Hope Head Doctor Headset AdjustersIf you want your regular headset tightening and adjustments to be a thing of the past, then the Head Doctor is for you. Hope has made it from anodised aluminium with laser-etched graphics for a premium look. Its expander bung replaces the traditional "star nut" design for a safer hold with more even clamping force inside your fork’s steerer tube.When you install it, two aluminium wedges simply pull together and expand inside any 1.1/8 steerer giving you a solid thread to pull the stem down. Sounds simple? It is.Features: Material: Laser etched, anodised 2014 T6 Aluminium Expandable to 26.6mm Designed to fit 1 1/8" Aluminium steerer tubes only Compatible with most brands of 1.1/8" headsets Laser-etched top cap Even loading in steerer due to full diameter expander wedge Replaces "star nut" design Not suitable for Carbon or Steel steerer tubes Weight: 29gPlease Note: Before use, take apart and grease all of the internal threads and surfaces that have to slide against one another (NOT the surface that will touch the inside of the steerer), failure to do this will make it feel tight before it is. This makes it tempting to tighten even more and as this is a lightweight alloy bolt, it will snap if over tightened. Grease threads and surfaces and it will be fine.Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tapered 1.5" Headset Reducer CrownAn adaptor to convert an 1.1/8 steerer to a 1.5", you need to purchase this reducer together with a Hope Tapered Headset to fit a standard fork into a tapered bike frame. Features:Designed to enable you to run 1 1/8" forks in a 1.5" headset cupDimensions: Internal: 30mm (to fit over 1 1/8" steerer tubes); External: 39.85mm (to fit inside 1.5" crown races)Weight: 16g (approx)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tapered Headset Cartridge BearingThe smooth-operating Tapered Headset Bearing from bike component specialists Hope is fully sealed to protect it from the elements and for riding in the toughest conditions. 52mm in diameter and 40mm internal, it’s designed for bike frames that have fully integrated tapered headtubes, such as mountain bikes (MTBs) that use forks with 1.1/8” to 1.5” tapered steerer tubes.Features:For Headset Type: Fully integrated taperedSteerer Tube Compatibility: 1.5"Dimensions: 52x40x7mm (Outer diameter x inner diameter x thicknessAngles: 45x45°Headset Compatibility: All of Hope's tapered headsetsGenuine replacement part from HopeFully sealed cartridge bearingSold individuallyCrown Race not includedManufacturer's Part Number: HS135Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pick n Mix Headsets - Bottom CupCut through the headset chaos with Hope's Pick'n'Mix Headsets - Bottom Cup. Offering top and bottom cups separately, Hope headsets should fit almost any frame and fork combination, whether it's for a mountain bike, road bike or a city bike. Produced for a silky-smooth, durable performance, this Hope headset offers precision and reliability.Stainless Steel BearingsWhilst Hope headsets aim to provide something for everyone through their Pick'n'Mix option, one consistent element in the chaos of headset sizing is Hope only using high-end materials. These hand-assembled, custom-made stainless steel bearings come with a performance guarantee and confidence that only a Hope headset can offer.Features:Material: Stainless Steel (Bearings)Style: Integral, TraditionalDurable performanceReliableBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pick n Mix Headsets - Bottom CupCut through the headset chaos with Hope's Pick'n'Mix Headsets - Bottom Cup. Offering top and bottom cups separately, Hope headsets should fit almost any frame and fork combination, whether it's for a mountain bike, road bike or a city bike. Produced for a silky-smooth, durable performance, this Hope headset offers precision and reliability.Stainless Steel BearingsWhilst Hope headsets aim to provide something for everyone through their Pick'n'Mix option, one consistent element in the chaos of headset sizing is Hope only using high-end materials. These hand-assembled, custom-made stainless steel bearings come with a performance guarantee and confidence that only a Hope headset can offer.Features:Material: Stainless Steel (Bearings)Style: Integral, TraditionalDurable performanceReliableBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pick n Mix Headsets (Top Cup)Part of the Hope Pick N Mix headset family, this top cup is a replacement for the upper part of your headset. Coming in a multitude of sizes to suit many brands of bikes whilst catering for both standard 1 1/8” and 1 1/2” steerers.A couple of things to remember though - Hope doesn't necessarily range a pair of headset cups to fit your exact bike, you may need to buy two specific sized cups separately. Hope has 4 common ‘off the shelf’ combinations and a further 18 ‘Pick n Mix’ options. There are other styles, types and fittings out there. The first thing to remember is that you need accurate dimensions if you are at all unsure of what type you need.The second point to remember is that unfortunately there is no ‘standard’ - OK, we have the dimension 1 1/8”, which covers the majority of headsets now, but as far as Integral, integrated etc...these are simply terms used by different manufacturers to determine what they consider that style to be. Measure, check and measure again.One thing that is common throughout the Hope range is the quality of materials used to manufacture them, in their Barnoldswick Factory, the quality of the custom made stainless steel bearings and the time taken to hand assemble each and every one before it leaves, on its way to you.Features: Cup Material: Aluminium Bearing Type: Fully sealed cartridge bearings with stainless steel ball bearings Steering Tube Size: 1.1/8" or 1.5” Style: Integral, Integrated, TraditionalBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Conventional EC34 HeadsetDesigned for use with standard frames and 1 1/8" fork steerers, Hope's Conventional Headset is powerful enough for downhill riding, yet still exceptionally lightweight for cross-country trails. Constructed from durable 2014 T6 aluminium, the cups, taper ring and crown race are split for ease of installation and removal. The bearings are constructed from stainless steel to prevent corrosion and are replaceable for your convenience.Features:Rubber sealed cartridge type, stainless steel bearings and additional 'O' ring seals in the cups to ensure years of maintenance-free runningIncludes Hed Doctor to replace star washerBearing Type: Sealed stainless-steel cartridge typeCups: 2014 aluminiumHead Size: 1 1/8"Upper stack height: 17mmLower stack height: 14.1mmTotal stack height: 31.1mmWeight: 90gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Headset Top CapA perfect way to start customising your bike, the Hope Alloy Headset Top Cap is a CNC machined top cap that comes in a variety of anodized colours.Features:Bolt not includedHope "Hed Doctor" bolt requiredDesigned for 1 1/8” stemsIncluded: Top Cap onlyBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tapered Integral Headset (ZS44 - ZS56)Hope’s integral headset delivers smooth and reliable rotation on every ride. With multiple seals to protect it from water and dirt ingress and fully sealed cartridge bearings, its smooth performance will last too. To further increase its durability, the cups, crown race and taper ring are all made from 2014 T6 Aluminium. It compatible with MTB frames with tapered headtubes and suspension forks with tapered steerer tubes.Reasons to Buy: Delivers a smooth and reliable rotation. Mutliple seals for added protection. Increased durability.Features: Cup Material: Machined Aluminium Steerer Size: 1 1/8" - 1.5" tapered Headtube Type/Internal Size - Top: Integral (43.95mm) Headtube Type/Internal Size - Bottom: 1.5" Integral (55.9mm) Bearings: Custom made Stainless Steel, sealed cartridge bearings Extra Features: Hed Doctor included (top cap system) Can be used with straight 1 1/8" forks with additional conversion crown (sold separately) Split crown race for easy installation and removal Multiple seals to keep out the elements Manufacturer's Reference Code: HSTN Weight: 128gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope AM/FR StemCNC machined from a single piece of 2014 T6 aluminium, the AM/FR stem brings you increased levels of strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market, it's strength and clamping force is further enhanced by the four opposing handlebar clamping bolts. To further reduce the weight, Hope adapted its design to remove extra material but without compromising on toughness or durability.Reasons to Buy: Increased strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market. Reduced weight without compromising durability.Features: Material: CNC Machined from 2014 T6 Aluminium Head size: 1-1/8" Diameter: 31.8mm Invertible: No Stem Cap Included: No Opposing steerer clamp bolts and four-bolt handlebar clamp give exceptionally rigid steering Anodised and laser etched 3D milled detailing Compatible with Hope Light systems Weight: 133g (0°)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope AM/FR StemCNC machined from a single piece of 2014 T6 aluminium, the AM/FR stem brings you increased levels of strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market, it's strength and clamping force is further enhanced by the four opposing handlebar clamping bolts. To further reduce the weight, Hope adapted its design to remove extra material but without compromising on toughness or durability.Reasons to Buy: Increased strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market. Reduced weight without compromising durability.Features: Material: CNC Machined from 2014 T6 Aluminium Head size: 1-1/8" Diameter: 31.8mm Invertible: No Stem Cap Included: No Opposing steerer clamp bolts and four-bolt handlebar clamp give exceptionally rigid steering Anodised and laser etched 3D milled detailing Compatible with Hope Light systems Weight: 133g (0°)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Cross-Country StemDesigned for tackling tough cross-country and mountain bike (MTB) trails, this Stem is made from a durable, lightweight construction for high-quality control. This stem has also been through a CNC-machining process for optimised strength to weight balance.Features:Material: CNC-machined 2014 T6 AluminiumUse: Mountain Bike (MTB), Cross-Country (XC)Clamp Diameter: 31.8mmRise: 0Steerer: 1 1/8"Weight: 124g (70mm version)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.