Park Tool Campag Crank & Bearing Tool Set (CBP-8)The Campag Crank & Bearing Tool Set CBP-8 features everything you need to safely and efficiently remove and install on Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems. Safe Removal and Installation of Cranks and Bottom BracketsThe CBP-8 includes a crank puller for aluminium and carbon fibre Power Torque systems, a bearing puller for Power Torque and Ultra Torque systems and a bearing setter for both systems, making the job of replacing your cranks and BBs less labour intensive. Also included in the set are: Removal adaptor for Power Torque crank bearings Removal protection pads for use with carbon cranks Removal protection adaptor for use with aluminium crank arms Crank removal extension plug for Power Torque Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
Heat treated alloy tool steel, one inch base fits wrench or bench vise. The FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.Cassette Lockring Tool with 12mm Guide Pin:Utilizes a 12mm guide pin to stabilize the tool in use,Fits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and others (23.5mm diameter),Fits some Shimano® and similar disc brake rotor lockring,.Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across.Cassette Lockring Tool with 5mm Guide Pin:Fits Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and other cassette lockrings,Also fits some Shimano® disc brake lockrings,Guide pin stabilizes tool.
Park Tool Cassette Lockring Tool FR-5.2Enjoy quick and simple removal and installation of cassette lockrings with this handy tool from Park Tool. Designed to be hassle-free, this lockring tool is suitable for use with a variety of cassette lockrings, making it a versatile essential for any cycle workshop.Easy and Efficient Lockring RemovalDurably built from heat-treated alloy tool steel, for daily garage and workshop use, the Park Tool Cassette Lockring Tool FR-5.2 has a thin wall construction, with 12 splines for accurate engagement with similarly splined lockrings. Specially designed to make the job easy, there is no need to remove cones and locknuts when using this fantastic bit of kit.Sized perfectly to be used with a lockring wrench or bench vice for extra leverage, the tool is compatible with a range of cassette lockrings including Shimano, SRAM, and Chris King, and some Shimano disc brake lockrings. With the Park Tool Cassette Lockring Tool FR-5.2 in your toolbox, you will never be short of work. Features: Material: Heat Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King, and other cassette lockrings + some Shimano disc brake lockrings Size: 1" base with 12 splines (approximately 23.4mm across), 12mm centre bore for axle clearance Note for Usage: Hold the tool in place with a quick-release skewer and have it snug to cogs when loosening. Use the axle nut for solid axles.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Part of a comprehensive range of freewheel and bottom bracket removal tools, the Park Tool cassette lockring tool has a one-inch base that easily fits a wrench or a bench vice. Thin Oversized centre hole and thin wall design allows use without removal of cones and locknuts Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation.
Made from a heat-treated alloy, the Park Tool cassette tool FR-5.2 allows for the removal of cones and locknuts. It has 12 splines that are approximately 23.4mm across, the one-inch base allows it to be used with a wench or a bench vice. Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation. The Park Tool FR-5.2 is designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings. It can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Thin wall construction allows use without the removal of cones and locknuts.
Park Tool Cassette Lockring Tool FR-5.2GReplace and install your Shimano and SRAM lockrings with ease thanks to this Cassette Lockring Tool from Park Tool.Versatile and Easy Lockring RemovalDesigned to help remove most common 12-spline cassette lockrings, this handy device will work with hollow quick-release axles, using its 5mm guide pin to stabilise the tool while in use. The FR-5.2G ensures proper fit and solid engagement with any lockring, while its thin-wall construction allows you to remove them without having to take out any cones or locknuts from the hubs. A great effort-saving addition to any toolbox, the Cassette Lockring Tool FR-5.2G will get your cassettes off and on in no time.Features: Material: Heat-Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x) SunRace, SunTour, Chris King, some Shimano disc brake lockrings and other 12-spline lockringsSize: 1" base, 12 splines approximately 23.4mm acrossBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
A great effort-saving addition to any toolbox, the Park Tool cassette tool FR-5.2G will get your cassettes off and on in no time. It ensures proper fit and solid engagement with any lockring, while its thin-wall construction allows you to remove them without having to take out any cones or locknuts from the hubs. Designed to help remove the most common 12-spline cassette lockrings, the handy Park Tool FR 5.2g will work with hollow quick-release axles, using its 5mm guide pin to stabilize the tool while in use.
Park Tool Cassette Lockring Tool FR-5.2GTThis Cassette Lockring Tool from Park Tool has been designed to easily remove and install lockrings on hubs. Suitable to be used with a variety of cassettes and disc brakes, this versatile tool is ready for the task. Shimano, SRAM and SunRace CompatibleStabilised by a strong 12mm guide pin, the tool fits 12mm thru-axles and ensures a proper and true fit. The depth of the 12-splines on the tool also allows for solid engagement in any compatible lockring. Suitable for use with 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others (23.5mm diameter), as well as other Shimano and similar disc brake rotor lockrings, the Cassette Lockring Tool FR-5.2GT is a must for any mechanic's workshop.Features: Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) + Shimano and similar disc brake rotor lockrings Hex-shaped base of tool fits 1" (25.4 mm) socket or wrenchGuide Pin Size: 12 mm Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stabilized by a strong 12mm guide pin, the high-quality Park Tool FR-5.2GT cassette tool fits 12mm thru axles and ensures a precise and true fit. The depth of the 12-splines on the tool also allows for solid engagement in any compatible lockring. Suitable for use with 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others (23.5mm diameter), as well as other Shimano and similar disc brake rotor lockrings, the Park Tool FR 5.2GT is the perfect choice for your workshop.
Park Tool Centering Gauge 1554-1As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features:The 1554-1 represents a dished rear wheel to assist in centering the TS-2 truing stand The 1554-1 will help align the TS-2 stand, but for accurate work with the TS-2, working with a dishing tool such as the WAG-4 or WAG-5 is recommendedBuy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.