This trail-ready mountain bike (MTB) frame features a rock-solid 6061 aluminium build, which makes it more than capable of enduring the most demanding of terrain conditions. Nukeproof has also put this model through a hydroforming and triple-butting process for extra durability as you charge from trail to trail. Another highlight is its RockShox Super Deluxe Ultimate RCT rear shock, which gives you increased tuneability and control from your rear end suspension's performance. This makes it ideal for blasting across rock gardens, tree roots and whatever the trail has to throw at you on your ride. Benefitting from updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the rigours of modern trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.72Kgs/8.2lbs (Medium option)
Nukeproof Reactor 290 Alloy Frame - GreyBoasting a rock-solid 6061 aluminium build, this trail-ready mountain bike (MTB) frame is engineered to endure the most demanding of terrain conditions. Thanks to its hydroforming and triple-butting process, it offers extra durability as you charge from trail to trail. Keeping your ride smooth, its RockShox Super Deluxe Ultimate RCT rear shock also gives you increased tuneability and control for superior rear end suspension performance. This makes it perfect for blasting across rock gardens, tree roots and whatever the trail has to throw at you. Coming complete with updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the demands of modern trail riding.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Alloy MTB FrameThe Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible.The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven Carbon Fibre seat stays Use: Mountain Bike (MTB) frame Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.72Kgs/8.2lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zoggs have outdone themselves once again with the versatile Exclusive Original Predator Flex Titanium Reactor goggles. As its name suggests, the lenses used here can dim and brighten depending on how much light you’re swimming in, helping to keep your eyes protected from the sun’s harmful rays and preventing you being dazzled as you emerge from the water. On top of that, your vision is kept clear thanks to Fogbuster™ technology, and the patented Curved Lens Technology™ offers full 180-degree peripheral vision to ensure you always keep to your lane in the pool and avoid bumping into other athletes when in open water. Finally, the straps are very easy to adjust quickly on the fly, and the Flexpoint™ construction helps to avoid stiffness, while still boasting an impressive amount of durability for long lasting use. Titanium Reactor Lenses Photo-chromatic lenses react to the sun’s rays and tint according to the light conditions. The titanium coating provides added protection from reflected light reducing glare and improving visibility both outdoors as well as indoors
Nukeproof Reactor Frame Bearing KitThe Nukeproof Reactor Frame Bearing Kit suits both the 275 and 290 models and will get your full suspension mountain bike's (MTB's) rear linkage running smoothly again.These high-quality bearings are designed specifically for use in high-stress locations such as frame pivot points and they are sealed to protect them from the elements. The kit contains 4x 6901, 2x 6902, 4x 6800 bearings. This kit will fit the Alloy and Carbon Reactor bikes.Features: Genuine Nukeproof replacement bearings High-quality sealed bearings Contains: 4x 6901, 2x 6902, 4x 6800 bearingsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
These high-quality bearings are designed specifically for use in high-stress locations such as frame pivot points and they are sealed to protect them from the elements. The kit contains 4x 6901, 2x 6902, 4x 6800 bearings. This kit will fit the Alloy and Carbon Reactor bikes.
Nukeproof Reactor MTB Lower Swing Link KitThis Reactor Lower Swing Link Kit is for use with the 2020-2022 Nukeproof Reactor frame. Features:Kit Includes: 1x NP-112 (Non Drive Side Flip Chip)1x NP-111 (Lower Linkage Washer)1x NP-110 (Swing Link Lock Ring)1x NP-113 (Lower Linkage Bolt)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
This is a genuine Nukeproof bolt and but kit for your Reactor mountain bike's (MTB's) rear suspension linkage.
Nukeproof Reactor Alloy MTB Frame Protection KitThe Reactor Alloy Frame Protection Kit from Nukeproof is a genuine replacement Frame Protection Kit for the 2020-2022 Nukeproof Reactor Alloy models.This high-quality clear sticker set is precision cut to cover the essential points on your frame. It is designed to protect the paint from unsightly damage and rub during use. This kit is only designed to be fitted to the 2020-2022 Alloy Reactor models. It will not fit the Carbon models. Features: Self-adhesive Clear Gloss finish Designed and precision cut for the 2020-2022 Alloy Reactor frame Protects frame paint from unsightly damage and Rub to keep your bike looking at its best for longerBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor Mountain Bike Shock Bolt KitThis Reactor Shock Bolt Kit is for use with the 2020-2022 Nukeproof Reactor frame. Features: Kit Includes: 1x NP-129 (Shock Bolt Nut) 1x NP-130 (Shock Bolt)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor Carbon MTB Frame Protection KitThe Reactor Carbon Frame Protection Kit from Nukeproof is a genuine replacement Frame Protection Kit for the 2020-2022 Nukeproof Reactor Carbon models.This high-quality clear sticker set is precision cut to cover the essential points on your frame. It is designed to protect the paint from unsightly damage and rub during use. This kit is only designed to be fitted to the 2020-2022 Carbon Reactor models. It will not fit the Alloy models. Features: Self-adhesive Clear Gloss finish Designed and precision cut for the 2020-2022 Carbon Reactor frame Protects frame paint from unsightly damage and Rub to keep your bike looking at its best for longerBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor Horst Mountain Bike Link KitThis Reactor Horst Link Kit is for use with the 2020-2022 Nukeproof Reactor frame. Features: Kit Includes: 4x NP-120 (Horst Link Pivot Lock Ring) 4x NP-121 (Horst Link Pivot Washer) 2x NP-122 (Horst Link Pivot Axle) 2x NP-123 (Horst Link Pivot Bolt Spacer) 1x NP-124 (Horst Link Pivot Bolt)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
This high-quality clear sticker set is precision cut to cover the essential points on your frame. It is designed to protect the paint from unsightly damage and rub during use. This kit is only designed to be fitted to the 2020-2022 Carbon Reactor models. It will not fit the Alloy models.