Description for Cult Screamer T-Shirt - Black Large not available
The Robens Double Dreamer 4 Tent sleeps up to four campers, perfect for adventurers looking for base tent comfort with standing height and all-weather performance. Key features include a rain safe side door for water-free access, double rear and low vents to control air flow, also enhanced by mesh panels behind external doors for insect-free ventilation, and an adaptable inner tent that can fold back and enhance living space. Plus, the mesh panel window is backed by a zip-up waterproof curtain with upper PVC panel to balance privacy, ventilation and light entry. Robens Wind Test The determination of the performance of a Robens tent in wind is based on the knowledge and technique available to Robens at the time of testing. During the test they register the maximum (MAX) speed impact a tent was subjected and the average (AVG) wind speed at which structural instability occurred. This may appear as a broken/deformed pole, or the collapse of the tent and subsequent return to shape when the wind drops. At no point was any form of catastrophic failure experienced up to the maximum wind speed. The MAX speed for this tent is 200 km/h, and AVG 165 km/h.
The Robens Footprint Double Dreamer 4 will keep the groundsheet of your Robens Double Dreamer 4 Tent (sold separately) clean, as well as help protect it from abrasion and damage and provide insulation from the cold ground. Please note, the footprint should be entirely covered by the tent to prevent rain from being channeled under the floor.
The Robens Footprint Double Dreamer 5 will keep the groundsheet of your Robens Double Dreamer 5 Tent (sold separately) clean, as well as help protect it from abrasion and damage and provide insulation from the cold ground. Please note, the footprint should be entirely covered by the tent to prevent rain from being channeled under the floor.
The Robens Double Dreamer 5 Tent sleeps up to five campers, perfect for adventurers looking for base tent comfort with standing height and all-weather performance. Key features include a rain safe side door for water-free access, double rear and low vents to control air flow, also enhanced by mesh panels behind external doors for insect-free ventilation, and an adaptable inner tent that can fold back and enhance living space. Plus, the mesh panel window is backed by a zip-up waterproof curtain with upper PVC panel to balance privacy, ventilation and light entry. Robens Wind Test The determination of the performance of a Robens tent in wind is based on the knowledge and technique available to Robens at the time of testing. During the test they register the maximum (MAX) speed impact a tent was subjected and the average (AVG) wind speed at which structural instability occurred. This may appear as a broken/deformed pole, or the collapse of the tent and subsequent return to shape when the wind drops. At no point was any form of catastrophic failure experienced up to the maximum wind speed. The MAX speed for this tent is 195 km/h, and AVG 160 km/h.
Head tube reamer 1 1/8" (34 mm) complete with reamerCyclus Tools special tool to face 1 1/8" (34 mm) head tubes.The head tube reamer creates coaxially exact plane cup seats on the head tube.max. head tube length: 190mm max. milling depth: 15mm max. wall tube thickness: 4 mmUseFirst remove the conical guide from the spindle.Insert the tool from above into the head tube of the frame. Put the conical guide on the spindle again and apply pressure with the spring.Rotate the tool clockwise. Use cutting oil while working. Continue to rotate clockwise while taking the tool out of the head tube.Repeat the above steps to ream the bottom side of the head tube.TipBefore reaming remove evetually existing chrome plates on the frame to avoid early abrasion of the reamer.After reaming you might need to remove sharp edges with file.After the use clean the reamer and keep it in a safe place.
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facerBores a machined surface to a depth of approximately 25mm and then faces the end of the headtubeSHIS terminology: The 758.2 is for EC49 upper and lower headtubesUse with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life
Key Features:The #752 is used to ream BB30 bottom bracket shells to an ID of 41.94 mm.,Must be used with the HTR-1 Head Tube Reaming and Facing Set with a QK750 Centring Cone Adaptor,
Key Features:For use with the HTR-1 Head tube Reaming and Facing Set.,The 788 reams the headtube to an internal diameter at 43.95 mm to accept internal headset cups with 44.05 mm - 44.10 mm outer diameter (1-1/8 inch ZS standard)..
Key Features:Material: special tool steel,Precise design and hardened to stay sharp.,1965.1AR is used for cutting new right threads before inserting right pedal thread inserts 1695.3A.,Pedal tap 1695.1AR removes the old thread before making a new one, so no other tap is needed..Image for illustration purposes only1695.1ALMaterial: special tool steel,Precise design and hardened to stay sharp.,1965.1AL is used for cutting new left threads before inserting left pedal thread inserts 1695.3L.,Pedal tap 1695.1AL removes the old thread before making a new one, so no other tap is needed..
Head tube reamer, for conventional headset systems.