The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Right Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
The Halo MXR rear hub is the hub used in the Matt Priest pro wheels which uses a 120 point triple wedge pawl drive Supa Drive system and features a 14mm hollow Cr-Mo axle and bushed bearing mini threaded 9t driver. This hub almost instantaneous pick up and a fantastic sound ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:383g / 13.5oz
Affordable but very well spec'd rear cassette wheel from Jet BMX. This Wheel uses a fully sealed 9t Cassette hub with a solid 14mm male axle laced onto a single wall 6061 aluminium rim with black spokes. RHD Only An Ideal wheel to upgrade or replace your current complete bike wheel ###section### Product Specs WHEEL SIZE:20" HUB:Fully Sealed 9t Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Right Hand Side RIM:6061 Alloy Single Wall SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:TBC
Standard 9t Driver, 36 Hole option with a 14mm Hollow Male Axle. LHD or RHD options available. Hand Made by Profile Racing in the USA. The Gulf Coaster has the same design and internals as the Profile Zcoaster hub. The hub can be used as either a Freecoaster or regular cassette hub by simply switching the Slack-Cam ring inside the hub. The Shell is machined from 6061 aluminium and features a hollow 14mm Crmo Axle. The driver is also supported from the outside by a huge bearing making this hub ultra reliable and maintenance free ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:14mm Male DRIVER:9t SPOKE HOLES:36h WEIGHT:583g / 20.55oz
Female axle version - Available with a huge choice of 14mm female bolts or 10mm bolts with drivers from 9t through to 18t! - Select your drive side and Colour and then select your driver option and bolts at the Checkout!. Titanium Upgrades also available. Hand Made in the USA by Profile Racing, The V2 Madera cassette hub uses the same internals as the classic Profile mini casstte hub which set the benchmark for Cassette hubs and was the first BMX Cassette hub. Refined over the years the hub features a heat treated 6061 aluminium Shell which houses a heat treated Aluminium internal axle and precision sealed bearings. The hub uses the bullet proof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. Available in 3 colours, Black, Nickel & Snow. ###section### Product Specs HUB TYPE:Cassette AXLE:Female Bolts DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:372g / 13.01oz
Male axle version - Sold standard with a 14mm Hollow Male Axle (You can Upgrade to Titanium at Checkout) Drivers from 9t through to 18t! - Select your drive side and Colour and then select your driver option at checkout. Titanium Upgrades also available. Hand Made in the USA by Profile Racing, The V2 Madera cassette hub uses the same internals as the classic Profile mini casstte hub which set the benchmark for Cassette hubs and was the first BMX Cassette hub. Refined over the years the hub features a heat treated Crmo 14mm hollow axle with 17mm nuts (You can upgrade to a titanium Axle at checkout). The hub uses the bullet proof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. Available in 3 colours, Black, Nickel & Snow. ###section### Product Specs HUB TYPE:Cassette AXLE:Female Bolts DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:501g / 17.65oz
The Mankind Control cassette rear wheel is their low priced, but nevertheless great spec'd rear wheel, which features the fully sealed Mankind Control cassette hub with 9t driver and a pinned double wall rim. Completed with Straight Spokes, Brass Nipples and the Mankind Vision Rim Band. ###section### Product Specs WHEEL SIZE: 20" HUB: Mankind Control cassette AXLE: Male DRIVE SIDE: Right Side Drive RIM: Pinned double wall SPOKES: TBC NIPPLES: Brass WEIGHT: 1090 Grams (38.45oz)
The Mankind Vision Cassette Rear Hub is fully sealed with a 6061-T6 aluminum body, 14mm nickel chromoly hollow axle with 8mm inner hex and a 1-piece 9t chromoly driver. Plastic hub guards included. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm nickel chromoly hollow axle DRIVER:9t SPOKE HOLES:36h WEIGHT:469 Grams (16.54oz)
The Mankind Vision Cassette Rear Wheel features the Mankind Vision 36H 9t cassette hub with Plastic rear hub guards included and the Mankind Vision welded double wall rim. Completed with Mankind Vision Straight Spokes, Brass Nipples and the Mankind Vision Rim Band. ###section### Product Specs WHEEL SIZE:20" HUB:Mankind Vision Cassette AXLE:14mm DRIVE SIDE:Right Side Drive RIM:Mankind Vision SPOKES:Mankind Vision Straight Spokes NIPPLES:Brass WEIGHT:1090 Grams (38.45oz)
The Mankind Vision Freecoaster Rear Hub is fully sealed with a 6061 aluminum hub shell, 14mm heat-treated chromoly axle with 6mm internal hex and a 1-piece 9t chromoly driver. Plastic hub guards included. ###section### Product Specs HUB TYPE:Freecoaster AXLE:14mm heat-treated chromoly axle DRIVER:9t SPOKE HOLES:36h WEIGHT:651 g
The Mankind Vision Freecoaster Rear Wheel features the Mankind Vision 36H 9t Freecoaster hub with Plastic rear hub guards included and the Mankind Vision welded double wall rim. Completed with Mankind Vision Straight Spokes, Brass Nipples and the Mankind Vision Rim Band. ###section### Product Specs WHEEL SIZE:20" HUB:Mankind Vision Freecoaster AXLE:14mm DRIVE SIDE:Right Side Drive RIM:Mankind Vision SPOKES:Mankind Vision Straight Spokes NIPPLES:Brass WEIGHT:1090 Grams (38.45oz)
The Merritt Battle Freecoaster uses a traditional clutch style system paired with the 9T Diamond Driver (the driver comes with a lifetime guarantee). The driver replaces the small bearings, the most common source of failure in freecoasters, with polymer bushings along its entire length. The hub shell is super slim and CNC’d 6061 aluminum with a hollow chromoly axle. The hub comes set with maximum slack (we recommend running it like this) but adjustment washers are included to reduce slack if desired. The Battle Freecoaster is laced to The Battle Rim, The Battle Rim steps away from the low profile trend we’ve been seeing in BMX with some taller sidewalls to give the rim a little more beef. The Battle rim is made from 6061-aluminum with a 39mm width and a welded seam to ensure strength. It’s a double wall rim and it has a beefy ridge in the middle to help prevent spokes from blowing out. Available in RHD and LHD. ###section### Product Specs WHEEL SIZE:20" HUB:Merritt Battle Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Merrit Battle Rim SPOKES:Butted NIPPLES:Brass WEIGHT:1090g / 38.4oz E3