The lightest Dynaplug yet, the Racer Ultralight uses tough glass-reinforced injected nylon construction to get the racer's already low weight down to a barely there 14 grams Also included is a custom silicon holder, tested for a year in the back country of California and the UK, this lightweight mount fits under your bottle cage and holds your racer securely and rattle-freeDynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride,When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool, depositing the repair plug in the tyre, done!,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and go, go, GO!,The double-ended racer holds two preloaded insertion tubes; one with a standard soft nose plug for standard holes and one with an extra-large Megaplug for fixing more serious tyre damage,Each is covered by a waterproof cap, so the plugs are kept ready to go at a moment's notice, even after being strapped to your bike for months,Weighs in at just 23 grams! so even the weeniest of weight weenies have no excuses. The 93 mm length is easy to store in a pocket or strapped to a frame for faster access,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,Kit includes the tool itself with both standard and megaplug stainless steel insertion tubes, 2 x Megaplugs and 3 x soft nose standard plugs,Made with pride in the USA with patented technology and warrantied for life under normal usage.
Key Features:Want to be covered no matter what happens or just really, really hate walking home? The Megapill is for all the truly prepared boy and girl scouts out there,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,If a single plug is not enough to seal a hole, just fold the -ætail-Æ flat on the tyre; hold it with your finger and stick another one in there!,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,The Megapill is a perfectly machined, waterproof 6061 aluminum capsule that contains everything you need for epic rides in the middle of nowhere, including a grand total of 7 pre-loaded Dynaplug insertion tubes and a micro knife for cutting the plug tail,Even as the big boy of the Dynaplug range, the Megapill is only 65 x 28 mm in size and weighs just 85 grams fully loaded,Kit includes the tool, 5 x standard and 2 x Megaplug compatible stainless steel insertion tubes 5 x Soft nose standard plugs, 2 x Megaplugs, 1 x micro knife, a handy carry pouch and a pipe cleaner to help prep the tubes for reloading,Made with pride in the USA with patented technology and warrantied for life under normal usage.
The Effetto Mariposa Espresso Inflate & Repair takes all of the pain out of getting a puncture in your inner tube, tubeless tyre or tubular tyre. By combining an inflater with a sealant injector, the Espresso Inflate & Repair will help get you back up and running in no time.Combines tyre inflater with a sealant injector to get you back riding quicklyFlexible silicone hose fits directly to presta valves and is easy to useCaffelatex sealant seals holes in inner tubes up to 1mm and holes in tyres up to 5mm125ml size will inflate up to a 29x3.0 tyreNot only does the Espresso inflate your tyre back up to riding pressure, but the Caffelatex sealant also helps to seal holes up to 5mm. Caffelatex's formula contains microscopic silicate particles, allowing the sealant more time to seal holes. These particles are so small, at less than 2 microns in diameter, that the sealant is still highly fluid and easily coats the inside of your tyre or tubular. The formula also has a foaming action when the wheel is spinning, further helping to improve the sealing of any punctures.Combined with the inflating action and the easy to use flexible hose that fits directly to presta valves, should you puncture you can be back up and running in a matter of seconds. Easy to use and incredibly useful, the Effetto Mariposa Espresso Inflate & Repair is perfect for riders who want to fix a puncture in double quick time.
The Effetto Mariposa Espresso Inflate & Repair takes all of the pain out of getting a puncture in your inner tube, tubeless tyre or tubular tyre. By combining an inflater with a sealant injector, the Espresso Inflate & Repair will help get you back up and running in no time.Combines tyre inflater with a sealant injector to get you back riding quicklyFlexible silicone hose fits directly to presta valves and is easy to useCaffelatex sealant seals holes in inner tubes up to 1mm and holes in tyres up to 5mm125ml size will inflate up to a 29x3.0 tyreNot only does the Espresso inflate your tyre back up to riding pressure, but the Caffelatex sealant also helps to seal holes up to 5mm. Caffelatex's formula contains microscopic silicate particles, allowing the sealant more time to seal holes. These particles are so small, at less than 2 microns in diameter, that the sealant is still highly fluid and easily coats the inside of your tyre or tubular. The formula also has a foaming action when the wheel is spinning, further helping to improve the sealing of any punctures.Combined with the inflating action and the easy to use flexible hose that fits directly to presta valves, should you puncture you can be back up and running in a matter of seconds. Easy to use and incredibly useful, the Effetto Mariposa Espresso Inflate & Repair is perfect for riders who want to fix a puncture in double quick time.
When the damage size exceeds the maximum sealable by normal tyre sealants (around 5mm) and Caffélatex sealant escapes the hole without repairing it. ZOT! can be injected through the damage then the catalyzed Caffélatex will then be able to repair damages up to 10mm (well above the capacity of any liquid sealant). Caffelatex ZOT! Nano 10ml is the new improved formula of the original ZOT! 30ml. The Caffelatex specific catalyser is contained inside a small, flexible blister ending with a 1cm long x 1mm-diameter metal needle, activating Caffelatex (or Espresso) with surgical precision even on sensitive high-pressure tyres/tubulars. Instructions Caffélatex has to be liquid inside the tyre when the puncture occurs (ZOT! by itself has no sealing properties, it simply accelerates Caffélatex solidification). While ZOT! + Caffélatex can also work on tyre and inner tube setups, tubeless or tubeless-converted tyres are the easiest to work with. Tubulars with a tubular-tubeless construction (where the inner tube is integrated in the casing, like Tufos) are the easiest to work with. Inserting the tip of ZOT! bottle and squeezing it inside the tyre damage will instantly solidify Caffélatex, sealing holes. WARNING: simply pouring ZOT! on the outside of the tyre, won’t fix major damages. For maximum results, insert ZOT! bottle tip slightly inside the casing through the cut (to create a physical plug of solid Caffélatex inside the tyre). ZOT! solidifies Caffélatex locally, without compromising its normal lifespan inside the tyre. ZOT! has been engineered to work specifically with Caffélatex sealant formula.
Tappabuco is a Tyre Plug tool ideal for repairing punctures in Tubeless Tyres. Designed to work as an end-plug for Road and Mountain Bike Handlebars, these tubeless tyre plugs can be carried inside most Shimano and SRAM Bottom Brackets too (it fits holes with inner diameter between 15 and 20 mm). This tubeless tyre repair kit is easy to carry and fast to use.Why We Created ItTyre Plugs have become a standard way of fixing bigger punctures in Tubeless Tyres. With “Tappabuco” (Italian for stopgap or literally hole plugger) Effetto Mariposa wants to offer a practical solution for road and off-road riding, easy to carry and fast to use.Easy to CarryTyre Plug tools have to be easily reached in case of puncture but – because of their sharp shape – they should be stored in a safe way. Tappabuco solves this, as it’s designed to work as end-plug for road and mountain bike handlebars, and it can be carried inside most Shimano and SRAM Bottom Brackets too (it will fit holes with inner diameter between 15 and 20 mm). Keeping the Rubber Tyre Plug already in the Tappabuco Fork ensures fast puncture repairing of Tubeless Tyres.LightweightTappabuco is made of high density Silicone with a Stainless Steel Fork, for maximum durability and adaptability. Weight is just 13g for Tappabuco 3.5 and 11g for Tappabuco 1.5.Replacement Plugs can be kept on Tappabuco, keeping them as 5pcs card and inserting the Fork between two Plugs (the picture helps see it).Specific Version for 1.5 or 3.5mm PlugsTappabuco is available in two versions:Tappabuco 1.5:Optimized for tyre plugs 1.5mm of section, 50mm length.Tappabuco 3.5:Optimized for tyre plugs 3.5mm of section, 50mm length.While the bigger, more common 3.5mm Plug is great for bigger punctures on mtb tyres, several times a 1.5mm Plug is enough for smaller damages or road/gravel Tyres: having both available is simply better. The somehow bad reputation of 1.5mm plugs, unable to fix punctures, is due to the common mistake of using these small Plugs with big Forks… opening the hole more than size of the plug. The tiny, dedicated Fork of Tappabuco 1.5 prevents this occurrence.VersionsThree kits are available.Tappabuco 1.5 KIT:Tappabuco 1.5 + 5pcs 1.5mm Plugs.Tappabuco 3.5 KIT:Tappabuco 3.5 + 5pcs 3.5mm Plugs.Tappabuco 1.5 + 3.5 KIT:Tappabuco 1.5 + Tappabuco 3.5 + 5pcs 1.5mm Plugs + 5pcs 3.5mm Plugs.
The DynaPlugger is a simple, rugged, rad way to repair your tubeless tyre. Just find the puncture, align the tool, push into puncture, pull out and the plug stays in place. Now you're ready to get back to shredding! The DynaPlugger is a fast, dependable and lightweight tubeless repair kit, never leave home without it!No need to remove the tyre, no messy glues or solvents, just plug and rideIf a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there!A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationWhen not in use, the DynaPlugger is a pack-friendly 127 mm long and weighs just 34 grams, less than an energy gelPush fit cap ensures fast deployment when required and a spare pre-loaded insertion tube can be kept in the handleKit includes the durable glass-filled nylon tool, 4 x soft nose plugs, 2 stainless steel insertion tubes and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageDynaPlug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the insertion tube straight into the hole and extract the tool, depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the non-abrasive brass tip will not scratch your rim or puncture your rim tape. DynaPlugger is a moulded of Glass-Filled Nylon. Even though it weighs only 35 grams, this tool is extremely strong. The push-on silicone end cap can store an extra insertion tube and seals the interior storage compartment.
Ever wonder why so many Tour de France and professional mechanics rely on dropout-style bike repair stands? It’s because they can adapt to virtually any bike quickly and easily and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. Plus, the rotating platform means the bike moves while the mechanic stays put – the Sprint stand is all about efficiency for wrenching and washing. The compact and portable design accommodates almost any frame and its stable platform and durable construction is ready to take your bike maintenance to the next level. Fork or rear dropout-style mounts create the most rigid bike-stand connection 360-degree rotating platform provides quick and easy access to any aspect of your frame while you stay close to your tools Adaptable to quick-release and thru-axle frame standards Precision mounts protect the structural integrity of your frame and provide maximum stability Included frame and fork adapters: Quick-Release: 9×100 / 130 / 135mm Thru Axle: 12x100mm / 142mm / 148mm (Boost rear) Thru Axle: 15x100mm / 110mm (Boost Front) Additional adapter available for purchase: Thru Axle: 20 x 110mm Anodized 6061 T6 aluminium construction is ultralight, corrosion-resistant and incredibly durable Stiff tripod base and rubber-coated end caps create ultimate work stand stability, even on uneven surfaces Total load capacity of 85lbs (39kg) accommodates service on road, cyclocross, mountain bikes, and even electric bikes Portable and compact construction creates a remarkably small folded footprint of 5″ x 7.5″ x 30″ (13 x 19.1 x 76cm) Available travel bag is water-resistant, durable and padded to protect the stand and your other equipment Quick-release fittings make setup and storage fast and easy At 12.6lbs (5.7kg), hitting the road with this stand is never in question
Fully Adjustable, the Feedback Sports Pro Ultralight workstand is height adjustable from 90.4cm - 146.5cm (35.6" - 57.7"). Also, its clamp allows 360° rotation of the bike without readjustment. Additional Features: Ultimate Portability: Perfect when travel weight and size limits are common. Legs and clamp head quickly fold into a 37" super-compact, lightweight unit weighing just 10.5 lbs. No tools are required for easy set-up and take down. Slide Lock Clamp: Award-winning, classic Slide-Lock clamp with quarter-turn action quickly clamps without crimping or marring seat posts and tubes. Clamps in tight places and on different tube diameters. Very Stable Base: Rugged tripod configuration holds up to 65 lbs. on flat or uneven surfaces (i.e. dirt, grass, slopes etc.). Large rubber foot caps enhance grip on all surfaces. High Quality Materials: Rugged, tripod features red anodized extruded aluminium tubing with die-cast hardware and reinforced fitting for top performance. Resists corrosion and rust.
This professional-level Feedback Sports Sprint Repair Workstand is ideal for home and professional bike mechanics that prefer the stability of a traditional fork mount. Additional Features: Fork or rear dropout-style mounts create the most rigid bike-stand connection The 360-degree rotating platform provides quick and easy access to any aspect of your frame while you stay close to your tools Adaptable to quick-release and thru-axle frame standards Precision mounts protect the structural integrity of your frame and provide maximum stability Additional adapter available for purchase: Thru Axle: 20 x 110mm Anodized 6061 T6 aluminium construction is ultralight, corrosion-resistant and incredibly durable A stiff tripod base and rubber-coated end caps create ultimate work stand stability, even on uneven surfaces Accommodates service on road, cyclocross (CX), mountain bikes (MTB), and even electric bikes Portable and compact construction creates a remarkably small folded footprint of 5″ x 7.5″ x 30″ (13 x 19.1 x 76cm) Quick-release fittings make setup and storage fast and easy Lightweight, so hitting the road with this stand is never in question 3-year warranty
The fast-acting clamp on this workshop essential boasts an Innovative "Secure-Lock" features ratchet-action closing and push-button release. The updated clamp quickly gets bikes in and out of the stand, has 360° rotation and fits on different tube diameters. Also, the Feedback Sports Pro Elite Workstand has Narrow 82.5mm (3.25") jaws that fit in tight spaces and the 66mm (2.6") clamp opening accommodates recumbent and other large tubed frames. Additional Features: True Portability: Weighs only 5.9kg (13lbs), it's for compact travel and storage. Maximum stability: Stiff tripod design allows wrenching on flat or uneven surfaces. The stand holds up to 85 lbs. on uneven surfaces (i.e. dirt, grass, slopes etc.), making the Feedback Sports Pro Elite Workstand the most heavy-duty portable repair stand available. Easily holds downhill and tandem bikes. Large rubber foot caps enhance grip on all surfaces and won't fall off. Most Durable: The finest materials and proven reliability for the best, professional-quality repair stand. Completely water submergible, this stand eliminates rust and moisture damage.
This stand is built to maximise portability and functionality, delivering a well-appointed bike repair stand for all experience levels. Some of the features include a reliable spinner-knob clamp that is easily adjustable and securely holds the bike in position and a clutch arm that allows for 360-degree rotation without clamp adjustment. The solid tripod configuration holds up to 65lbs on flat or uneven surfaces. The Feedback Sports Sport Mechanic repair stand is height adjustable from 42" to 65" and folds into a 12.6lb compact unit for easy use at home, or on the go. Features: Clamp features Spinner Knob for precision closure and uniform clamping pressure 360-degree rotating clamp design provides easy access to any part of your bicycle Frame clamp work height from 1,070mm-1,660mm (42"-65") Rubber clamp jaws protect expensive components and confidently secure any bike Clamp opening up to 4.8mm (1.9") accommodates even the largest diameter tubes Anodised 6061 T6 aluminium and powder-coated steel construction is lightweight, corrosion-resistant and incredibly durable Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces Total load capacity of 29.5kg (65lbs) accommodates service on most road, cyclocross, mountain bikes, and electric bikes Portable and compact construction creates a remarkably small folded footprint of 130mm x 200mm 1,150mm (5" x 8" x 45") Quick-release fittings make setup and storage fast and easy At 5.7kg (12.6lbs), hitting the road with this stand is never in question 3-Year Warranty