Fox Suspension SLS MTB Rear Shock Spring (2.4" Travel)Featuring a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 2.4" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-007 Orange 475lb 033-22-008 Orange 500lb 033-22-009 Orange 550lb 033-22-010 Orange 600lb 033-22-002 Orange 350lb 033-22-003 Orange 375lb 033-22-004 Orange 400lb 033-22-005 Orange 425lb 033-22-006 Orange 450lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension SLS MTB Rear Shock Spring (2.4" Travel)Featuring a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 2.4" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-007 Orange 475lb 033-22-008 Orange 500lb 033-22-009 Orange 550lb 033-22-010 Orange 600lb 033-22-002 Orange 350lb 033-22-003 Orange 375lb 033-22-004 Orange 400lb 033-22-005 Orange 425lb 033-22-006 Orange 450lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
PressFit 30 Threaded ABEC-3 bottom bracket - Black,The two machined aluminium cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance,Serviceable, double lip sealed Enduro bearings,USA machined aluminium shell for superior function and durability,No more creaking, smoother operation, longer bearing life, and really quick bearing replacement,Directly replaces all OEM PF30 bottom brackets,Black anodized.
Thread together bottom bracket for frames using the PF30 bottom bracket standard. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in PF30 (46mm ID BB shell) frames without the need for any adapters.
Featuring serviceable, double lip sealed, high precision Grade 5, SI3N4 pure ceramic Enduro bearings, This bottom bracket is made with a USA machined aluminium shell for superior function and durability. Fits race frames with a BB86 Bottom bracket shell and cranks with a 24mm spindle. Requires regular servicing.
The LifeLine Pro Bearing Press Set is specifically designed for all common bearing sizes used on bikes. It comes with the gauges and adaptors needed and comes in a handy case that keeps everything neat and organised.The kit is supplied with pairs of gauges to work with the following bearing sizes:R6/6801/6900608/6802/69016800/6803/69021728/6804/69031526/6805/60002437/6806/6001In addition to the gauges above, this set is supplied with adaptors for installation of hub bearings where it is necessary to have the axle in place to install the last bearing. The additional adaptors/spacers are used to put over the axle, allowing you to safely press the bearing in by pressing against the hub shell without interference from the axle.OD-24mm adapter for 6802(15x24) and 6901(12x24)OD-26mm adapter for 6000(10x26), 6803(17x26) and 15267(15x26)OD-28mm adapter for 6001(12x28), 6902(15x28) and 17287(17x28)OD-30mm adapter for 6903(17x30)Additional spacers / Short x2 + Long x1
SRAM X-Glide 11 Speed Outer Chain RingThe X-Glide 11-Speed outer chainring has been specially designed for optimised shifting performance with the YAW front derailleur. Thanks to its CNC-machined 7075-T6 aluminium construction, precisely tuned tooth shape and shifting ramps, it ensures accurate and consistent shifting as you're spinning up to speed. Features: Material: 7075-T6 Aluminum, CNC-machined Bottom Bracket Compatibility: GXP or BB30 Speed: 11-Speed BCD: 110mmBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Red X-Glide Road ChainringWhen you’re racing or taking on long-distance rides, you need your gears to be operating as smoothly as possible to maximise your power transfer. A genuine SRAM part, the Red X-Glide Road Chainring will breathe new life into your chainset and make the most of every watt of your output. Constructed using stiff and hard-wearing 7075-T6 Aluminium and designed for use within SRAM Red 22 (2x11-Speed) systems, it's ready for endurance rides and aggressive riding.Features:Material: 7075-T6 AluminiumUse: RoadSpeed: 11-SpeedBolt Circle Diameter (BCD): 52T: 5x110mm; 53T: 5x130mmDrivetrain Compatibility: SRAM Red 22 (2x11-Speed)YAW CompatibleHidden Bolt SystemSold individuallyManufacturer's Part Numbers: 110mm BCD: CR-XGLD-110-A1; 130mm BCD: CR-XGLD-130-A1Weight: 255g (53T 130mm BCD)Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Starting out with raw 7075-T6 alloy plate, we stamp, coin, and CNC the rings to create a precise shifting whole. Coining shapes tooth profiles into designs CNC alone can't match, creating a stronger tooth by strain-hardening the alloy for superior durability. Stainless steel pickup pins give shifting longevity. Chainring-specific finishing technologies and laser graphics add durability and appeal.Low weight and excellent strength,Made of 7075-T6 aluminium,PowerGlide ramps/pins for optimized shifting performance,Black hard anodized finish,110 mm bolt circle diameter.
Starting out with raw 7075-T6 alloy plate, we stamp, coin, and CNC the rings to create a precise shifting whole. Coining shapes tooth profiles into designs CNC alone can't match, creating a stronger tooth by strain-hardening the alloy for superior durability.Key Features:Stainless steel pickup pins give shifting longevity..Chainring-specific finishing technologies.Laser graphics add durability and appeal.
Starting out with raw 7075-T6 alloy plate, we stamp, coin, and CNC the rings to create a precise shifting whole. Coining shapes tooth profiles into designs CNC alone can't match, creating a stronger tooth by strain-hardening the alloy for superior durability. Stainless steel pickup pins give shifting longevity. Chainring-specific finishing technologies and laser graphics add durability and appeal.Low weight and excellent strength,Made of 7075-T6 aluminium,PowerGlide ramps/pins for optimized shifting performance,Black hard anodized finish,110 mm bolt circle diameter.
These Praxis compact 110BCD Road Chainring Sets are engineered for the highest performance shifts in all conditions.LevaTime® performance and our proprietary forging process give the fastest shifts and longest lifetime of any Chainring on the planet.PLEASE NOTE: Chainring bolts are not included. EXCEPT with the 48/32 where custom ring bolts required for installation are included.Image for illustration purposes only