid axles, use the axle nutThis has been constructed with heat treated alloy steel with a one-inch base that will fit a wrench or a vice. The thin wall construction will allow you to use this without removing the cones and locknuts for extra convenience. It will also fit some disc brake lockrings giving this a tool multipurpose use.
The O-Ring Pick set from Birzman is designed to make the removal and placement of these often-fiddly components a whole lot easier.Hooked and L-shaped endsN and spoon shaped endsMaterial: Hardened Steel / High polymerThis dual tool set features two implements with different shaped ends, capable of placing and lifting the most awkward of O-rings when you are repairing your bike chain. Each tool has one hooked end, with an L-shaped opposite end on one and an N-shaped end on the other. Precise tools for a tricky job, the O-Ring Pick set makes this part of chain maintenance as quick and hassle-free as can be.
Features Ø12mm center pin for thru axel hubs.Compatible with Shimano® HG™ & SRAM® Cassettes, Shimano® Center Lock, or other similar 12-spline Ø23.4mm lockrings. Specification: Functions: 1/2".,Material: Alloy steel (socket) / Aluminium (center pin). .
Cassette Lockring Remover, removes Shimano Hyperglide, Sram or Sunrace cassette lockrings. Use with 24mm spanner, Includes centre pin which will hold the cassette if used in a vice.
Aluminium lockring for Hope cassettes.
The O-Ring Pick set from Birzman is designed to make the removal and placement of these often fiddly components a whole lot easier.This dual-tool set features two implements with different shaped ends, capable of placing and lifting the most awkward of O-rings when you are repairing your bike chain. Each tool has one hooked end, with an L-shaped opposite end on one and an N-shaped end on the other.Precise tools for a tricky job, the O-Ring Pick set makes this part of chain maintenance as quick and hassle-free as can be.Specification:Material: Hardened Steel / High polymer..
This updated cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs. It now also fits the SRAM XX1 11-speed cassettes.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsGuide pin helps to hold the cassette tool in placeThis has been constructed with heat treated alloy steel with a one-inch base that will fit a wrench or a vice. The thin wall construction will allow you to use this without removing the cones and locknuts for extra convenience. It will also fit some disc brake lockrings giving this a tool multipurpose use.
Schwalbe Silento Touring TyreMuch more than just a basic quality. The foundation of all Active Line tires is a high-quality 50 EPI carcass.Coarsely woven 20 or 24 EPI carcasses can no longer be found in Schwalbe’s range. The much more densely woven 50 EPI carcass is far more puncture resistant and robust. At the same time the fabric needs less rubber coating and thus has a reduced weight. Naturally every Active Line tire has a puncture protection belt, a balanced rubber compound, plus a functional and attractive tread design. Simply said: Active Line is reliable, brand quality!Specifications: Version: Puncture Protection Compound: SBC Colourway: Reflex Size: 26” x 1.75” Bar: 2,5-4,5 PSI: 35-65 EPI: 50 Load: 100kg Weight: 625gBuy Schwalbe Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ABEC3 6804 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
Coarsely woven 20 or 24 EPI carcasses can no longer be found in Schwalbe's range. The much more densely woven 50 EPI carcass is far more puncture resistant and robust. At the same time, the fabric needs less rubber coating and thus has a reduced weight. Naturally, every Active Line tire has a puncture protection belt, a balanced rubber compound, plus a functional and attractive tread design. Simply said: Active Line is reliable, brand quality!
Enduro Bearings ABEC3 6804 LLU Max Bearing Optimised for use with cycling components, this MAX model has been built without retainers and contains 40% more balls than standard ABEC 3 or 5 bearings, enabling them to bear a far heavier load. Filled with CRC Marine Grease, a water-resistant and long-lasting performance is assured, especially when used with your frame pivots. Features: Dimensions: 20x32x7mm ABEC: 3 Grade: 10 Seals: LLU Grease: CRC-Marine Application: Frame Pivots Weight: 18.45g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.