An ingenious solution for the removal of headset cups without the need for expensive headset presses. Secure your frame in a bike stand and place the open end inside the head tube and hammer the cups out. A simple yet highly effective method that will save you both time and money.
A tough genuine Shimano tool. The FW30 has a splined contact surface for the removal of Shimano freewheels from the rear hub.
Splined contact surface for the removal of Shimano freewheels from rear hub.
Carogna Remover is a modern solvent that will soften & gelify dried-out mastic or glues from tubular rims. Then its easier to remove this debris making for the optimal (clean) surface for installation of new Effetto tub tape.
Effetto Mariposa Carogna Tubular Tape Remover (150ml) Making the removal of tub tape or glue less bothersome the Carogna Tubular Tape Remover uses a new breed of chemical that is neither smelly or dangerous. Easily spread with a brush it effectively dissolves mastic for easy removal using just a cloth. Features:Remover will dissolve the mastic, making it easy to remove with a clothCarogna Remover, thanks to its high viscosity, can be spread on the rim gluing surface with a brushNot smelly nor dangerous, the remover uses a new breed of chemicalsBuy Effetto Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bottom Bracket Remover For Outboard Systems. Compatible with Shimano Hollowtech 2, Truvativ GXP, FSA MegaExo and RaceFace X-Type bottom brackets. Includes tool for Shimano non drive crank arm adjustment cap and also 15mm hex for Truvativ LH crank bolt as found on certain models.
Valve core remover can install and remove Schrader and Presta valve cores. Precisely made from tool steel and hexagonal shape, which enables good grip.
Splined contact surface for the removal of Shimano freewheels from rear hub. USAGE For installation and removal of multiple freewheel USP Hardened steel for rigidity and durability REMARK Cannot be used for lock rings due to the difference in dimensions
A tough genuine Shimano tool. The LR15 HG Cassette And Centre Lock Disc Remover makes the installation of HG cassettes and centre lock disc brakes easy. The centre spigot improves stability during use of while the large internal diameter allows the tool to fit over all axle locknuts.
Part of a comprehensive range of freewheel removal toolsOversized centre hole and thin wall design allows use without removal of cones and locknutsInvestment cast and heat-treated for strength and durabilityOne-inch base fits end of SR-1, FRW-1 Park tools or simply an adjustable wrench or bench viceFits Sun Tour four notch freewheels
The LifeLine Headset Cup Remover is simple to use and makes headset removal quick without damaging your frame. Instructions Start by securing your frame or bike in a workstand. Feed the closed end through the steerer tube until the splayed end opens inside the steerer tube. Make sure the splayed end of the tool is sat on the lip of the cup and hammer the cup out. When removing the tool follow the closed end down to protect the tool and repeat with the remaining cup. Tip: when hammering the cup out use a rag to catch the cup instead of sending it across the room.
LifeLine Headset Cup Remover An ingenious solution for the removal of headset cups without the need for expensive headset presses. Secure your frame in a bike stand and place the open end inside the head tube and hammer the cups out. A simple yet highly effective method that will save you both time and money. Features: Fits 1.1/8" Only Buy LifeLineProducts from Chain Reaction Cycles, the World's Largest Online Bike Store.