Garmin Edge Remote ControlKeep your focus with this remote control that allows you to control your, compatible, Garmin Edge computer without removing your hands from the handlebar. The remote comes with a 3-button function. Two of the buttons allow you to mark laps and scroll through pages. The third button can be programmed from a pre-set list of functions.Easily connect the remote to your cycling computer via ANT+ wireless connectivity.The remote comes with red and green LED lights which indicate presses, pairing and sleep mode. Powered by an easily replaceable CR2032 battery – which lasts up to 1 year by utilising sleep mode when the remote is not in use.CompatibilityGarmin’s Edge Remote Control is compatible with the following Garmin devices: Edge 1000, Edge 1030, Edge 130, Edge 510, Edge 520, Edge 520 Plus, Edge 530, Edge 810, Edge 820, Edge 830, Edge Explore, Edge Explore 1000, and Edge Explore 820.In the BoxEdge RemoteRoad bike mountMountain bike mountInstallation toolManualsFeaturesAllows you to control your compatible Edge cycling computerConnects to your handlebar3-button operationUtilises ANT+ wireless connectivityEnables you to mark laps and scroll through pagesYou can programme the third button from a preset list of functionsRed and green LED lights indicate button presses, pairing and sleep modePowered by an easily replaceable CR2032 batteryBattery life of up to 1 year by entering sleep mode when not in useComes with both road bike and mountain bike mountsBuy Garmin Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Garmin’s Edge Remote comes with a 3-button design that easily mounts to your handlebars. The remote connects to your computer via ANT+ wireless connectivity. Red and green LED lights indicate button presses, pairing and sleep modes. The remote is powered by a replaceable CR2032 battery which powers the light for a year. Compatible Devices Garmin’s Edge Remote Control is compatible with the following Garmin devices: Edge 1000 Edge 1030 Edge 130 Edge 520 Edge 520 Plus Edge 530 Edge 810 Edge 820 Edge 830 In the Box Edge Remote Road bike mount Mountain bike mount Installation tool Manuals
The Garmin Road Bike Edge Remote Handlebar Mount secures your Edge remote to your handlebar and allows you to get the perfect placement, helping to keep you in full control at all times.
Control your compatible Edge cycling computer without removing your hands from the handlebar. The 3-button Edge remote uses ANT+ wireless connectivity¹ to mark laps and scroll through pages. You can even program the third button from a preset list of functions.Control your Edge with this rugged, compact and lightweight remote-control unitConvenient buttons allow you to mark laps and scroll forward or backward through pagesProgram the third button from a preset list of functionsRed and green LED lights indicate button presses, pairing and sleep mode for easy understandingEdge remote bundle includes a road bike mount and a mountain bike mount, so changing from one ride to the next is seamlessWater rated to 50m the remote unit is designed with the harshest of riding conditions in mindEasily replaceable lithium CR2032 battery lasts up to one year by entering sleep mode when not in usePack includes Edge Remote, road bike mount, mountain bike mount, installation tool and manualsRed and green LED lights indicate button presses, pairing and sleep mode. Its easily replaced CR2032 battery lasts up to 1 year by entering sleep mode when not in use. Remote comes with both road bike and mountain bike mounts.
Make your eBike work for you with the help of this rugged, compact and lightweight remote control from Garmin. Simply select 1 of the 3 buttons on the circular top face to raise or lower the current assistance level, scroll through your Edge cycling computer data screens or engage a customized third option, all using ANT+ wireless connectivity.It has never been easier to change the performance level of your bikeThe eBike remote is ready to go wherever you go since it uses a replaceable CR2032 battery that lasts up to 1 year and even features an automatic sleep mode to save battery lifeThe central LED on your remote flashes to indicate operating status as well as low battery level for both your remote and eBikeEasily secure your eBike remote within reach with 2 included handlebar mountsOptional accessories include a carabiner lanyard that attaches the remote to your belt, backpack or jacketWherever you choose to keep it, the eBike remote is your new, must-have tool for getting the most out of your ride
Control your Varia light units with this rugged, compact and lightweight remote-control unit from Garmin. This remote controls brightness on lights, controls pattern, intensity, beam focus (high-beam/low-beam) and turn signals when used with a secondary taillight.Turns lights on and offIncludes road bike and mountain bike mountsWater rated to 50m the remote unit is designed with the harshest of riding conditions in mindEasily replaceable lithium CR2032 battery lasts up to one year by entering sleep mode when not in use
Funn UpDown Dropper RemoteThis solid remote is specifically designed for use with your Funn UpDown dropper seatpost. Making it easier than ever to change your saddle's height while on the move, this sleek version easily mounts to your handlebars. As a result, you'll benefit from being able to change position with a simple flick of the lever. Weighing in at only 35g (approx), this is the ultimate choice of upgrade for riders who want fast actuation without any unnecessary weight. Features: Use: MTB Compatibility: Funn UpDown Dropper seatposts Weight: 35g (approx) Buy Funn Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Making it easier than ever to adjust your saddle's height while on the move, this sleek version easily mounts to your handlebars. As a result, you'll benefit from being able to change position with a simple flick of the lever. Weighing in at only 35g (approx), this is a perfect choice of upgrade for riders who want fast actuation without any unnecessary weight.
Economical tool that helps remove BB30 bearings from grames. Use with a hammer and punch (not included). Weight 70g
Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Transfer Universal Dropper Post RemoteEasy to install, this remote clamps around your handlebar to allow you to effortlessly control your Fox Suspension Transfer dropper seatpost. Offering improved ergonomics, this model makes operating your seatpost easier as you weave your way from trail to trail. Another benefit is its 34% lighter than the previous version, so you won't have to worry about weighing down your handlebar with unnecessary excess grams. Ideal for riders who already own the Fox Suspension Transfer dropper seatpost and want straightforward actuation on every trail adventure.The Gold StandardThe Transfer seatpost is lighter and tighter than ever before. Less weight, reduced length and decreased insertion depth means a better fit on more frames. Improved durability and easier serviceability means more riding and less downtime. Available with up to 200mm of drop, Transfer is ready to tackle the nastiest terrain.Features: Use: Mountain Bike (MTB) Size: 2x/3x Compatibility: Fox Suspension Transfer Universal Dropper Post Included: Single remoteManufacturer's Part Number: 925-06-005 Black 2x/3xBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.