These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again increasing life and reliability. Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 73mm and 83mm shell width's.
A new hub seal and bushing is supplied with Nukeproof freehubs. To avoid damage to the hub seal, turn the freehub anti-clockwise as you fit. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Options: Shimano HG Shimano Microspline SRAM XD If you have a HG / XD hub and want to convert to microspline, you will need Nukeproof's microspline conversion kit which can be found here. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
Higher Volume Tyre Casing, Better Grip, Faster Rolling The iconic Minion DHF design is now available in PLUS sizing for even more grip, rolling performance and volume than ever before. The higher volume tyre casing provides a larger footprint on the train, which grips to the dirt and rolls over terrain unlike any Front Wheel specific tyre before it. Technologies: 3C MaxxTerra: 3C MaxxTerra is softer and offers more traction than 3C MaxxSpeed, yet provides better treadwear and less rolling resistance than MaxxGrip. The perfect compound if you like to ride exceptionally fast and tackle every obstacle with confidence. EXO Protection: Maxxis EXO tyres feature an exceptional cut-resistant and abrasion-resistant material added to the tyre sidewalls. This densely woven fabric is very lightweight and is very flexible, which guarantees that the performance of the tyre is unaffected. The EXO Protection is a superb choice for rocky, aggressive and technical trails where the chance of sidewall cuts is high. Tubeless Ready: Tubeless tyres provide many benefits: they offer the ability to run lower air pressures, which dramatically improves traction; it provides a lower rolling resistance compared to when using tubes and a drastic reduction in the change of getting a flat tyre since there is no tube.
The Minion DHF is the standard by which all other downhill tyres are measured with its tubeless ready compatibility, side walls protection provided Maxxis EXO Protection giving them increased cut/abrasion resistance and its 3C Maxx Terra compound. EXO Protection Technology An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high. TR (Tubeless Ready) Technology Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Their TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight. Maxxis Tubeless Ready tyres are the only Maxxis tyres approved for use with liquid sealants. 3C Maxx Terra An intermediate compound configuration used in select mountain tyres. 3C Maxx Terra is softer and offers more traction than 3C Maxx Speed, yet provides better treadwear and less rolling resistance than Maxx Grip.
These BMX cranks feature a hard-wearing 4130 CrMo steel construction, which makes them perfect at handling all the abuse that comes with nailing your favourite tricks. Their extra-strong 3-piece design and sturdy 19mm CrMo steel spindle makes them ideal for riders who want stronger and more dependable cranks. Includes all necessary fitting hardware.
Beefed up to cope with the rigours of fast and aggressive Downhill riding, this tough mountain bike tyre's wider shoulder tread improves handling and braking performance when conditions are sloppy under foot like soft soil and wet mud. The strong 60 TPI casing offers reliability and durability for a long-lasting, reliable Downhill tyre. Technologies: Dual Compound: Two compounds used within the tread of select tyres to offer lower rolling resistance and increased cornering grip. EXO Protection: Maxxis EXO tyres feature an exceptional cut-resistant and abrasion-resistant material added to the tyre sidewalls. This densely woven fabric is very lightweight and is very flexible, which guarantees that the performance of the tyre is unaffected. The EXO Protection is a superb choice for rocky, aggressive and technical trails where the chance of sidewall cuts is high. Tubeless Ready: Tubeless tyres provide many benefits: they offer the ability to run lower air pressures, which dramatically improves traction; it provides a lower rolling resistance compared to when using tubes and a drastic reduction in the change of getting a flat tyre since there is no tube.
This mountain bike (MTB) tyre is specifically engineered for conquering your way across hardpack and dry terrain conditions. It features an Endurance compound with balance properties on grip and endurance. With the Endurance compound a high durability in combination with good rolling resistance and grip is achieved. This makes it a compound choice for trail riding or as an endurance-focused compound for electric mountain bike (E-MTBs). Coming equipped with angled in-line shoulder studs for predictable and indulgent transitions, a high limit range can be reached predictably and safely. Continental has also added a pronounced positive profile with a large number of contact areas, so you can benefit from harmonious riding behaviour and high grip on hard and slightly loose surfaces. In addition, its pronounced ramps in the direction of rotation ensure harmonious and easy rolling, allowing for low rolling resistance and improved grip on hard surfaces. MTB Tyre with Trail Casing This MTB tyre comes kitted out with a Trail Casing, which offers comparable performance to the Enduro Casing and is tailored for trail use cases and it includes a PT layer. Another highlight is its tubeless ready technology, which allows you to benefit from tubeless advantages such as the ability to run lower tyre pressures for increased comfort, stability and fewer risks of flats or punctures. Manufacturer's Part Numbers: 1506460000 Black 2.4" 27.5" 1506470000 Black 2.4" 29"
This mountain bike (MTB) tyre is specifically designed for tackling mixed terrain conditions on your ride. It features an Endurance compound with balance properties on grip and endurance. With the Endurance compound a high durability in combination with good rolling resistance and grip is achieved. This makes it a compound choice for trail riding or as an endurance-focused compound for electric mountain bike (E-MTBs). Coming equipped with a pattern design that's especially tailored for rear wheel use, this model offers the best performance in rear wheel specific requirements like braking, traction and track stability. Its balance of a positive profile and open areas is designed for best performance in complex terrains, so you can enjoy the sweet spot between grip, self-cleaning, adaptivity and rolling characteristics. The use of steep and shallow ramps is tailored to the area of application in mixed and loose terrain, giving you an excellent balance between harmonious, easy-rolling properties and power transmission. MTB Tyre with Trail Casing This MTB tyre comes kitted out with a Trail Casing, which offers comparable performance to the Enduro Casing and is tailored for trail use cases and it includes a PT layer. Another highlight is its tubeless ready technology, which allows you to benefit from tubeless advantages such as the ability to run lower tyre pressures for increased comfort, stability and fewer risks of flats or punctures. Manufacturer's Part Numbers: 1506370000 Black 2.4" 27.5" 1506390000 Black 2.6" 27.5" 1506380000 Black 2.4" 29" 1506400000 Black 2.6" 29"
Genuine Prime replacement parts
Genuine Prime replacement parts
Genuine Prime replacement parts
The Wahoo KICKR SNAP 142mm Rear Axle Adapter Kit is ideal for riders in the road disc brake revolution.