Specifically designed for XC racing, this high-quality suspension fork is part of Fox Suspension's renowned Factory Series with a build that's feature-packed and engineered to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised cross country racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions. Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer. FIT4 3-Position Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-21-059 Black 29" 100mm 44mm 910-21-058 Black 29" 100mm 51mm 910-21-061 Orange 29" 100mm 44mm 910-21-044 Black 29" 120mm 51mm 910-21-043 Black 29" 120mm 44mm 910-21-042 Orange 29" 120mm 44mm
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
The Gloworm Wireless TX remote to control your wireless-capable Gloworm X2, X2 Adventure, XS or XSV (G1.0) light. This is a factory replacement for those that have lost or damaged their current remote. Super simple to pair with your wireless Gloworm light, featuring a positive click, great when being used with gloves. The TX can control one light or multiple lights in any combination. The TX has 2 buttons, A and B – In the most basic setup, one light is paired to one button, either A or B. Multiple lights can be paired to the same button at the same time, resulting in lights operating simultaneously. Alternatively, buttons A and B can be paired to different lights, providing independent control of each light. Note - the TX Wireless Remote Button (G1.0) is not compatible with G2.0 lights
These removeable cable guides feature a high-quality aluminium build, which makes them strong and durable on every trail adventure. Specifically designed for use on the NS Bikes Define AL mountain bike (MTB) frame, these are easy to attach and remove when required. Perfect for keeping your cables tidy and together as you weave from trail to trail. Comes as a pack of four front cable guides. Genuine NS Bikes spare parts. Manufacturer's Part Number: NSP-3859 Black x4 Front
Engineered for wherever your next mountain bike (MTB) adventure takes you, this dropper seatpost lever features a tough alloy body for tackling the demands from all-day epics on your favourite trails. e.thirteen has also equipped it with angle-adjustable paddle pivots on dual cartridge bearings allowing for a smooth and light action, while grip tape on the paddle ensures no-slip operation. Another highlight is it's Matchmaker compatible and perfectly integrates with all common brake levers. The Vario body allows for custom setup with three different clamp mounting positions to match your riding preferences and handlebar configuration. The e.thirteen Vario 1x Dropper Lever is the perfect complement to the Vario Infinite Dropper Post.. or any cable-actuated dropper seatpost. Manufacturer's Part Number: E13LV2001
By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Manufacturer's Part Number: WTISABCONVKIT Black Option 1 IS-AB WTISEVCONVKIT Black Option 2 IS-EV WTISIICONVKIT Black Option 3 IS-II
Easy to install, this remote clamps around your handlebar to allow you to effortlessly control your Fox Suspension Transfer dropper seatpost. Offering improved ergonomics, this model makes operating your seatpost easier as you weave your way from trail to trail. Another benefit is its 34% lighter than the previous version, so you won't have to worry about weighing down your handlebar with unnecessary excess grams. Ideal for riders who already own the Fox Suspension Transfer dropper seatpost and want straightforward actuation on every trail adventure. The Gold Standard The Transfer seatpost is lighter and tighter than ever before. Less weight, reduced length and decreased insertion depth means a better fit on more frames. Improved durability and easier serviceability means more riding and less downtime. Available with up to 200mm of drop, Transfer is ready to tackle the nastiest terrain. Manufacturer's Part Number: 925-06-005 Black 2x/3x
This remote lever mounts on the left underneath your handlebars instead of a shift lever and delivers fast and accurate operation when you need to adjust your height.
This wireless remote is compatible with the Ravemen PR1600 front cycle light.
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Whether you're exploring gravel roads or taking part in a cross country (XC) racing event, this drop bar lever is a perfect choice for simple and intuitive operation. It is specifically designed for use with the Fox Suspension Transfer SL Vario seatpost and it allows you to control your dropper post from the comfort of your handlebar. Suitable for use with road and gravel bike drop handlebars, this model is easy to install and comes complete with the necessary cable housing and accessories to make the process as straightforward as possible. For quick and consistent control of your dropper seatpost, the Fox Suspension Transfer Drop Bar Dual Pull Lever is the ideal choice. Manufacturer's Part Number: 925-05-000 Black
Featuring a 6061 T6 aluminium body with a Delrin axle, the construction on the Wolf Tooth dropper lever is tough and reliable as you conquer the most demanding mountain bike (MTB) trail riding conditions. With a design that requires much less effort to operate than most remotes on the market, this model is developed as a dependable choice of upgrade from your dropper seatpost's factory-fitted lever. Wolf Tooth has kitted out this version with a longer arm and impressively light actuation, so riders can benefit from super-smooth operation as you dominate across the mountain. Suitable for use on all cable-operated droppers, it gives you the extra leverage and fine control to quickly drop your saddle for a descent or position it perfectly for a tough climb. Compact, Ergonomic and Sturdy Dropper Lever ReMote LA, or Light Action, is another option in Wolf Tooth's class-leading ReMote line of dropper remotes. The Wolf Tooth light action remote solves common dropper remote complaints with its compact, ergonomic and sturdy design. The patent-pending ReMote LA has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Lightweight with Smooth Ball Bearing Action Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. Compatibility: - Compatible with all cable-actuated dropper posts. - Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. - If your post is not listed in the options, measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best (available separately). - ReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The updated model of the Tech 3 brake has a threaded hole and will require some modifications to the ReMote base. Technologies: Upfront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA’s solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Numbers: WTREMOTELACLMP Black 22.2mm Clamp WTREMOTELAISEV Black Shimano IS-EV WTREMOTELAHOPE Black Hope WTREMOTELAISAB Black Shimano IS-AB WTREMOTELAMM Black Matchmaker X WTREMOTELAISII Black Shimano IS-II