The LifeLine Headset Cup Remover is simple to use and makes headset removal quick without damaging your frame. Instructions Start by securing your frame or bike in a workstand. Feed the closed end through the steerer tube until the splayed end opens inside the steerer tube. Make sure the splayed end of the tool is sat on the lip of the cup and hammer the cup out. When removing the tool follow the closed end down to protect the tool and repeat with the remaining cup. Tip: when hammering the cup out use a rag to catch the cup instead of sending it across the room.
Carogna Remover is a modern solvent that will soften & gelify dried-out mastic or glues from tubular rims. Then its easier to remove this debris making for the optimal (clean) surface for installation of new Effetto tub tape.
Can be used to remove the valve core from any schrader valve or from our removable core presta valves.
This LifeLine valve core remover helps prevent over-tightening and splitting of the valve stem.
The Universal Head Cup Remover will also remove the PressFit 30 (PF30) bottom bracket units. The PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner.
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Removing the crown race is an essential step when changing forks and headsets. Without the proper equipment, removing a crown race from a fork steerer can be a difficult and even damaging process. The LifeLine crown race remover features four sharp blades to reach behind the crown race and provide evenly distributed clamping force when the jaws are tightened. On the reverse, there are four recesses to securely place a screwdriver for alternate striking, allowing you to work the crown race free in a gentle and precise manner, and leaving the crown race and steerer intact. Essential for workshops and home mechanics working on fork/headset upgrades and bike refurbishments.
This efficient and easy to use BBB cassette lockring tool always ensures accuracy and comfort as you're getting the job done. Please Note: This tool needs to be used along with a cassette chain whip or cassette gripping tool (sold separately).
This glue and sealant remover is equipped with a non-aggressive proprietary formula that helps remove rim tape glue, sealant or tubular glue residue from inside rims (and many other surfaces) prior to applying Muc-Off Tubeless Rim Tape (available separately). Muc-Off has made it easy to use thanks to its spray-on aerosol design that's safe to use on most metal, plastic and carbon fibre surfaces. Ideal for keeping in your home workshop for when it's time to carry out maintenance on your wheelset. Going Tubeless Muc-Off Glue & Sealant Remover is the perfect companion for preparing your rims for a tubeless setup. Removes Sealant Residue The non-aggressive formula is perfect for removing stubborn rim tape glue and sealant residue prior to applying Muc-Off Rim Tape. Removes Sticker Adhesive It’s also perfect for removing sticker adhesive from your bike – whether you’re building your bike straight out of the box or just switching up your decals! Easy to Use The Glue & Sealant Remover comes in a handy spray aerosol which makes it super easy to dispense directly onto your rims whilst you work. Manufacturer's Part Number: 20130 200ml
Stans No Tubes Valve Core RemoverEasily remove Presta and Schrader valve cores with this Valve Core Remover from Stans No Tubes. Made from CNC 6061 aluminium and featuring an anodized finish, it slots in between spokes for seamless core removal without the hassle. Features:Use: Commuter, Touring, Cyclocross, Road, Mountain BikeUse in conjunction with their Sealant Injector or 2-ounce refill bottleHigh-quality tool is fully CNC 6061 aluminium, red anodised, and features a laser etchedKnurled end for a non-slip gripAnodized finishLaser-etched logoWeight: 10.5gBuy Stan's No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Presta-Schrader Valve Core Remover ToolThe LifeLine Valve Core Remover Tool is perfect for removing and replacing Presta valve cores. It helps to prevent you over-tightening and splitting the valve stem and is an essential tool for use to fit a valve extender when running deep profile rims. It is also very useful for removing the valve core when in the process of setting up a tubeless wheel/tyre system.Features:Material: CNC AlloyValve Type: PrestaHelps prevent over-tightening and splitting of valve stemFits valve extensions (cut-out)Fits valve cores (opening)Buy LifeLine Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.