The reception for blueseventy's original thermal suit far exceeded their expectations. blueseventy immediately heard from a growing market of eager open water swimmers who praised them for extending their outdoor swimming season. The THERMAL Reaction is their response to deliver this option to more swimmers. Built with a high-grade traditional YKK zipper for easy in and out, proven RST panels, SCS coating, triple glued seams, blind stitched and internally taped high stress areas - the only thing left to do is hook your key on the loop and jump in. MADE FOR COLD WATER Full internal zirconium jersey reduces water absorption and protects against heat loss. Paired with neoprene accessories the THERMAL Reaction is rated down to 48°F / 9°C while a standard full suit for swimming is typically good to 54°F / 12°C. VO2 CHEST PANEL A central split chest panel allows greater chest expansion and unimpeded breathing. REACTIVE STRETCH TECHNOLOGY (RST) Upgraded to silver premium Yamamoto #39 cell rubber, the RST panels improve arm mobility, reach and propulsion. S-FLEX 2mm thin side panels improve fit and body rotation in the water without sacrificing buoyancy. BUOYANCY + The THERMAL Reaction features a 4-5-4 panel design centralising core buoyancy to raise the position of the hips in relation to the rest of the body. Two 4mm chest panels accent natural lung buoyancy to optimise upper body position relative to the legs. 5mm neoprene supports the hips and lower torso, lifting the body in the water, reducing drag and improving speed. 4mm panels in the lower legs ensure a more efficient kick by keeping the legs on the surface of the water. Femme Fit Unisex isn't good enough. Fit and feel are everything. Just ask the amazing female athletes that helped blueseventy develop their women's specific range. blueseventy obsess over the fine details of all of their women's suits: smaller wrists and ankles, longer zippers to make them easier to get in and out of, and a lowered neckline to provide superior comfort and reduced chafing
A Suit That Delivers The upper body has been upgraded with a brand-new jersey liner for unrestrictive reach in the water and, new leg panelling delivers faster transition splits. Add to that a low neckline and VO2 chest panel (panels split with flexible neoprene), and you’ve got a suit that delivers everything you need for training and racing. Technologies and What Makes This the Best Reaction Yet REACTIVE STRETCH TECHNOLOGY (RST) - Further enhanced with ultra-stretch jersey, the RST panels improve arm mobility, reach and propulsion. S-FLEX - 2mm thin side panels improve fit and body rotation in the water, without sacrificing buoyancy. VO2 CHEST PANEL - A central split chest panel allows greater chest expansion and unimpeded breathing. LOWERED COLLAR - Curved closure flap reduces rear collar height, improving comfort and reducing chafing. Also features an easy-access key loop. QUICK EXIT LEGS - 2mm lower leg panels maximize the flexibility and promotes a quick release from your suit in transition. Taping on the internal seams is reinforced and allows you to cut the leg to a desired length. S-GRIP PANELS - A textured forearm print on our high stretch jersey provides extra feel for the water and additional grip in the propulsion phase of the stroke. AQUASEAL - The 4-way stretch fabric in the silicone cuffs seal the wrists from unwelcome water entry, without catching when removing the suit. BUOYANCY - The Reaction features a 4-5-4 panel design (referring to neoprene thickness), centralising core buoyancy to raise the position of the hips in relation to the rest of the body. Two 4mm chest panels accent natural lung buoyancy to optimize upper body position relative to the legs. 5mm neoprene supports the hips and lower torso, lifting the body in the water, reducing drag and improving speed. 5mm panels in the back of the hips are orientated to facilitate a raised body position when you roll to the side during breathing. FLEXIBILITY - Highly flexible 100% nylon ultra-stretch jersey is lighter and features 35% improvement in elongation compared to standard jersey. Care and storage Rinse your wetsuit in clean fresh water after each use. Dry inside out, then outside in. Keep away from direct sunlight. Avoid or limit use in chlorinated water.
Designed for Nukeproof Reactor Alloy 290 model, this genuine Nukeproof chain stay protector features a durable moulded silicone construction. Plus, it attaches to your frame's chain stay via the 3M adhesive backing and is a superb barrier against bangs, dings and dirt.
Engineered specifically for the 2020 Nukeproof Reactor Alloy 275 and 290 models, this genuine Nukeproof protector provides an exceptional barrier against mud, muck and riding mishaps thanks to their durable moulded silicone construction. It attaches to your frame's downtube via its 3M adhesive backing and offers outstanding protection against all types of dirt and damage.
This trail-ready mountain bike (MTB) frame features a rock-solid 6061 aluminium build, which makes it more than capable of enduring the most demanding of terrain conditions. Nukeproof has also put this model through a hydroforming and triple-butting process for extra durability as you charge from trail to trail. Another highlight is its RockShox Super Deluxe Ultimate RCT rear shock, which gives you increased tuneability and control from your rear end suspension's performance. This makes it ideal for blasting across rock gardens, tree roots and whatever the trail has to throw at you on your ride. Benefitting from updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the rigours of modern trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.72Kgs/8.2lbs (Medium option)
The carbon Reactor 290 frame is a trail-ready full suspension mountain bike (MTB) frame that is more than capable of handling all the demands associated with all-day epics on the trails. Ready for charging across rock gardens, tree roots and debris, Nukeproof has also kitted out this model with a high-quality RockShox Super Deluxe Ultimate RC2T rear shock that brings exceptional smoothness, and traction tuneability and control to every ride, over all terrain conditions. Designed for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or Play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate gives ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. RockShox Super Deluxe Ultimate Rear Shock Debuting a revolution in damper technology, the RC2T damper, found at the Ultimate level, allows for the most precise compression tuning ever seen—the kind that makes the millisecond’s difference between winning and learning. Tunability’s the name of the game—now you can fine-tune shock feel throughout travel from top to bottom out—or bottomless—it’s up to you to decide. Super Deluxe stakes its claim as the premier performance technology required by riders gunning for the crown. Let the winning legacy live on. Engineered to strike a chord, the new DebonAir+ system was built on the idea of tuneability. Designed to meet the needs of all types of riders, DebonAir+ offers two different air cans to augment each frame’s particular kinematics. Utilizing a needle that rations the flow of oil as the piston moves through the stroke, Hydraulic Bottom Out kicks in within the last 20% of travel, sparing you the pain of that harsh clanking bottom out after impact without sacrificing reactivity or traction. Found in our Super Deluxe lineup, Hydraulic Bottom Out plays nice with our Bottomless Tokens, allowing riders to fine-tune their air spring without worrying about bottoming out. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre, 130mm travel Use: Mountain Bike, All Mountain, Trail Shock: RockShox Super Deluxe Ultimate RC2T, Custom 0L1 32SB tune (L1 compression Tune with Linear Air Can, 0 Neg, 1 Pos Spacer and 320 lockout force) 210x55mm, Bearing End Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro Bearings Weight: 3.5Kgs/7.7lbs (Medium option) RockShox Super Deluxe Ultimate Technologies: RC2T Damper, the most tunable shock damper RockShox has ever made, offers completely independent High Speed and Low Speed Compression adjustments, eliminating “cross-talk” so you can tune your shock to exactly how you want it to perform DebonAir+ air spring maximizes fine-tuning potential, allowing you to tune both the negative and positive air volume to perfectly match your bike, desired ride feel, and the trail ahead The optional Hydraulic Bottom Out kicks in to restrict the flow of oil within the last 20% of travel, offering a soft hydraulic cushion that reduces harsh bottom out 15 clicks of Rebound adjustment offer a wider range of tunability and accommodate more rider types Castled bottom out bumper reduces harsh bottom-out, leaving extra room for the bold to go big Increased bushing overlap maximizes small bump performance and grip Separate and independent Open and Threshold pistons tuned exactly for your ride Fresh new premium graphics package to flash on the podium or as you blaze past your buddies on the doubletrack Top-of-the-line Maxima Plush Dynamic Suspension Lube reduces friction to help maintain traction
Featuring an ultra-strong T700/800 monocoque carbon fibre construction, this mountain bike (MTB) frame offers fantastic stiffness and durability without weighing down your ride with unnecessary excess grams. Nukeproof has also equipped it with a Factory Series Fox Float X rear shock for smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing, which allows you to benefit from trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is a perfect choice of upgrade for completing your full suspension MTB bike build. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.5Kgs/7.7lbs (Medium option)
These high-quality bearings are designed specifically for use in high-stress locations such as frame pivot points and they are sealed to protect them from the elements. The kit contains 4x 6901, 2x 6902, 4x 6800 bearings. This kit will fit the Alloy and Carbon Reactor bikes.
This high-quality clear sticker set is precision cut to cover the essential points on your frame. It is designed to protect the paint from unsightly damage and rub during use. This kit is only designed to be fitted to the 2020-2022 Alloy Reactor models. It will not fit the Carbon models.
This is a genuine Nukeproof bolt and but kit for your Reactor mountain bike's (MTB's) rear suspension linkage.
This Reactor Carbon Cable Guide Kit is for use with the 2020-2022 Nukeproof Reactor Carbon frame.
This Reactor Upper Swing Link Kit is for use with the 2020-2022 Nukeproof Reactor frame.