Fox Suspension Steel 2.3" Travel Rear Shock SpringThis mountain bike (MTB) rear shock spring is ready to conquer every trail-riding adventure thanks to its hard-wearing steel construction, which ensures excellent strength and durability on your ride. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Features: Material: Steel Use: MTB Type: Rear Shock Spring Spring Travel: 2.3" Inner Diameter: 650lb Option: 1.385"; 700lb Option: 1.375"; 800lb Option: 1.375" Compatibility: All Fox coil rear shocks Size: Multiple options available to selectManufacturer's Part Numbers: 039-03-019 Black 650lb 1.385x4.954" 039-03-100 Black 700lb 1.375x5.200" 039-03-101 Black 800lb 1.375x5.280"Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Steel 2.35" Travel Rear Shock SpringThis mountain bike (MTB) rear shock spring features a hard-wearing steel construction, which offers excellent durability as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Features: Material: Steel Use: MTB Type: Rear Shock Spring Spring Travel: 2.35" Inner Diameter: 1.385 inches (35mm) Compatibility: All Fox coil rear shocks Size: Multiple options available to selectManufacturer's Part Numbers: 039-03-016 Black 500lb 039-03-017 Black 550lb 039-03-018 Black 600lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension SLS MTB Rear Shock Spring (3.15" Travel)This mountain bike (MTB) rear shock spring comes kitted out with a Super Light Steel (SLS) construction that's lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 3.15" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-046 Orange 375lb 033-22-047 Orange 400lb 033-22-048 Orange 425lb 033-22-049 Orange 450lb 033-22-050 Orange 475lb 033-22-051 Orange 500lb 033-22-063 Orange 525lb 033-22-052 Orange 550lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension SLS MTB Rear Shock Spring (3.15" Travel)This mountain bike (MTB) rear shock spring comes kitted out with a Super Light Steel (SLS) construction that's lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 3.15" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-046 Orange 375lb 033-22-047 Orange 400lb 033-22-048 Orange 425lb 033-22-049 Orange 450lb 033-22-050 Orange 475lb 033-22-051 Orange 500lb 033-22-063 Orange 525lb 033-22-052 Orange 550lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory Remote SV Rear ShockFeaturing a dual piston (DPS) damper, an EVOL air spring as well as two-position remote actuation and adjustment, this Factory Series mountain bike (MTB) rear shock delivers uncompromised performance wherever your trail-riding adventure leads you. Packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders, this model is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish to complement your ride.EVOL Air Spring and AdjustmentsThe Float DPS helps you make perfect turns without cutting corners by using a dual piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel.The Fox Suspension Float DPS Factory Remote SV Shock's lightweight chassis, EVOL air spring, and dual piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Two-position remote actuated Open and Firm modes, rebound and air spring pressure Remote Actuated: Yes Remote Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory Rear ShockCombining ultra-plush coil-like comfort with incredible damping expertise, this trail-ready mountain bike (MTB) rear shock brings new levels of control and performance to every terrain imaginable. Coming packed with many of Fox Suspension's proven technologies, this model is part of the renowned Factory Series and is equipped with a genuine Kashima coating for increased durability, smooth performance and an eye-catching finish. Boasting an updated chassis, damper and compression ratios, it's specially developed to exceed the demands of Factory-level riders.Air Spring Rear Shock with Variable Valve Control (VVC)Benefitting from the lightweight of its air spring and an unmatched level of tunability, this rear shock is ready for the rigours of modern trail riding. It's kitted out with high and low speed compression as well as high and low speed rebound adjustments, so you can fine-tune its suspension performance to match your riding style as well as the terrain conditions. Delivering a more rider-tuned feel, this version is also equipped with Fox Suspension's patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. The X2 changes everything, including the game. This award-winning, gravity-defying air shock holds nothing back, especially not you. With a laundry list of advanced features, the Fox Suspension Float x2 Factory Shock is ready to clean house.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psi Lever Actuated: Yes, 2-position climb lever Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Performance SV Rear MTB ShockFeaturing a hard-wearing anodised finish, this Performance Series mountain bike (MTB) rear shock offers fantastic durability and corrosion resistance as you conquer your local trails in all-weather conditions. This model is also equipped with a lightweight one-piece EVOL air spring, which ensures you'll benefit from its improved responsiveness and sensitivity as it absorbs the sudden knocks and bumps associated with trail-riding.DPS Damper and AdjustmentsThis trail-ready rear shock is kitted out with a dual piston system (DPS) damper that pairs exceptional bump compliance with efficiency, helping you conserve energy for when you need it most. Its damper uses a three position lever to allow you to easily switch between its open, medium and firm modes. Fox Suspension has also equipped this model with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, so you can fine-tune your rear suspension to fit in with your riding style as well as the terrain conditions.Features: Finish: Anodised Use: MTB Spring Type: EVOL Air Spring Damper Type: DPS damper with three positions (Open, Medium and Firm modes) Lever Actuated: Yes Remote Actuated: No Valve Design: Dual piston Adjustments: Lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressureTechnologies: DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory Remote Rear MTB ShockCombining an EVOL air spring, remote actuated open and firm modes as well as rebound and air spring pressure adjustments, this Factory Series mountain bike (MTB) rear shock is a perfect upgrade for uncompromised performance on your ride. Packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders, this model is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride.EVOL Air Spring and AdjustmentsThe Float DPS helps you make perfect turns without cutting corners by using a dual piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel.The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Two-position remote actuated Open and Firm modes, rebound and air spring pressure Remote Actuated: Yes Remote Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements your ride. DPS Damper, EVOL Air Spring and Adjustments Engineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-467 Black 190x40mm Metric 972-01-468 Black 190x42.5mm Metric 972-01-469 Black 190x45mm Metric 972-01-470 Black 210x50mm Metric 972-01-471 Black 210x55mm Metric
This Factory Series mountain bike (MTB) rear shock is packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders. Coming kitted out with a genuine Kashima coating, it provides increased durability, silky smooth operation and an eye-catching finish to complement your ride. EVOL Air Spring and Adjustments The Float DPS helps you make perfect turns without cutting corners by using a dual-piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel. The Fox Suspension Float DPS Factory Remote SV Shock's lightweight chassis, EVOL air spring, and dual-piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-510 Black 165 x 45mm Trunnion
Ready to dominate on every trail-riding adventure, this mountain bike (MTB) rear shock spring features a hard-wearing steel construction for excellent strength and durability on your ride. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Manufacturer's Part Numbers: 039-03-013 Black 350lb 039-03-014 Black 400lb
Featuring a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-021 Orange 450lb 033-22-022 Orange 475lb 033-22-023 Orange 500lb 033-22-024 Orange 550lb 033-22-025 Orange 600lb 033-22-026 Orange 650lb 033-22-027 Orange 700lb