RockShox Super Deluxe Ultimate RCT Rear ShockSpecifically engineered for modern hard-hitting enduro and trail bikes, this Super Deluxe Ultimate rear shock features the ride tuning abilities of a DebonAir air spring with both compression and rebound adjustment to fine-tune to any trail. With a solid threshold adjustment for pedalling performance and Maxima Plush fluid for a buttery smooth feel, riders can now easily dial in a podium-worthy ride.Trail Ready Rear ShockTruly worthy of the latest "super bikes" and changing up the course for rear shocks. Rampant rock gardens, greasy half exposed roots, soft banked corners, loamy goodness — if there was a Holy Grail of shock control — it would be right here with the Super Deluxe family of shocks.Maxima Plush FluidDeveloped with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures.Features: Use: Mountain Bike (MTB), Enduro Air Spring: DebonAir Damper: RCT (Separate and independent Open and Threshold pistons tuned exactly for your ride) Tune Code: M/M (medium compression / medium rebound) Boost Valve Tune: 320 psi Low Speed Compression adjustment allowing fine-tuning of compression needs from the base tune Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures. Weight: 453gTechnologies: DebonAir: A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. RCT Damper: Separate and independent Open and Threshold pistons tuned exactly for your ride. SAG Gradients: Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won’t find this anywhere else but RockShox. Maxima Plush Fluid: Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures. MEGNEG: The MegNeg (aka Mega Negative) aftermarket air can provides better small bump compliance, reduces the amount of force it takes to get into your bike’s travel, and is harder to bottom out than the standard air can. Counter Measure: Counter Measure reduces the breakaway force of the shock to virtually zero pounds, transforming small bumps into traction-generating performance.Manufacturer's Part Number: 00.4118.252.147 Black/Black 230 x 65mmBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss M 1900 SP 30mm Mountain Bike Rear WheelReady for whatever the mountain can throw at you, the M 1900 straight pull (SP) 30mm rear mountain bike (MTB) wheel has a wide aluminium rim for use with today’s trend towards wider tyres. DT Swiss has created it to withstand the challenge of descending over technical terrain and to help you to maintain your line as you’re maintaining your speed.Fast Rolling and Disc Brake CompatibleKitted out with 28 DT Champion straight-pull spokes, the wheel rolls with optimum tension and toughness, with the hub acting as the ideal anchor for them. The hub itself ensures a smooth and reliable rotation and houses a freehub (various options available to select) for impressive power transfer as you ascend intimidating inclines and sprint on through singletracks. CenterLock disc brake-optimisation also improves confidence and control in all weathers, letting you ride as aggressively as you like. Coming tubeless-ready for superior grip, control and puncture protection with lower tyre pressures, the DT Swiss M 1900 SP 30mm Mountain Bike Rear Wheel is an excellent option for the adaptable off-road rider.Features: Rim Material: Aluminium Rim Type: Clincher Internal Rim Width: 30mm External Rim Width: 35mm Tubeless-Ready: Yes Spokes: DT Champion Straightpull Spoke Pattern: 3-cross lacing Spoke Nipples: DT ProLock Squorx ProHead aluminium nipples Freehub: Multiple options available to select from the drop down menu Axle Compatibility: Separate 12x142mm thru-axle or 12x148mm Boost options Disc Brake Standard: CenterLock Use: Cross Country (XC), All-Mountain (AM), Enduro Cassette Compatibility: SRAM XD Option: SRAM XD 11/12-Speed cassettes Shimano Option: 9,10 and 11-Speed Shimano type cassettes Shimano 12SP Option: Shimano Microspline 12-Speed cassettes only Recommended Maximum Rider Weight: 120kg Includes: Rear wheel, 32mm tubeless tape, 32mm tubeless valve, 6-bolt rotor mount adaptorBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo Ekar 13 Speed Gravel Rear DerailleurBringing you the tough performance and lightning quick gear changes you need for mixed-terrain riding, the Ekar rear derailleur makes the most of Campagnolo’s revolutionary 1x13-Speed road/gravel/cyclocross ready drivetrain.All-Road and Gravel Bike Ready Rear DerailleurThe Ekar rear derailleur’s revolutionary 1x13 speed specific design has been created especially for gravel and all-road. The combination of more than 70 moving parts lovingly crafted in carbon fibre, techno polymers and anodised alloys, with stainless steel bolts - exceed the demands of gravel and all-road riding. This unique combination of materials creates a derailleur which is lightweight, strong and durable for the rigours of this category of riding. It's able to combine quick, precise and reliable shifting with high chain security and toughness.The Ekar groupset has been designed for short evenly spaced shifts between gears and the 2D parallelogram trajectory of the derailleur allows for precise mechanical movement between the 13 sprockets. You can maintain your cadence, whatever terrain you are riding.Features: Material: Carbon fibre reinforced Polyamide & anodised 7075/6082 alloy construction: for light weight, strength and durability Assembly Bolts: Stainless Steel Bolts for strength and long-term resilience Mount Type: Standard hanger type mount Largest Sprocket: 44T Smallest Sprocket: 9T Only for use with Campagnolo Ekar 1x13-Speed groupsets Suitable for Gravel and All-Road riding Compatible with all three Ekar cassette options - easy to switch for gearing changes Revolutionary Clutch Lock design: for swift and easy wheel removal 2D parallelogram trajectory for precise shifting 12T upper and 14T lower jockey wheels Jockey wheels made from high-grade polymer for smooth chain running and secure retention Manufactuer's Part Number: CPB180A Weight: 275gBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Utilising Wethepeople’s patented Hybrid System technology, the Shift Freecoaster Hub is up to 33% lighter than any other freecoaster and combines the smoothness and durability of a cassette hub with the endless possibilities of a freecoaster. Paired up with their own Viper and Gong Nylon hub guards and an adjustable slack system, the Shift can also easily be converted into a cassette hub in a matter of seconds. The Shift is laced to the bondi double walled rim from Eclat. The Bondi straight wall rim features a unique broad design which spreads the impact load of severe landings more thoroughly, meaning you get a longer-lasting rim. It’s lightweight, functional and it’s made with lots of love. Constructed of 6066-T6 alloy and flash welded for strength ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Shift AXLE: 14mm DRIVE SIDE: Left Side Drive RIM: Eclat Bondi SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
Utilising Wethepeople’s patented Hybrid System technology, the Shift Freecoaster Hub is up to 33% lighter than any other freecoaster and combines the smoothness and durability of a cassette hub with the endless possibilities of a freecoaster. Paired up with their own Viper and Gong Nylon hub guards and an adjustable slack system, the Shift can also easily be converted into a cassette hub in a matter of seconds. The Shift is laced to the bondi double walled rim from Eclat. The Bondi straight wall rim features a unique broad design which spreads the impact load of severe landings more thoroughly, meaning you get a longer-lasting rim. It’s lightweight, functional and it’s made with lots of love. Constructed of 6066-T6 alloy and flash welded for strength ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Shift AXLE: 14mm DRIVE SIDE: Right Side Drive RIM: Eclat Bondi SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
Disc ready rear hub from Stay Strong. Alloy fully sealed 36 hole with a hollow axle. 6 Pawl with 180 points of engagement and alloy 7075 16T cog. ###section### Product Specs HUB TYPE:Cassette AXLE:Alloy female hollow axle DRIVER:16T SPOKE HOLES:28 WEIGHT:413g
Disc ready rear hub from Stay Strong. Alloy fully sealed 36 hole with a hollow axle. 6 Pawl with 180 points of engagement and alloy 7075 16T cog.
The Ekar rear derailleur’s all-new 1x13 speed specific design has been created especially for gravel and all-road. The combination of more than 70 moving parts lovingly crafted in carbon fibre, techno polymers and anodised alloys, with stainless steel bolts - exceed the demands of gravel and all-road riding. This unique combination of materials creates a derailleur which is lightweight, strong and durable for the rigours of this category of riding. It is able to combine quick, precise and reliable shifting with high chain security and toughness. The Ekar groupset has been designed for short evenly spaced shifts between gears and the 2D parallelogram trajectory of the derailleur allows for precise mechanical movement between the 13 sprockets. You can maintain your cadence, whatever terrain you are riding. Technologies: Revolutionary Clutch Lock design: for swift and easy wheel removal 2D parallelogram trajectory: for precise shifting 12T upper and 14T lower jockey wheels, both constructed in high-grade polymer: for smooth chain running and secure retention.
Hope Fortus 35 Mountain Bike Rear WheelReady to take on whatever challenges the trails throw at you, the Fortus 35 Mountain Bike (MTB) Rear Wheel features a 35mm-wide tubeless compatible rim and Pro 4 hub to give you the best performance whatever the terrain. Hope has constructed it from durable welded aluminium, so it’s built to withstand all the abuses of the roughest trails. It can also handle tyres up to 3" wide. Benefiting from a fast-engaging four-pawl ratchet system freehub, the Fortus 35 is an ideal option for anyone wanting to get the best out of their bike.End Caps Info- 12x142mm rear wheels come with 135 QR end caps included. - 12x148mm rear wheels do not include any other end caps.- Single Speed 135mm rear wheels come with 135x10mm bolt end caps.Features: Rim Material: Welded 6061 T6 Aluminium rim with eyelets Spoke Material: Black Sapim Race Stainless-Steel double butted spokes Spoke Nipple Material: Silver brass nipples Brake Type: Disc Brake Rotor Mount Type: 6 bolt Rim Internal Width: 35mm Rim External Width: 40mm Rim Height: 18.5mm Rim Effective Rim Diameter (ERD): 27.5": 567mm; 29": 605mm Axle Type: Separate 12x142mm and 12x148mm options Use: Cross Country (XC), Enduro, Trail Tubeless Ready: Yes Spoke Count: 32 Spoke Type: Sapim Race, stainless-steel, J-Bend Hub Type: Hope Pro 4 Freehub: Four-pawl, ratchet system with 44 tooth engagement (8.2°) Included: 37mm rim tape, tubeless valve and wipe included for tubeless setup Recommended Tyre Width: 2.5-3.0" Cassette Compatibility: "Micro Spline" Option: Shimano 12-Speed only "Shimano" Option: Shimano 9-11-Speed "SRAM XD" Option: SRAM XD 11/12-Speed "Steel" Option: Shimano 9-11-Speed Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.