Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Super Light Steel Rear Spring (2.5"-3")Nukeproof's Super Light Steel (SLS) Spring has been treated with a unique process to change the chemical composition to convert the Silicium/Chromium/Steel Alloy construction to create a strong, durable material, that is also incredibly lightweight.To prevent shock rub, the spring is bi-convex in shape. This will allow the spring to progress freely without any friction when under load. Up to 40% lighter than a steel spring, this hardened Super-light steel (SLS) spring has been designed to fit most rear shocks on the market by using Nukeproof’s unique Reducers and Spacers.Please Note: Not compatible with Fox 222mm shocks.Features Hardened Super Light Steel (SLS) Bi-convex in shape Fits most rear shocks on the market Includes reducers and spacers 200 – 550lb range Spring Rate Spring Weight (Grams) 200lbs 281 250lbs 300 275lbs 334 300lbs 324 325lbs 347 350lbs 363 375lbs 369 400lbs 388 425lbs 410 450lbs 450 500lbs 495 550lbs 545 Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Steel Rear Spring (2.5"-3")Nukeproof steel rear shock spring available in both 2.5” & 3” stroke options. These springs have a 38mm internal diameter. With the use of reducers you can also fit these springs to shocks with a 36mm internal diameter by using the spacers which can be found here: With the use of reducers you can also fit these springs to shocks with a 36mm internal diameter by using the spacers which can be found here.Spring Specs: Shock Stroke Rate LBS/INCH Free Length (min) Internal dia. (mm) Approx Weight (g) 2.5" (63) 350lbs 145 38mm 444 2.5" (63) 400lbs 145 38mm 464 2.5" (63) 450lbs 145 38mm 516 2.5" (63) 500lbs 145 38mm 558 2.5" (63) 550lbs 145 38mm 605 2.5" (63) 600lbs 145 38mm 600 Shock Stroke Rate LBS/INCH Free Length (min) Internal dia. (mm) Approx Weight (g) 3" (76mm) 350lbs 160 38mm 505 3" (76mm) 400lbs 160 38mm 565 3" (76mm) 450lbs 160 38mm 605 3" (76mm) 500lbs 160 38mm 650 3" (76mm) 550lbs 160 38mm 698 Features: Genuine Nukeproof part Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Rear shock Spring ReducerThis rear shock spring reducer will allow you to reduce the inner diameter of your Nukeproof rear shock spring from 38mm to 36mm. This is required when replacing a spring which has a 36mm inner diameter as standard (DVO, Fox, Cane Creek, BOS, Ohlins, Marzocchi, Manitou & X-Fusion). Features: Includes: 1 pair of reducers Size: 38mm to 36mm Part Number: NP19SHKRED Genuine Nukeproof partBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.