The Javelin cassette features a CNC machined 7075 aluminium shell, a 1 piece 9T driver with Polymer Bushings and a heat treated Crmo 14mm hollow axle with colour matched wheel nuts. The Javelin is laced to the 7005 aluminum Animal RS rim with welded seam, sidewalls have a short vertical section enough for a braking surface, then an angled portion, spoke holes are also drilled for traditional lacing. ###section### Product Specs WHEEL SIZE:20" HUB:20" AXLE:Crmo female DRIVE SIDE:Right Side Drive RIM:Animal RS SPOKES:14 Gauge NIPPLES:TBC WEIGHT:TBC
Complete Freecoaster Wheel from Wethepeople. Assembled using the Helix freecoaster hub and the Wtp Logic rim. Rear wheel uses the straight-walled rim for use with brakes ###section### Product Specs WHEEL SIZE:20" HUB:WTP Helix Coaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:WTP Logic SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:TBC
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Right Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
Featuring fully sealed front 3/8″ hub and 14mm rear freecoaster laced to light and strong Fit double wall OEM rims. ###section### Product Specs WHEEL SIZE: 20" HUB: Fit freecoaster AXLE: 3/8″ front hub and 14mm rear DRIVE SIDE: Right Side Drive RIM: Fit double wall OEM SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
Imagine a freecoaster hub that feels like a cassette hub, weighs the same as a cassette hub, has a pedal gap like a cassette hub and sounds like a cassette hub. Sounds like a dream huh? Well now it’s a reality. Introducing the BSD Revolution Hub. It’s been tested rigorously over the last two years and BSD are excited to offer it to you now. Utilizing the Planetary clutch system that functions in a unique and revolutionary way, the BSD Revolution hub eliminates many of the problems associated with the heavyweight traditional cone style clutch design. 30% lighter than conventional freecoaster hubs and no gap when pedalling forward. Eradicates unwanted engagement on rollbacks and feels and sounds like a cassette hub. No need for oversized hub bearings due to low axial load an has a supertough hollow male 14mm chromo axle. The Rvolution is laced to BSD's NASA rim. The NASA rim is designed to be stiff both laterally and radially. Based on an I-beam design with extra thick tapered sidewalls, tapered spoke seats, cross over lacing and a curved inner strut. BSD hubguards included. ###section### Product Specs WHEEL SIZE:20" HUB:BSD Revolution AXLE:14mm DRIVE SIDE:Right Side Drive RIM:BSD NASA SPOKES:14 Gauge NIPPLES:TBC WEIGHT:TBC
The Balance cassette hub features precision sealed bearing and comes with dual built in Primo nylon guards and is laced to the VSXL+ rim. Made from 6061-T6 aluminum the VSXL+ rim features a cross lace design for added strength and stiffness. At 38mm wide the VSXL+ rim is over 12% wider than the VS helping it maintain the correct profile of modern tyre sizes. ###section### Product Specs WHEEL SIZE:20" HUB:Primo Balance Cassette AXLE:14mm Male DRIVE SIDE:Right Side Drive RIM:Primo VSXL+ SPOKES:36 NIPPLES:TBC WEIGHT:TBC
The Shadow Conspiracy Definitive Cassette Hubis the most advanced hub that Shadow has produced to date. With 120 points of engagement, the Definitive Cassette features a 3 pawl engagement system that uses 4 notches on each pawl for almost instant power transfer. The sleek and low profile hub shell is CNC’d from 6061-T6 alloy, with precision bearings, 7075 hardware and printed logos. Low drag, high engagement with minimal pedal gap. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm, Male, CrMo, Hollow Axle with 6mm allen key insert DRIVER:9T SPOKE HOLES:36h WEIGHT:TBC
The dependable Federal Aero XL Rim laced to the proven and tested female 14mm Stance Pro cassette hub using Federal spokes. ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Stance Pro AXLE: Female 14mm DRIVE SIDE: Right Side Drive RIM: Aero XL SPOKES: Federal NIPPLES: TBC WEIGHT: TBC
Female axle version - Available with a large choice of drivers from 9t through to 18t! - Select your drive side and Colour and then select your driver option at the Checkout!. Titanium Upgrades also available. Hand Made in the USA! The Profile Mini cassette sets the benchmark for Cassette hubs and was the first BMX Cassette hub. Refined over the years the hub features a heat treated 6061 aluminium Shell which houses a heat treated Aluminium internal axle and precision sealed bearings. The hub uses the bullet proof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. ###section### Product Specs HUB TYPE: Cassette AXLE: Female Bolts DRIVER: Choose In Basket DRIVE SIDE: Right Side Drive SPOKE HOLES: 36h WEIGHT: 372g / 13.01oz
Dave Fisher, Profile’s head machinist, has created these limited edition, drilled out, Profile Mini Hubs. The Cats Eye Hubs have the same internals and hardware options as the Mini Hubs. Hand made in the USA! The Profile Mini cassette sets the benchmark for cassette hubs and was the first BMX cassette hub. Refined over the years the hub features a heat treated 6061 aluminium Shell which houses a heat treated Chromoly internal axle and precision sealed bearings. The hub uses the bullet proof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. ###section### Product Specs HUB TYPE: Cassette AXLE: Male DRIVER: 9T DRIVE SIDE: Right Side Drive SPOKE HOLES: 36h WEIGHT: TBC
Odyssey 7KA rims are the original 7000 series aluminum BMX rim, and have long been a top choice for custom wheel builds. Laced to Clutch v2 freecoaster hub. ###section### Product Specs WHEEL SIZE: 20" HUB: Clutch v2 freecoaster AXLE: 14mm DRIVE SIDE: Right Side Drive RIM: Odyssey 7KA SPOKES: 36 NIPPLES: TBC WEIGHT: TBC
Utilising Wethepeople’s patented Hybrid System technology, the Shift Freecoaster Hub is up to 33% lighter than any other freecoaster and combines the smoothness and durability of a cassette hub with the endless possibilities of a freecoaster. Paired up with their own Viper and Gong Nylon hub guards and an adjustable slack system, the Shift can also easily be converted into a cassette hub in a matter of seconds. The Shift is laced to the E440. Lightweight at just 440g with a strong double walled design, The Eclat E440 has the edge over the competition. The tall profile provides rigidity while the straight side walls provide added assistance if you're running brakes. ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Shift AXLE: 14mm DRIVE SIDE: Right Side Drive RIM: Eclat E440 SPOKES: TBC NIPPLES: TBC WEIGHT: TBC