Mounting Knog’s Plus Rear Light comes with a magnetic mounting system that allows you to take the light on and off your seatpost in seconds. This is especially useful for commuters who are constantly getting on and off their bike. Included with the light are all the parts you need to install the mount to a variety of types of bike frames: 2 x interchangeable straps for posts 22-27mm/28-32mm+ and magnetic mount attachment. Rechargeable For quick and easy charging on the go the light comes with an integrated USB plug that allows you to recharge the light from any standard USB port. This means you don’t have to constantly swap out batteries or remember to carry round a charging cable. Light Modes The light comes with five different light modes that can easily be switched between using the oversized, long power button that is easy to use even when wearing gloves. The light comes with five different light modes that allows you to find the perfect light mode to suit your battery life or current lighting environment. The modes included are: Mode One: Steady – 2 hours battery life Mode Two: Strobe – 8.5 hours batter life Mode Three: Pulse – 4.5 hours battery life Mode Four: Fancy Flash – 10 hours battery life Mode Five: Eco Flash – 40 hours battery life
Leveraging the legendary history of SRAM shifting, the SRAM X5 rear derailleur provides incredible shifting speed and as it incorporates precision Exact Actuation technology, it eliminates slop and shifting variation. Technologies 1:1 Actuation™: Superior by design, every unit of cable you pull moves the derailleur the same amount. Actuation stays precise and fluid slogging through mud, bouncing off rocks, rutting through roots - wherever you find yourself, whatever conditions you're in. It's dependable. Tolerant. Easiest to set up. Easiest to adjust. And, not coincidentally, the top choice of the top MTB riders Exact Actuation: When SRAM launched its road technology from scratch it reapplied its MTB proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way
Hope RS4 Centre Lock Rear ConversionThese kits are specifically for the Hope RS4 CL rear hub and enable you to match up your favourite Hope Road hub with the latest frame standards.Features: Specifically for Hope RS4 CL rear hubs Hope Part Numbers: HUB490 (QR), HUB491 (12mm thru), HUB492 (X12)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope RS4 Centre Lock Rear ConversionThese kits are specifically for the Hope RS4 CL rear hub and enable you to match up your favourite Hope Road hub with the latest frame standards.Features: Specifically for Hope RS4 CL rear hubs Hope Part Numbers: HUB490 (QR), HUB491 (12mm thru), HUB492 (X12)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope RS4 Centre Lock Rear ConversionThese kits are specifically for the Hope RS4 CL rear hub and enable you to match up your favourite Hope Road hub with the latest frame standards.Features: Specifically for Hope RS4 CL rear hubs Hope Part Numbers: HUB490 (QR), HUB491 (12mm thru), HUB492 (X12)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 2 / 4 Evo Rear Hub Conversion KitIf you’ve just upgraded your bike and want to move your Hope wheels or Hope Pro 2 Evo / Pro 4 Evo hub equipped wheels on to it, you may need alternative end caps. Available in a range of sizes to suit today’s most commonly seen axle types, these simple to fit rear hub adaptors can be installed without tools so you can hit the trails in no time.Features: Specifically for Hope Pro 2 Evo and Pro 4 rear hubs Accurately machined conversions ensure perfect fit Easily change between axle sizes, usually without tools Available for different axle types including: 10mm bolt in12mm bolt thru Quick release (QR) X12 Thru (Requires a spacer if being used with a SRAM XD freehub.) Please Note: Not compatible with Hope Pro 2 rear hubs, only the Pro 2 Evo model.Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 2 / 4 Evo Rear Hub Conversion KitIf you’ve just upgraded your bike and want to move your Hope wheels or Hope Pro 2 Evo / Pro 4 Evo hub equipped wheels on to it, you may need alternative end caps. Available in a range of sizes to suit today’s most commonly seen axle types, these simple to fit rear hub adaptors can be installed without tools so you can hit the trails in no time.Features: Specifically for Hope Pro 2 Evo and Pro 4 rear hubs Accurately machined conversions ensure perfect fit Easily change between axle sizes, usually without tools Available for different axle types including: 10mm bolt in12mm bolt thru Quick release (QR) X12 Thru (Requires a spacer if being used with a SRAM XD freehub.) Please Note: Not compatible with Hope Pro 2 rear hubs, only the Pro 2 Evo model.Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Altus M2000 9 Speed Rear DerailleurPerfect for both road cycling and gravel adventure riding disciplines, this 9 speed rear derailleur provides smooth and reliable shifting operation wherever your next ride takes you. Benefitting from a wider linkage, this model ensures maximum durability with more precise shifting. Its B tension spring also delivers quick and easy wheel installation and removal. Coming complete with high-level surface treatment for extra protection against wear, this rear mech is all set for clocking up the miles.Mega 9The 9-speed gear cluster actualises close-ratio gearing without impairing wide gear range.HG SprocketsThe distinctively designed Hyperglide sprockets incorporate specially positioned shift ramps and tooth profiles for improved chain control during shifting. Fast and responsive indexed shifting is the result. The HG cassette sprocket, which was developed for the MTB 10-speed system, underwent comprehensive optimization to achieve super-highly efficient shifting.Shimano Shadow RDThe mechanism rear derailleur, Shimano Shadow RD, is intended for more aggressive riding. Its super low-profile design carries many benefits. Because of its low profile and single tension construction, the derailleur does not hit the chain stay in rough riding conditions. The result is smooth and silent performance.Features: Use: Road, Gravel Speed: 9 speed Cage Type: Long Cage Total Capacity: 45T Low Sprocket: Max: 36T; Min: 32T Max Front Difference: 22T Top Sprocket: Max: 12T; Min: 11T Pulley Teeth: 11T Pulley Cage: SGS Cable Adjuster: Yes Sunken Type Pulley Bolt: YesA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Knog Plus Rear Bike LightA 20 lumens rear LED light with five different light modes, that’s USB rechargeable, and multiple mounting options.RechargeableKnog’s Plus Rear Light is the ideal commuter light with a convenient design. Instead of having to constantly change the light’s batteries the light is completely rechargeable. You can quickly recharge the light via any standard USB port and the light has a battery life of up to 40 hours.Light ModesThe light comes with five different light modes ranging from strobing to steady which can easily be toggled between to provide the best lighting for your current environment. The light modes included are:Steady: 2 hoursStrobe: 8.5 hoursPulse: 4.5 hoursFancy Flash: 10 hoursEco Flash: 40 hoursMountingMultiple mounting options are included with 2 interchangeable straps included for posts 22-27mm and 32mm+ which means the light can be attached to any form of bike frame. A magnetic mount also allows you to wear the light attaching it to your jacket, rucksacks, pannier, etc.Features20 lumens maximum light output5 different light modesMagnetic mounting systemUSB rechargeableWater resistant designWearableWeighs 12gDimensions: 14 x 66 x 18mmBuy Knog Lights from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM GX 10 Speed Trigger ShifterDelivering slick and crisp gear changes with your SRAM 10-Speed system, the GX Trigger Shifter gives you the fast performance you need for attacking the trails. This tough mountain bike (MTB) shifter has an aluminium lever for extra durability and a low weight, plus it can be combined with the separately sold MatchMaker clamp to free up space on your handlebars.Features: Material: Aluminium Pull Lever Speed: 10-Speed Compatibility: SRAM Exact Actuation 10-Speed flat bar shifters Recommended Group: SRAM GX 2x10-Speed Technology Highlights: Exact Actuation, MatchMaker™ Use: Mountain Bike (MTB) Pair or Single: Single Mount Type: Standard 22.2mm handlebar clamp or MatchMaker™ compatible (MatchMaker™ mount sold separately) Multi-position mounting Manufacturer's Part Number: SL-GX-1-A2 Weight: 123g Technologies:Exact Actuation: When SRAM launched its road technology from scratch, it reapplied its mountain bike (MTB) proven SRAM 1:1 actuation ratio (shifter cable travel:derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that wayBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.