Hope Bottom Bracket Truvativ GXP Converter These converter rings are all you need to make your Hope bottom bracket compatible with Truvativ GXP cranks and all SRAM chainsets that have a 24-22mm tapered spindle. Suitable for mountain bike bottom brackets and road and city bikes too. Features: 2 x converter rings Specifically designed for Hope bottom brackets Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth CAMO Chain Ring BoltsThese chainring bolts are specifically designed for use with Wolf Tooth's CAMP chainring system. Coming as a pack of five bolts, these feature a hard-wearing ED coated steel construction for a secure and reliable hold. Machined from 7075-T6 Aluminium at Wolf Tooth's HQ in Minneapolis, USA, these CAMO Chainring Bolts are beautifully crafted to top-tier standards. If you're looking to adorn your bike with precision engineered components down to even the finest details, these are an ideal choice.NOTE: These are CAMO ED coated steel replacement bolts that include a blue Nylok patch for a secure installation. Your CAMO Spider comes with silver steel bolts that requires use of blue loctite. A CAMO Chainring is required to mount the CAMO Spider. See tech specs below for installation torque. CAMO coloured bolts are replacement bolts for use with CAMO chainring and spider.The CAMO chainring system was created by the Wolf Tooth engineers for Chainline And Material Optimization on direct mount style Chainrings. The key advantages include:Perfect chainline - for wear and shifting precision.Optimal material usage - for weight, stiffness, and wear.Price - for less expensive replacement chainrings.Swapping - Very fast chainring change out with 5 small bolts and no nuts.Availability - Wolf Tooth is the one-stop-shop for your direct mount needs...round or oval, stainless or aluminum, and no matter the crankset.Bling!! - spider colors and bolt colors add a little flash to your sweet ride.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.Compatibility:These bolts were specifically designed for use with our CAMO chainring system.Correct torque and blue loctite thread locker must be used if blue Nylok patch is not already applied.Installation:You will be able to access all bolts without removing the spider.Line up the little dot on the ring with the dot on the spider. Don't worry, you cannot install the ring in the wrong rotational orientation.Be sure the bosses on the spider "plug in" to the chainring.Torque bolts only to 4-5 Nm and use blue Loctite threadlocker.Features: Material: ED coated Steel Size: M5x8mm Made in the USA Part Numbers: Black: WTCAMOBLKBOLT; Blue: WTCAMOBLUBOLT; Red: WTCAMOREDBOLT; Silver: WTCAMOSILBOLT Weight: 5 bolts: 9gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Bolts for M8 Threaded Chain RingEngineered to top-level standards, these high-quality bolts are machined from 7075 T6 aluminium at Wolf Tooth's headquarters in Minneapolis, USA. Suitable for M8 threaded 1x chainrings, these feature a hard-wearing design that's ideal for riders who want to adorn their ride with precision engineered components down to the finest details. Genuine Wolf Tooth spare parts. Features: Material: 7075 T6 Aluminium Use: MTB Compatibility: M8 threaded chainring Genuine Wolf Tooth spare partsBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 5)With their tough aluminium construction, this pack of aluminium chainring bolts and nuts is a great upgrade to replace your old or lost parts and to breathe new life back into your setup. They're are suitable for use on Wolf Tooth bolt-on Drop-Stop chainrings with through holes. Plus, they can also be used with non-Wolf Tooth branded single chainrings and those with a 110mm or 130mm bolt circle diameter (BCD).Wolf Tooth designed these bolts to be the best on the market. These single chainring optimised bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut, so no spanner is needed. These are 6mm long, so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.Features:Material: 7075-T6 AluminiumSize: M8 x.75 x 5Torque Spec: 7-8 NM tightening torque with light grease on threads onlyCompatibility: Wolf Tooth bolt-on Drop-Stop chainrings with through holes, works with other brand's single chainrings as wellBolt Circle Diameter (BCD) Compatibility: 110mm or 130mmMade in the USAPart Numbers: Black: WT5CBCN06BLK; Blue: WT5CBCN06BLU; Gold: WT5CBCN06GLD; Green: WT5CBCN06GRN; Grey: WT5CBCN06GRY; Orange: WT5CBCN06ORG; Purple: WT5CBCN06PRP; Red: WT5CBCN06RED; Silver: WT5CBCN06SILWeight: 10gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blank Cub Kids BMX Bike The Blank Cub is the perfect starter bike for the younger riders wanting to get into BMX freestyle riding. With 12" wheels, modern geometry lines and scaled down in size for smaller riders, this BMX is made from Hi-Ten steel and features a full component spec from the full-size adult Blank BMX range.Features: Frame: Blank 1020 Hi Ten 11.9" Top Tube Forks: Blank Compound 12"Hi Ten Forks Brake: Rear Caliper Brake Cable: Slic Cable Brake Levers: Mini Levers Chainwheel: 25t Sprocket Steel Freewheel: 10t Chain: S410 Headset: 1-1/8" External Crank: 1pc Hot Forged 97mm Bottom Bracket: USA Open Bearing Rims: 12" 7x Design 16 Hole Alloy Front Hub: 10mm Open Bearing Steel Rear Hub: 10t 10mm Open Bearing Cassette Tyres: 12" Wanda 12 X 2 1/4" Seat: Blank Combo Junior Seat Handlebars: Blank Compound Mini 4.73" Rise Handlebar Stem: Blank 1-1/8" Ahead 40mm Short Reach Stem Grips: Mini Grips Pedal: Mini' Plastic Freestyle PedalsPlease note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy Blank Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
GT Pro Series Heritage 26 BMX BikeThe GT Pro Series Heritage 26 rolls upon 26" wheels and features modern engineering techniques and components with old-school GT Heritage styling. Taking inspiration from the early days of BMX riding, this bike looks the part and rides with sensational stability, comfort and control. It's ideal for riding at skateparks, for cruising around town and for launching off lips at your local dirt jumps. Inspired by the past for the movement of today. The Pro Series line is purpose-built with the input of GT's Bike Life Coalition to hold up to any session with your squad. Hone your skills as you raise it up in the street and become the king of your neighbourhood.Features: Frame: GT Pro Series Design, 6061 Alloy, Dt Gusset, Mid Bb, 135mm Hub Spacing, Disc Brake Mount, Integrated 1-1/8" H/t W/ Removable Rotor Tabs Fork: GT Pro Design, 100% Chromoly 2pc. Steerer, Tapered Legs, 3/8" Axle Dropouts Chain: KMC Z410 Crank: GT Power Series Chromoly 3pc., 170mm Arms, 19mm X 8t Chromoly Spindle, GT 25t Steel Chainwheel Bottom Bracket: Mid Sealed Bearing Pedals: GT Low Profile Fs Platform Design Cog Set: 16t Freewheel Rims: Alloy Double Wall, 36h Tyres: GT Smoothie 26 X 2.5" Front Hub: Alloy Body, Sealed Bearings 3/8" Axle, 36h, 15mm Nut Rear Hub: Alloy Thread-on Disc Body, Sealed Bearings, Chromoly 3/8" Slotted 14mm Axle, 36h, 17mm Nut Spokes: Stainless Steel, 14g Brakes: Promax Mech Disc, 160mm Rotors Rear Brake: Promax Mech Disc, 160mm Rotors Brake Levers: Alloy, 2 Finger Handlebar: GT Pro Series Cheat Code 2pc. 100% Chromoly, 7.875"H X 31.5"W, 5°up, 11° Back Stem: GT Front Load, 1-1/8", Cold Forged Cap, 10mm Rise, 40mm Grips: GT Super Soft Flanged 155mm Single Compound W/ GT Removable Plug Headset: 1 1/8" Integrated Design, 45x45 Degree Sealed Bearings Saddle: GT Cheat Code Railed Seat Post: Alloy Micro Adjust 27.2 X 300mm Extras: Alloy Knurled Pegs, 3-piece Pad SetPlease note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy GT Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
SE Bikes DBlocks Big Ripper 29" BMX Bike The DBlocks Big Ripper 29" takes street riding and urban cruising to the next level. The custom ride of SE Bikes rider and king of the streets, Darnell Meyers, aka Dblocks, this bike features a retro-styled aluminium frame and chromoly (CrMo) forks for an exceptional balance of strength and agility at a low weight. Plus, it's armed with top-quality SE components, 29" wheels, Freedom Thickslick tyres and stylish accessories to round out this exceptional street cruiser.Freedom ThickSlick Tyres and Power Wing Cruiser BarsIt's spec'd with specific parts that Dblocks likes, such as the Harlem camo frame paint, Freedom ThickSlick tyres, Power Wing cruiser bars, Harlem Flyer seat and Harlem Got Blocks padset. If you want to ride like the king, you need the king's bike! 29" Wheels and Freedom ThickSlick Comp TyresThey don't call it "Big Ripper" for nothin' - this BMX is a beast. If you're feeling confident and want to really show off, the 29" wheels on this bike should do more than just the trick - it should do every trick. Sturdy double-walled alloy rims and powerful alloy hubs mean you get incredible power out of each wheel rotation, plus the toughness required to stick every landing. Cruiser BMX with Aluminium Frame and CrMo ForksThe 6061 aluminium frame keeps the whole bike light so you can launch yourself with ease, and you can look good doing it too thanks to the retro CrMo Landing Gear fork. Top it off with a Dblock Edition number plate and SE Wheelie pegs and you'll have everything you need to make a lasting impression anywhere and everywhere you go. Features: Frame: Dblocks Wheelie King Model, 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts Fork: Landing Gear, Full CrMo Crankset: SE V-ridge 3-pc CrMo, Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36t Alloy SE Racing Sprocket Pedals: X-pedo Low-profile Platform with Removable Pins Chain: KMC S1 Wheelset: Sealed Bearing 36h High-flange Alloy Flip Flop Hubs with Double-wall Rims, 16t Freewheel, Stainless Spokes Tyres: Freedom Thickslick Comp, 29" X 2.10" Front & Rear Brakeset: Tektro 855al V-brake, Linear Cable Brake Levers: Tektro 316a, 2-finger Alloy Headset: Tange 1-1/8" Threadless Handlebar: CrMo Power Wing Cruiser Bar, 28" X 7", 10° Backsweep, 1° Upsweep Stem: Retro Alloy Top-load with Engraved SE Logo & Lightweight Cutouts, 55mm Reach Grips: Special Edition Odi Mushroom Ii Dual-ply Grips, Made in Usa, with Keep That Wheel Up Donuts Seat: Raise It Up Flyer Seat with Custom SE Bottle Opener Brace Seatpost: Micro-adjust Alloy, 27.2mm Seat Clamp: Alloy, 31.8mm Inner Diameter Accessories: Harlem Padset, Custom Dblocks Sticker Sheet, Alloy Valve Caps, SE Wheelie Pegs Weight: 29.9 Lbs / 13.56 KgsPlease note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy SE Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kink Roaster 12" BMX BikeThe Roaster 12" is a superb entry-level BMX bike that's designed, engineered and equipped to ensure it provides outstanding control, agility and style for your little one. Taking inspiration from their pro-level BMX range, Kink created this bike to give your kid a head start in the world of freestyle BMX riding. It features a durable Hi-Ten steel frameset, fast-spinning Mission wheels wrapped in high-grip 2.25" tyres. And it's equipped with a coaster brake, so junior riders don't have to change their grip on the handlebars when slowing down.Freestyle BMX Bike Designed for KidsSimply put, the Kink Roaster is designed to be a kid's first proper BMX bike. The 12” wheel and frame size make it an easy transition from a balance bike and means kids will feel completely comfortable on their first pedalling bike. Once again, this bike isn't simply a bike with 12” wheels or merely a miniaturized BMX bike. It factors into account standard BMX geometry and applies them to a younger child's size and needs.Stable, Durable and Adjustable Freestyle BMXThe Gloss Digital Red colourway pops while the bike sports some great components throughout. In addition to the 5” Kink T500 bars and 12” Kink Lance forks, the Roaster features a coaster brake in place of a lever-based brake system, that could be too difficult for some children to use at a young age. The seatstay bridge has been designed to accept a caliper brake or 990 brake plate for those looking to add a lever style brake as well.Note: Designed for children ages 4 and up. Seat height adjustable from 15.5"-18.5". Features: Frame: Kink Roaster 100% Hi-Ten Steel Fork: Kink Lance 100% Hi-Ten Steel Tapered Fork Legs Bars: Kink T500 Bar 5” 100% Hi-Ten Steel Grips: Mission Micro Stem: Mission Frontload 30mm Headset: Standard 1 1/8" Threadless Brakes: Coaster Brake Cranks: Forged 1pc 92mm Bottom Bracket: Unsealed American Pedals: Mission Plastic Junior Chain: Mission 410 Sprocket: Mission Rank 25T Seat: Mission Weider Combo Seatpost: Mission Combo Steel Post Seat Clamp: Mission Slim Clamp Front Hub: Mission Unsealed 3/8" Axle Rear Hub: Mission Breaker Unsealed 3/8″ Coaster Brake Driver: 9T Rims: Mission X7 20H Tyres: Mission Tracker 12x2.25" Weight: 7.68 kgPlease note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Note: Manufacturer may reserve the right to change the specification of that listed or shown on this page.Buy Kink Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Subrosa Salvador BMX BikeThe ideal freestyle BMX for street, park and dirt jump riding, the Subrosa Salvador has been the first choice for pro and amateur riders for many years. With a Chromoly (CrMo) frame with fine-tuned geometry, 100% CrMo forks, bars and cranks and a fast-spinning wheelset - this bike ensures accurate transitioning, responsive handling and agile control. And year after year, it still sits comfortably as one of the best freestyle BMX bikes available on the market.Quality Shadow Conspiracy and Rant Aftermarket ComponentsThis park-dominator features a CrMo frame and fork construction that's equipped with immense components from Shadow Conspiracy and Rant. Including Rant Bangin' CrMo cranks and Rant Spring V2 brakes, so you can session any feature with pace and confidence. Plus, this year's model rolls on the highly popular, 2.35"-wide Subrosa Sawtooth tyres that offer outstanding grip and rolling speeds, even when leaning hard into bowls and quarter-pipes. Pro Level Geometry for Agility and ControlThe Salvador line has all types of options to fit exactly what your riding needs are - so you will enjoy every session without worrying if your bike will hold up. Each Salvador is built to battle with updated pro level geometry and aftermarket parts from The Shadow Conspiracy and Rant. Features: Frame Material: Chromoly Toptube, Downtube, Seat Tube Toptube: 20.5" Chainstay: 13.2" Headtube: 75° Seat Tube: 71° Standover: 9.0" Bottom Bracket Height: 11.6" Brake Mounts: Welded Forks: 100% Chromoly 30mm Offset Tapered Legs Bars: 100% Chromoly 2pc 9.0" Grips: Shadow Gipsy Bar Ends: Shadow Nylon Headset: Rant Bang Ur Integrated Stem: Rant Trill Top Load Front Rim: Rant Squad 36h Alloy Single Wall Rear Rim: Rant Squad 36h Alloy Single Wall Front Hub: 3/8" Sealed Alloy Rear Hub: Rant Party on V2 Sealed Cassette Male Axle Front Tyre: Subrosa Sawtooth 2.35" Rear Tyre: Subrosa Sawtooth 2.35" Cranks: Rant Bangin' 8 Chromoly 3pc 170mm Bottom Bracket: Sealed Mid Sprocket: Subrosa Petal Steel Gearing: 44464 Chain: Rant Max 410 Pedals: Rant Trill Plastic Seat: Subrosa Mid 1pc Combo Post: Alloy 150mm Seat Post Clamp: Shadow Alfred Brake Lever: Alloy 2 Finger Brake Cable: Linear Brakes: Rant Spring Brakes V2 Extras: N/A Weight Kg: 11.8 kg Weight Lbs: 25.9 lbs Please note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Note: Manufacturer may reserve the right to change the specification of that listed or shown on this page.Buy Subrosa Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.