Park Tool Deluxe Wall Mount Repair Stand PRS-4W-2Simple to mount on to posts or walls, the PRS-4W-2 Repair Stand benefits from Park Tool’s renowned quality and easy to use design. Once your bike is held in the clamp, this advanced bike work stand has a rotatable design, so you can position the bike at any angle for accessing hard to reach areas. Ready for frame sizes up to 76mm (3”) in diameter and aero shaped frames, the clamping pressure of the quick release clamp can be carefully adjusted to prevent damage to expensive carbon frames and seatposts. Features: Material: Steel with powder coat finish Clamp Type: 100-3D Grips nearly any tube from 23-76mm (7/8" - 3"), including aero tubes Cam-actuated adjustment system for quick entry, adjustment and exit Fully adjustable clamping pressure prevents damage to thin-walled tubes Narrow clamping jaws (7cm / 2.7") designed to clamp securely yet fit into tight areas or on short seat posts Durable replaceable clamp covers (#1960) Wall mount extends 14cm (5-1/2") from mounting surface, centre of clamp sits 33cm (13") from mounting surface when installed Mounting bolts not included Weight Limit: 45kg / 100lbs Wall Mounting Plate Size: 15x6cm (6" x 2.5") Mounting Hole Sizes: 13mm (0.5") in diameter and 100mm (4") apartManufacturer's Part Number: QKPRS4W2 Weight: 4.5kg (10lbs)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
With a powder coat finish, the The Park Tool wall mount repair stand is designed to be fitted easily to any post or wall stud, and places the clamp approximately 13 inches from the wall. Note: Mounting bolts not included.
A workshop quality repair stand for mounting onto a wall.Key Features:Uses the same 100-3C heavy duty adjustable clamp as the PRS-2OS1 and PRS-3 OS1 deluxe oversize workshop stands.Heavy duty adjustable linkage clamp fits frame tubes up to 1-5/8inches (41 mm).Designed to be wall mounted>Clamp rotates 360 degrees.Mounts easily to any flat surface.Mounting bolts not included.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
Whether you're into road cycling or mountain bike (MTB) trail riding, these emergency tyre boots from Park Tool are specifically designed to quickly and securely repair a cut or worn sidewall on your tyre. This TB-2 model is produced using a strong, waterproof vinyl membrane with a fibre weave reinforcement for excellent durability in all-weather conditions. Another highlight is it comes equipped with a super-strong pressure-sensitive adhesive that assures each boot patch stays in place in any tubed tyre, road or mountain, high or low pressure. Simply place one of these patches over the cut or tear on the inside of your tyre and continue your ride without any worries. Coming as a pack of three tyre boot patches, each one measures approximately 76x45mm (3x1.75"). Manufacturer's Part Number: QKTB2C
This bench-mounted version of the popular Park Tool PCS-10.2 Deluxe Home Mechanic Repair Stand features their world-famous cam-actuated micro-adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal. Cam actuated, micro-adjustable clamp allows quick entry and exit and fits 1" to 3" (25mm–76mm) diameter tubes and seat posts of any shape and material Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts 360° infinite clamp rotation allows the bike to placed in the optimal position for specific repairs All steel structure for maximum stiffness and durability Super strong glass-filled nylon composite fittings and top tube internals enable smooth rotation and secure positioning Mounts to any flat surface (mounting bolts not included) Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight.
Park Tool Home Mechanic Repair Stand PCS-12.2The Home Mechanic Repair Stand from Park Tool is the ideal addition for your home workshop, tool shed or garage. It's strong and durable, providing a reliable and secure clamp to hold your bike in place as your tinker, tune and maintain it. Plus, it mounts to any flat surface and offers 360° of rotation for your convenience.Secure and Reliable Bench Mounted Work StandA bench-mounted version of Park Tool's popular PCS-10.2 Deluxe Home Mechanic Repair Stand. It features their world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal.Please Note: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight. Features: Cam actuated, micro adjustable clamp allows quick entry and exit and fits 1" to 3" (25mm-76mm) diameter tubes and seat posts of any shape and material Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts 360° infinite clamp rotation allows bike to placed in optimal position for specific repairs All steel structure for maximum stiffness and durability Super strong glass-filled nylon composite fittings and top tube internals enable smooth rotation and secure positioning Mounts to any flat surface (mounting bolts not included)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Introducing the Park Tool 10.3 Deluxe Repair Stand; a full-featured bicycle work stand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper postsNarrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat postsRubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storageDurable, textured powder coat finishIntegrated height-adjustable parts trayHeight adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately)Maximum weight capacity*: 36 kg Height adjustable from 39" to 57" (990 mm 1450 mm) using convenient quick-release leverBase when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm)Folds down to 45" x 14.5" (1140 mm x 370 mm)Weight: 7.2kg (16lbs)*Please Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centred below the clamp and between the legs.The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes*.The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair.
A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit as well as a quick-release height adjustment lever for easy secure adjustment. Featuring 18' (460mm) of height adjustment and 360 degrees of clamp rotation positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability with tubular support braces a locking support yoke and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. (36kg) which allows for compatibility with virtually all two-wheeled pedal-driven bicycles including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8' to 3' (22mm - 76mm) diameter tubes and seat posts of any shape and material including aero posts and dropper posts Narrow clamping jaws (2.7'/70mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80lbs. (36kg) Height adjustable from 39' to 57' (990mm - 1450mm) using convenient quick-release lever Base when open forms a triangle of 36' x 36' x 48' (920mm x 920mm x 1210mm) Folds down to 45' x 14.5' (1140mm x 370mm) Weight: 16lbs. (7.2kg) Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs
A full-featured bicycle workstand designed and built for the home mechanicThe PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment,Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability,The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach,Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair, The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage, Durable, textured powder coat finish, Integrated height-adjustable parts tray, Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), Maximum weight capacity*: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever, Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) ,Folds down to 45 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs,.
A full-featured bicycle workstand designed and built for the home mechanic The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts Narrow clamping jaws (2.7 /70mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable, textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80lbs. (36kg) Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) Folds down to 45 x 14.5 (1140mm x 370mm) Weight: 16lbs. (7.2kg) Note: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the leg.
Create your own workshop. A bench mount version of the popular PCS-10 Home Mechanic Repair Stand with a quick adjusting cam-type clamp and durable powder coat finish. Mounts to any flat horizontal surface. Key Features: A bench mount version of their popular PCS-10 Home Mechanic Repair Stand. Features a quick adjusting cam-type clamp that fits tubes up to 76 mm (3 inches) and rotates 360 degrees for easy access to any part of the bike. Clamping pressure is fully adjustable to prevent damage to thin walled tubes. Durable powder coat finish. Mounts to any flat horizontal surface (mounting bolts not included).
Key Features: Introducing the PCS-12.2, a bench-mounted version of our popular PCS-10.2 Deluxe Home Mechanic Repair Stand, Features our world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal, Cam actuated, micro adjustable clamp allows quick entry and exit and fits 1" to 3" (25mmÔÇô76mm) diameter tubes and seat posts of any shape and material, Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts, 360° infinite clamp rotation allows bike to be placed in optimal position for specific repairs, All steel structure for maximum stiffness and durability, Super strong glass-filled nylon composite fittings and top tube internals enable smooth rotation and secure positioning, Mounts to any flat surface (mounting bolts not included), Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface, The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight..