Ideal for replacing the lost bolt that came with your Wolf Tooth ReMote, this is a high-quality and genuine spare part.
The Wolf Tooth ReMote Clamp Conversion Kit allows you to attach a Wolf Tooth ReMote Dropper Lever to a specific handlebar diameter or brake lever. This option is specifically designed for use with SRAM Matchmaker X. Genuine Wolf Tooth spare parts. Manufacturer's Part Number: WTMMCONVKIT Black One Size
By removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever. The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers. In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility: Compatible with Rockshox Reverb B Spec Stealth (internal) routing dropper posts. NOT compatible with A1 spec Reverbs NOT compatible with non-Stealth (externally routed hydraulic hose) ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Designed for the demands of today's mountain bike (MTB) trail riding disciplines, this dropper post lever is fully-equipped for wherever your next adventure takes you. It is specifically designed for Shimano I-SPEC II and includes the IS-II hardware for quick and easy installation. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. ReMote IS-II for Shimano I-SPEC II - Includes IS-II hardware. UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTEISII
This lever and cable conversion kit is specifically designed for mountain bike (MTB) riders who have a Rockshox B-post and a SRAM matchmaker clamp. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category. UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-Diameter Ball-Bearing Pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile Lever: The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-Traction Lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad Compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTESUSBMM
Featuring a 6061 T6 aluminium body with a Delrin axle, the construction on the Wolf Tooth dropper lever is tough and reliable as you conquer the most demanding mountain bike (MTB) trail riding conditions. With a design that requires much less effort to operate than most remotes on the market, this model is developed as a dependable choice of upgrade from your dropper seatpost's factory-fitted lever. Wolf Tooth has kitted out this version with a longer arm and impressively light actuation, so riders can benefit from super-smooth operation as you dominate across the mountain. Suitable for use on all cable-operated droppers, it gives you the extra leverage and fine control to quickly drop your saddle for a descent or position it perfectly for a tough climb. Compact, Ergonomic and Sturdy Dropper Lever ReMote LA, or Light Action, is another option in Wolf Tooth's class-leading ReMote line of dropper remotes. The Wolf Tooth light action remote solves common dropper remote complaints with its compact, ergonomic and sturdy design. The patent-pending ReMote LA has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Lightweight with Smooth Ball Bearing Action Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. Compatibility: - Compatible with all cable-actuated dropper posts. - Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. - If your post is not listed in the options, measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best (available separately). - ReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The updated model of the Tech 3 brake has a threaded hole and will require some modifications to the ReMote base. Technologies: Upfront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA’s solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Numbers: WTREMOTELACLMP Black 22.2mm Clamp WTREMOTELAISEV Black Shimano IS-EV WTREMOTELAHOPE Black Hope WTREMOTELAISAB Black Shimano IS-AB WTREMOTELAMM Black Matchmaker X WTREMOTELAISII Black Shimano IS-II
By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Manufacturer's Part Number: WTISABCONVKIT Black Option 1 IS-AB WTISEVCONVKIT Black Option 2 IS-EV WTISIICONVKIT Black Option 3 IS-II
Perfect for accompanying you on your off-road pursuits, this brilliant model is equipped with a 6061 T6 aluminium construction. This makes it immensely durable as you weave between the trails and tackle any trailside obstacles which obstruct your path. Wolf Tooth has also added another layer of robustness to this version by giving it a delrin axle and pusher, so you'll benefit from a tough component on rebellious rides. RockShox Reverb B-Post Dropper Remote Engineered for use with RockShox Rever B-posts, this hard-wearing model is kitted out with a leak-proof and low-maintenance mechanical actuation system. This makes it incredibly easy to set-up and use while its easy cable detachment allows for straightforward servicing when needed. Solidly-mounted with a rattle-free integrated cable adjuster, this is the ultimate choice of upgrade for riders who want smoother and more dependable drops as you dominate across the woodland.
Designed to keep you in full control across mixed terrain surfaces, the superb Wolf Tooth remote is packed when some of the finest technologies for flawless dropping performance. Solving many of the common problems associated with dropper remotes, this version offers a compact, ergonomic and sturdy build for assisting you across every inch of the mountain. Low-Profile Dropper Lever Easy to use, the super tough Wolf Tooth dropper post remote is kitted out with a low-profile lever which sits close to your handlebar. This minimises the gap between your bar and your thumb for superior control which feels like a natural extension of one of your limbs. Also reducing the likelihood of knee contact in technical terrain sections, it gives you more space around your bars to overcome challenging riding situations. Integrated Cable Adjustment Equipped with a solidly-mounted barrel adjuster, this top-quality component allows you to make on-the-fly changes quick and easy. This eliminates the rattles caused by common inline cable adjusters for a cleaner and more reliable rider-tuned set-up. Technologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad- but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here. High-traction lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.
Easy-to-use tool removes and installs replacement bushingsIncludes retaining tool top cap and all three eyelet slammersFits all eyelet sizes - 10 mm 12 mm and 1/2 inch
The Remote Grips feature a multi-directional ribbed grip profile to give increased traction even with sweaty hands. Designed with brakeless street riders in mind, the Remote Grip is 160mm long for modern wider bars. Made with Wethepeople's own super soft compound rubber for exceptional grip. ###section### Product Specs DIAMETER: 29mm LENGTH: 160mm PACK SIZE: 2 (Pair)
Removable brake mount kit for current WeThePeople Frames, the kit includes two brake lugs, gyro tabs and cable guides. For use with WeThePeople frames made between 2013-2018 NOT COMPATIBLE WITH THE WETHEPEOPLE MESSAGE FRAME.