With a wide 22mm rim profile that's optimized for high-volume tires this UST Road Tubeless wheel system is built for adventure.Perfect for riding on rough roads gravel or dirt it gives you the smooth-riding performance of tubeless tires and makes it easy to set them up without any hassles. Low rolling resistance and a reduced risk of punctures add up to a better overall riding experience especially on rugged terrain.The wheels are engineered for the unique demands of disc brakes built up with 24 straight-pull spokes which are stronger than J-bend spokes. So wherever the road goes and however rough it gets you're ready to keep things rolling. Key benefits Purpose-built for riding rough roads gravel or dirt. 22mm wide rim takes tire up to 62mm. UST Road Tubeless technology improves comfort and rolling resistance and reduces the risk of punctures. Compatible with all standard retention systems. Proven performance and reliability at an attainable cost. High-quality QRM cartridge bearings. Disc-brake-specific sleeved-style rim technology. Straight-pull round spokes which are stronger than J-bend spokes. Rolling efficiency and a nimble ride quality. Sleeve joint rim minimizes weight. Consistent and stable spoke lacing. Low-friction hubs. Rims Tire: UST Tubeless and tubetype Material: S6000 Aluminum Valve hole diameter: 65 mm Disc brake specific profile Joint: sleeved Internal width: 23 mm Height: 22 mm ETRTO size: 622x23TC Spokes Shape: straight pull round Count: 24 front and rear Lacing: front and rear crossed 2 Material: steel Nipples: steel ABS Delivered with User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 55bar/80PSI with a 28mm tyre - 325bar/47PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Color: Black only Disc standard : 6 Bolts or Center Lock® Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 12x135 rear axle adapters (V2510901) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Riders seeking a strong durable and lightweight wheelset for rugged road and gravel adventures will find this 650B/27.5 diameter wheel with wider rims a perfect choice. It makes no compromises on responsiveness durability and ease of use.The lightweight aluminum rims feature ISM4D technology which strategically removes material from the rim where it’s not needed but keeps it around the spokes where tension is applied. Double butted spokes further reduce weight and make the wheel feel more responsive. The spokes have an aero elliptical shape that can save 5 watts of energy while maintaining your speed. Super-wide rims (25mm internal) are compatible with tubeless tires up to 64mm to absorb road shocks and vibrations. You get 5cm of “tire travel” to cushion your ride and the smaller-diameter rims allow you to retain the agile handling you want with a drop-bar bike.Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed so no tape is required. No hassles no added weight. Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer and the Instant Drive 360 freewheel coupled with our automatic bearing preload adjustment (QRM Auto) provides fast engagement stiffness and added durability. The wheels use center lock brake rotors and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release. Key benefits Traction rolling efficiency and confidence on all types of terrain Wider 650B/27.5 rims let you run larger high-volume tires and still maintain the responsive handling of a normal road bike 5cm of plush “tire travel” improves traction and comfort prevents pinch flats and lets you dial in the perfect tire pressure for the terrain UST Tubeless compatibility for lower rolling resistance Superlight and durable ISM4D rim is only 440g Patented lightweight aero spokes Automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Fore drilling doesn't require the use of rim tape - 30g saved per wheel Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer 17mm axle and new hub design ID360 freewheel technology is 12mm compatible convertible to quick release (15mm axle option through axle replacement) Rims Material: Maxtal Tire: UST Tubeless and tubetype Disc brake specific profile SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Internal width: 25 mm Hookless profile Height: 22 mm ETRTO size : 584x25TSS Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull elliptical aero double butted (patented) Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Infinity hubs Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 15mm axle (LVXXXXXX) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Riders seeking a strong durable and lightweight wheelset for rugged road and gravel adventures will find this 650B/27.5 diameter wheel with wider rims a perfect choice. It makes no compromises on responsiveness durability and ease of use.The lightweight aluminum rims feature ISM4D technology which strategically removes material from the rim where it’s not needed but keeps it around the spokes where tension is applied. Double butted spokes further reduce weight and make the wheel feel more responsive. The spokes have an aero elliptical shape that can save 5 watts of energy while maintaining your speed. Super-wide rims (25mm internal) are compatible with tubeless tires up to 64mm to absorb road shocks and vibrations. You get 5cm of “tire travel” to cushion your ride and the smaller-diameter rims allow you to retain the agile handling you want with a drop-bar bike.Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed so no tape is required. No hassles no added weight. Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer and the Instant Drive 360 freewheel coupled with our automatic bearing preload adjustment (QRM Auto) provides fast engagement stiffness and added durability. The wheels use center lock brake rotors and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release. Key benefits Traction rolling efficiency and confidence on all types of terrain Wider 650B/27.5 rims let you run larger high-volume tires and still maintain the responsive handling of a normal road bike 5cm of plush “tire travel” improves traction and comfort prevents pinch flats and lets you dial in the perfect tire pressure for the terrain UST Tubeless compatibility for lower rolling resistance Superlight and durable ISM4D rim is only 440g Patented lightweight aero spokes Automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Fore drilling doesn't require the use of rim tape - 30g saved per wheel Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer 17mm axle and new hub design ID360 freewheel technology is 12mm compatible convertible to quick release (15mm axle option through axle replacement) Rims Material: Maxtal Tire: UST Tubeless and tubetype Disc brake specific profile SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Internal width: 25 mm Hookless profile Height: 22 mm ETRTO size : 584x25TSS Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull elliptical aero double butted (patented) Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Infinity hubs Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 15mm axle (LVXXXXXX) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Cross-country racing puts a multitude of demands on a wheelset. You want one that helps you climb with speed and efficiency descend with greater control and track through the rough stuff with smooth confidence. The Crossmax SL S is a lightweight alloy wheel that does it all.Engineered with a specific rim profile that combines a 25mm internal width and our patented ISM4D technology this wheelset can boost the performance of your bike with a price that’s accessible compared to carbon wheel options. The ISM4D process machines the rim in the areas with less stress to reduce weight without compromising strength. The rim also features our Black Shield technology which protects against scratches and dents so you can charge hard through rock gardens and rough singletrack.The rims are made with our patented Fore technology with a fully sealed upper rim bridge that eliminates the need for rim tape. This saves 30 grams per wheel not to mention the hassles associated with tape when setting up tubeless tires. New Infinity hub is lighter and feature a new spoke lacing which increases stiffness for better power transfer and the Instant Drive 360 freewheel with a double ratchet provides fast engagement. The rear hub is compatible with Shimano HG9 Micro Spline and SRAM XD driver bodies. The Crossmax SL S is available with 6-bolt or center lock brake rotors in 29” only. It’s compatible with a 15x110 front axle and 12x148 rear and comes with valves replacement spokes and accessories. Key benefits Best in its class alloy XC wheelset ISM4D rim machining reduces weight to close the gap to carbon rims without compromising strength. Lighter weight rims result in super low inertia and instant acceleration. Increased traction and durability 25mm wide hookless rim profile optimized for lower tire pressures resulting in improved grip in all conditions. Optimized for modern XC tubeless tires from 2.1 to 2.30'. Black Shield treatment protects rims against impacts and scratches. Most user-friendly tubeless system Fore technology fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and durability of the rim. Rims Material: Maxtal Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Weight reduction: ISM 4D ETRTO size 29: 622x25TSS Internal width: 25 mm Hookless profile Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Hubs Instant Drive 360 freewheel technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Infinity hubs Intended use Recommended tire sizes: 52mm to 76mm (20 to 30) ASTM CATEGORY 3 : CROSS COUNTRY For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) 15mm front hub cap (V2372501 - Delivered with the wheel) Boost : Torque Caps for Center Lock hub (V2374401) ID360 Shimano Micro Spline alloy freewheel body (V3990101) Compatibility Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Cross-country racing puts a multitude of demands on a wheelset. You want one that helps you climb with speed and efficiency descend with greater control and track through the rough stuff with smooth confidence. The Crossmax SL S is a lightweight alloy wheel that does it all.Engineered with a specific rim profile that combines a 25mm internal width and our patented ISM4D technology this wheelset can boost the performance of your bike with a price that’s accessible compared to carbon wheel options. The ISM4D process machines the rim in the areas with less stress to reduce weight without compromising strength. The rim also features our Black Shield technology which protects against scratches and dents so you can charge hard through rock gardens and rough singletrack.The rims are made with our patented Fore technology with a fully sealed upper rim bridge that eliminates the need for rim tape. This saves 30 grams per wheel not to mention the hassles associated with tape when setting up tubeless tires. New Infinity hub is lighter and feature a new spoke lacing which increases stiffness for better power transfer and the Instant Drive 360 freewheel with a double ratchet provides fast engagement. The rear hub is compatible with Shimano HG9 Micro Spline and SRAM XD driver bodies. The Crossmax SL S is available with 6-bolt or center lock brake rotors in 29” only. It’s compatible with a 15x110 front axle and 12x148 rear and comes with valves replacement spokes and accessories. Key benefits Best in its class alloy XC wheelset ISM4D rim machining reduces weight to close the gap to carbon rims without compromising strength. Lighter weight rims result in super low inertia and instant acceleration. Increased traction and durability 25mm wide hookless rim profile optimized for lower tire pressures resulting in improved grip in all conditions. Optimized for modern XC tubeless tires from 2.1 to 2.30'. Black Shield treatment protects rims against impacts and scratches. Most user-friendly tubeless system Fore technology fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and durability of the rim. Rims Material: Maxtal Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Weight reduction: ISM 4D ETRTO size 29: 622x25TSS Internal width: 25 mm Hookless profile Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Hubs Instant Drive 360 freewheel technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Infinity hubs Intended use Recommended tire sizes: 52mm to 76mm (20 to 30) ASTM CATEGORY 3 : CROSS COUNTRY For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) 15mm front hub cap (V2372501 - Delivered with the wheel) Boost : Torque Caps for Center Lock hub (V2374401) ID360 Shimano Micro Spline alloy freewheel body (V3990101) Compatibility Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Cross-country racing puts a multitude of demands on a wheelset. You want one that helps you climb with speed and efficiency descend with greater control and track through the rough stuff with smooth confidence. The Crossmax SL S is a lightweight alloy wheel that does it all.Engineered with a specific rim profile that combines a 25mm internal width and our patented ISM4D technology this wheelset can boost the performance of your bike with a price that’s accessible compared to carbon wheel options. The ISM4D process machines the rim in the areas with less stress to reduce weight without compromising strength. The rim also features our Black Shield technology which protects against scratches and dents so you can charge hard through rock gardens and rough singletrack.The rims are made with our patented Fore technology with a fully sealed upper rim bridge that eliminates the need for rim tape. This saves 30 grams per wheel not to mention the hassles associated with tape when setting up tubeless tires. New Infinity hub is lighter and feature a new spoke lacing which increases stiffness for better power transfer and the Instant Drive 360 freewheel with a double ratchet provides fast engagement. The rear hub is compatible with Shimano HG9 Micro Spline and SRAM XD driver bodies. The Crossmax SL S is available with 6-bolt or center lock brake rotors in 29” only. It’s compatible with a 15x110 front axle and 12x148 rear and comes with valves replacement spokes and accessories. Key benefits Best in its class alloy XC wheelset ISM4D rim machining reduces weight to close the gap to carbon rims without compromising strength. Lighter weight rims result in super low inertia and instant acceleration. Increased traction and durability 25mm wide hookless rim profile optimized for lower tire pressures resulting in improved grip in all conditions. Optimized for modern XC tubeless tires from 2.1 to 2.30'. Black Shield treatment protects rims against impacts and scratches. Most user-friendly tubeless system Fore technology fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and durability of the rim. Rims Material: Maxtal Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Weight reduction: ISM 4D ETRTO size 29: 622x25TSS Internal width: 25 mm Hookless profile Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Hubs Instant Drive 360 freewheel technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Infinity hubs Intended use Recommended tire sizes: 52mm to 76mm (20 to 30) ASTM CATEGORY 3 : CROSS COUNTRY For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) 15mm front hub cap (V2372501 - Delivered with the wheel) Boost : Torque Caps for Center Lock hub (V2374401) ID360 Shimano Micro Spline alloy freewheel body (V3990101) Compatibility Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall which significantly reduces the risk of tire cuts and punctures. The wider 35mm rims allow you to run lower tire pressure for better traction and the rims pair perfectly with trail tires ranging from 2.6 to 3.2-inch. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape making it the easiest system for mounting and changing tubeless tires.ISM machining removes material from the rims in strategic areas to minimize weight without compromising strength and our new Black Shield finish protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts these 27.5” wheels are available for Shimano HG9 XD and Micro Spline freewheel bodies and come with UST tubeless valves spare spokes and accessories. Key benefits Reduced risk of flats stronger rim profile PFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain. Increased traction stability and control Wider 35mm (internal) rim is optimized for lower tire pressure to maximize your grip efficiency and comfort on the trail. Rim profile is optimized for modern trail tires from 2.6 to 3.2'. Most user-friendly tubeless system Fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim. Rims Material: Maxtal Weight reduction: ISM Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Internal width: 35 mm E-Bike specific rim profile ETRTO size 275: 584x35TC Black Shield treatment (protects your rim against impacts and scratches) Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Spokes Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Count: 28 front and rear Lacing: front and rear crossed 3 contactless Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 255bar/37PSI with a 54mm tyre - 13bar/19PSI with a 125mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : Torque Caps for Center Lock hub (V2374401) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Boost 20mm : 20x110 boost front hub cap (V2680401 - Not Delivered with the wheel only compatible with INT6bolts hub) 15mm front hub cap for Center Lock hub only (V2372501 - Delivered with the wheel) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall which significantly reduces the risk of tire cuts and punctures. The wider 35mm rims allow you to run lower tire pressure for better traction and the rims pair perfectly with trail tires ranging from 2.6 to 3.2-inch. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape making it the easiest system for mounting and changing tubeless tires.ISM machining removes material from the rims in strategic areas to minimize weight without compromising strength and our new Black Shield finish protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts these 27.5” wheels are available for Shimano HG9 XD and Micro Spline freewheel bodies and come with UST tubeless valves spare spokes and accessories. Key benefits Reduced risk of flats stronger rim profile PFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain. Increased traction stability and control Wider 35mm (internal) rim is optimized for lower tire pressure to maximize your grip efficiency and comfort on the trail. Rim profile is optimized for modern trail tires from 2.6 to 3.2'. Most user-friendly tubeless system Fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim. Rims Material: Maxtal Weight reduction: ISM Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Internal width: 35 mm E-Bike specific rim profile ETRTO size 275: 584x35TC Black Shield treatment (protects your rim against impacts and scratches) Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Spokes Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Count: 28 front and rear Lacing: front and rear crossed 3 contactless Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 255bar/37PSI with a 54mm tyre - 13bar/19PSI with a 125mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : Torque Caps for Center Lock hub (V2374401) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Boost 20mm : 20x110 boost front hub cap (V2680401 - Not Delivered with the wheel only compatible with INT6bolts hub) 15mm front hub cap for Center Lock hub only (V2372501 - Delivered with the wheel) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall to significantly reduce the risk of tire cuts and punctures. The 30mm wide rims allow you to run lower tire pressure for better traction and smooth rolling efficiency. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape making it the easiest system for mounting and changing tubeless tiresISM rim machining removes material from the rims in strategic areas to minimize weight without compromising strength and our new Black Shield treatment protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts these 29” wheels are available for Shimano HG9 XD and Micro Spline freewheel bodies and come with UST tubeless valves spare spokes and accessories. Key benefits Reduced risk of flats on rugged trails PFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain. Purpose-built for off-road E-bikes Wider 30mm (internal) rim adds stiffness and cornering precision. Engineered for the added torque of E-bike motors with 28 threaded three-cross spokes that further boost lateral stiffness. Most user-friendly tubeless system Fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim. Rims Material: Maxtal Weight reduction: ISM Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Internal width: 30 mm E-Bike specific rim profile Black Shield treatment (protects your rim against impacts and scratches) ETRTO size 29: 622x30TC Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Spokes Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Count: 28 front and rear Lacing: front and rear crossed 3 contactless Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 295bar/43PSI with a 52mm tyre - 155bar/22PSI with a 125mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : Torque Caps for Center Lock hub (V2374401) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Boost 20mm : 20x110 boost front hub cap (V2680401 - Not Delivered with the wheel only compatible with INT6bolts hub) 15mm front hub cap for Center Lock hub only (V2372501 - Delivered with the wheel) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall to significantly reduce the risk of tire cuts and punctures. The 30mm wide rims allow you to run lower tire pressure for better traction and smooth rolling efficiency. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape making it the easiest system for mounting and changing tubeless tiresISM rim machining removes material from the rims in strategic areas to minimize weight without compromising strength and our new Black Shield treatment protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts these 29” wheels are available for Shimano HG9 XD and Micro Spline freewheel bodies and come with UST tubeless valves spare spokes and accessories. Key benefits Reduced risk of flats on rugged trails PFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain. Purpose-built for off-road E-bikes Wider 30mm (internal) rim adds stiffness and cornering precision. Engineered for the added torque of E-bike motors with 28 threaded three-cross spokes that further boost lateral stiffness. Most user-friendly tubeless system Fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim. Rims Material: Maxtal Weight reduction: ISM Tire: UST Tubeless and tubetype Material: S6000 Aluminum SUP welding technology Fore tapeless tubeless technology Internal width: 30 mm E-Bike specific rim profile Black Shield treatment (protects your rim against impacts and scratches) ETRTO size 29: 622x30TC Pinch Flat Protection sidewall (minimizes the risk of tire cuts and punctures) Asymmetrical rim design Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) 2 replacement spokes with each wheel Spokes Nipples: Fore integrated aluminum Material: steel Shape: straight pull flat double butted Count: 28 front and rear Lacing: front and rear crossed 3 contactless Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology Hub available for 6-bolt or Center Lock® brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 180kg E-bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 295bar/43PSI with a 52mm tyre - 155bar/22PSI with a 125mm tyre Versions Disc standard : 6 Bolts or Center Lock® Hub width : Boost only (front 110 rear 148) Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : Torque Caps for Center Lock hub (V2374401) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Boost 20mm : 20x110 boost front hub cap (V2680401 - Not Delivered with the wheel only compatible with INT6bolts hub) 15mm front hub cap for Center Lock hub only (V2372501 - Delivered with the wheel) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
When you’re entering the pinball section on the Fort William World Cup downhill track or you’re flying blind on the most demanding enduro terrain at an Enduro World Series race there’s no time to be thinking about your wheels. Deemax is designed to absorb big hits and perform flawlessly on the roughest terrain giving pros and weekend warriors alike the confidence to push their limits.Developed with input from our top pro athletes this is one of the most durable wheelsets ever produced for hardcore gravity riders. It has been put to the test over and over again and recently delivered DH pros Laurie Greenland and Marine Cabirou to their first World Cup wins on the deadly Black Snake Track in Val di Sole Italy. The alloy rims feature a 28mm internal width with a triangular shape that helps absorb huge any impacts from rocks to hard landings and big compressions. Our Black Shied treatment gives them a distinctive finish and protects the rims against impacts and scratches. We chose a classical J-bend spoke construction using 28 steel spokes (same spoke length throughout) double-butted and bladed for the perfect balance of vertical compliance and strength to handle the abuses of aggressive gravity riding.The hubs benefit from our strongest bearings and the rear hub features the ultra-reliable ID360 double ratchet system for fast engagement to help you accelerate out of the corners. It’s set up for either Boost or DH hub spacing frames and has 6-bolt disc mounts. It’s available for Shimano HG9 XD and Micro Spline freewheel bodies in 27.5” and 29”. The wheels include UST tubeless valves spare spokes and accessories. Key benefits Hammer through rough terrain with confidence Wider 28mm (internal) rim is engineered to absorb heavy impacts. Developed for our pro riders to conquer the harshest DH and enduro racetracks. Proven by pros Developed tested and proven to meet the standards of World Cup DH racers and ready for hardcore bike park shredders or big mountain enduro riders. Easy to maintain Fast and easy to repair thanks to J-bend spokes. Two replacement spokes delivered with every wheelset. Rims Material: Maxtal Material: S6000 Aluminum SUP welding technology Drilling: traditional UST Tubeless Ready Internal width: 28 mm ETRTO size 275: 584x28TC ETRTO size 29: 622x28TC Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 28 front and rear Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Pre-installed tubeless rim tape 2 replacement spokes with each wheel 20X110mm boost adapters delivered with front Boost wheel 20X110mm NON-boost adapters delivered with NON boost front wheel 12X150 adapters delivered with 12X157 rear wheel Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology DH spacing axles: 12X150 12x157 Hub available for 6-bolt brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tire sizes: 60mm to 76mm (235 to 30) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 32bar/46PSI with a 47mm tyre - 285bar/41PSI with a 64mm tyre Versions Disc standard : 6 Bolts only Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Diameter: 275'' and 29'' Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Boost Axles : 15X110 ; 12X148 DH spacing axles: 12X150 12x157 12X157-7speed Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) Boost : 20x110 boost front hub cap (V2680401 - Delivered with the wheel) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel Boost : Torque Caps for 6 bolts hub (V2650401) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
When you’re entering the pinball section on the Fort William World Cup downhill track or you’re flying blind on the most demanding enduro terrain at an Enduro World Series race there’s no time to be thinking about your wheels. Deemax is designed to absorb big hits and perform flawlessly on the roughest terrain giving pros and weekend warriors alike the confidence to push their limits.Developed with input from our top pro athletes this is one of the most durable wheelsets ever produced for hardcore gravity riders. It has been put to the test over and over again and recently delivered DH pros Laurie Greenland and Marine Cabirou to their first World Cup wins on the deadly Black Snake Track in Val di Sole Italy. The alloy rims feature a 28mm internal width with a triangular shape that helps absorb big impacts—from hard-hammering rocks to hard landings and big compressions. Our Black Shied treatment gives them a distinctive finish and protects the rims against impacts and scratches. We chose a classical J-bend spoke construction using 28 steel spokes (same spoke length throughout) double-butted and bladed for the perfect balance of vertical compliance and strength to handle the abuses of aggressive gravity riding.The hubs benefit from our strongest bearings and the rear features the ultra-reliable ID360 double ratchet system for fast engagement to help you accelerate out of the corners. It’s set up for either Boost or DH hub spacing and has 6-bolt disc mounts. It’s available for Shimano HG9 XD and Micro Spline freewheel bodies in 27.5” and 29”. The wheels include UST tubeless valves spare spokes and accessories. Key benefits Hammer through rough terrain with confidence Wider 28mm (internal) rim is engineered to absorb heavy impacts. Developed for our pro riders to conquer the harshest DH and Enduro racetracks. Proven by pros Developed tested and proven to meet the standards of World Cup DH racers and ready for hardcore bike park shredders or big mountain enduro riders. Easy to maintain Fast and easy to repair thanks to J-bend spokes. Two replacement spokes delivered with every wheelset. Rims Material: Maxtal Material: S6000 Aluminum SUP welding technology Drilling: traditional UST Tubeless Ready Internal width: 28 mm ETRTO size 275: 584x28TC ETRTO size 29: 622x28TC Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 28 front and rear Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Pre-installed tubeless rim tape 2 replacement spokes with each wheel 20X110mm boost adapters delivered with front Boost wheel 20X110mm NON-boost adapters delivered with NON boost front wheel 12X150 adapters delivered with 12X157 rear wheel Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology DH spacing axles: 12X150 12x157 Hub available for 6-bolt brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tire sizes: 60mm to 76mm (235 to 30) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 32bar/46PSI with a 47mm tyre - 285bar/41PSI with a 64mm tyre Versions Disc standard : 6 Bolts only Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Diameter: 275'' and 29'' Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Boost Axles : 15X110 ; 12X148 DH spacing axles: 12X150 12x157 12X157-7speed Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : 20x110 boost front hub cap (V2680401 - Delivered with the wheel) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape