Park Tool Cassette Lockring Tool FR-5.2Enjoy quick and simple removal and installation of cassette lockrings with this handy tool from Park Tool. Designed to be hassle-free, this lockring tool is suitable for use with a variety of cassette lockrings, making it a versatile essential for any cycle workshop.Easy and Efficient Lockring RemovalDurably built from heat-treated alloy tool steel, for daily garage and workshop use, the Park Tool Cassette Lockring Tool FR-5.2 has a thin wall construction, with 12 splines for accurate engagement with similarly splined lockrings. Specially designed to make the job easy, there is no need to remove cones and locknuts when using this fantastic bit of kit.Sized perfectly to be used with a lockring wrench or bench vice for extra leverage, the tool is compatible with a range of cassette lockrings including Shimano, SRAM, and Chris King, and some Shimano disc brake lockrings. With the Park Tool Cassette Lockring Tool FR-5.2 in your toolbox, you will never be short of work. Features: Material: Heat Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King, and other cassette lockrings + some Shimano disc brake lockrings Size: 1" base with 12 splines (approximately 23.4mm across), 12mm centre bore for axle clearance Note for Usage: Hold the tool in place with a quick-release skewer and have it snug to cogs when loosening. Use the axle nut for solid axles.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Spoke, Bearing and Cotter Gauge SBC-1This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale.For crank cotters and ball bearings it works just like a gauge for drill bits. Spoke lengths are in both metric and fractional markings. Made of anodized aluminum with embossed markings to allow easy reading and long life.Buy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Chainring Nut Wrench (CNW-2)Install and remove chainrings with ease thanks to the Chainring Nut Wrench from Park Tool. Benefiting from a double-ended design to fit most slotted-type nuts, its design prevents spinning when tightening. The ideal tool for your cycle workshop. Features:The outer width of both ends of the CNW-2 are nominally 12mm wideOne end has a two outer tips nominally 2.7mm wide each, and the other end has tips of 3.8mm eachCompatibility: Double-ended to fit most slotted-type nutsBlade Thickness: 1.35mmNote: The CNW-2 replaces the CNW-1Weight: 19.6gBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Press Fit BB Bearing Tool Set (BBT-90.3)Park Tool has established itself as the go-to brand for professional bike mechanics, and its BBT-90.3 bottom bracket fitting set is the ideal addition to any home or workshop toolbox. Compatible with a wide range of press-fit types, it’s designed to combine with Park Tool’s bearing press tool, to accurately insert or extract the bearing cups into the bike frames bottom bracket shell.Features: Compatibility: BB90, BB92, Shimano press-fit, SRAM press-fit GXP, Race Face press-fit and other press-fit bottom bracket systems Can be used with a Park Tool Bearing Press to press the bearings into the bottom bracket shellBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Home Mechanic Bearing Cup Press (HHP-3)Tough, durable and simple to use, the HHP-3 Bearing Cup Press can be used to install bike headset cups and press-fit bottom brackets. Park Tool has made it to be compatible with a wide range of sizes, making it the perfect addition to any amateur home mechanic's or busy shop mechanic's toolbox. As a manufacturer of bicycle specific tools since 1963, you can safely rely on Park Tools' many years of experience. The World's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the World.Features: Simple and economical, the HHP-3 is designed to install all sizes of head cups (1" to 1-1/2") and one-piece bottom bracket cupsWill also press BB30 and BB90 (BB86, or BB92) system cupsThe thread of the HHP-3 is 5/8" (16mm) diameter and will work to press BMX bottom brackets HHP-3 has a maximum working length of 385mm Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Made from a heat-treated alloy, the Park Tool cassette tool FR-5.2 allows for the removal of cones and locknuts. It has 12 splines that are approximately 23.4mm across, the one-inch base allows it to be used with a wench or a bench vice. Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation. The Park Tool FR-5.2 is designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings. It can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Thin wall construction allows use without the removal of cones and locknuts.
A great effort-saving addition to any toolbox, the Park Tool cassette tool FR-5.2G will get your cassettes off and on in no time. It ensures proper fit and solid engagement with any lockring, while its thin-wall construction allows you to remove them without having to take out any cones or locknuts from the hubs. Designed to help remove the most common 12-spline cassette lockrings, the handy Park Tool FR 5.2g will work with hollow quick-release axles, using its 5mm guide pin to stabilize the tool while in use.
Stabilized by a strong 12mm guide pin, the high-quality Park Tool FR-5.2GT cassette tool fits 12mm thru axles and ensures a precise and true fit. The depth of the 12-splines on the tool also allows for solid engagement in any compatible lockring. Suitable for use with 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others (23.5mm diameter), as well as other Shimano and similar disc brake rotor lockrings, the Park Tool FR 5.2GT is the perfect choice for your workshop.
To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings, it works just like a gauge for drill bits.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.