DVO Suspension Diamond D1 Boost Fork 27.5" 37mm OffsetDesigned with superb suspension technology and top-notch materials, this excellent enduro fork by DVO is the perfect companion for daring downhill endeavours. Made with an aluminium chassis and magnesium-cast lowers, it takes on every trail with 170mm of travel and an assortment of adjustments to keep you composed and in control from top to bottom. Boost-Sized, Downhill MTB ForkCombining six low-speed and 24 high-speed clicks of compression adjustment, the Diamond D1 lets you fine-tune every ride to meet the demands of the route ahead. An OTT (Off The Top) adjustment system on the negative air spring enhances control and composure over smaller bumps while the closed cartridge bladder damper and shim stack-controlled damper absorb bigger shocks. A Boost-sized thru axle gives rigidity and responsiveness when your run gets more rugged, making for a performance-focused fork for the thrill-seeking rider. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 170mm Axle: 15x110mm Boost thru axle (bolted) Offset: 37mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Diamond D1 Boost Fork 27.5" 37mm OffsetDesigned with superb suspension technology and top-notch materials, this excellent enduro fork by DVO is the perfect companion for daring downhill endeavours. Made with an aluminium chassis and magnesium-cast lowers, it takes on every trail with 170mm of travel and an assortment of adjustments to keep you composed and in control from top to bottom. Boost-Sized, Downhill MTB ForkCombining six low-speed and 24 high-speed clicks of compression adjustment, the Diamond D1 lets you fine-tune every ride to meet the demands of the route ahead. An OTT (Off The Top) adjustment system on the negative air spring enhances control and composure over smaller bumps while the closed cartridge bladder damper and shim stack-controlled damper absorb bigger shocks. A Boost-sized thru axle gives rigidity and responsiveness when your run gets more rugged, making for a performance-focused fork for the thrill-seeking rider. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 170mm Axle: 15x110mm Boost thru axle (bolted) Offset: 37mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Meet your best riding companion for drop-bar adventures. Be it a gravel grinder road ramble bikepacking trip or fast daily commute this new addition to our Allroad family is faster smoother and 140g lighter than its predecessor the Allroad Elite.The Allroad SL’s lightweight aluminum rims feature ISM4D technology which strategically removes material from the rim where it’s not needed but keeps it around the spokes where tension is applied. Double butted spokes further reduce weight and make the wheel feel more responsive. The spokes have an aero elliptical shape that can save 5 watts of energy while maintaining your speed. Wide rims (22mm internal) are compatible with tubeless tires ranging from 28mm to 64mm for a smooth efficient ride quality.Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed so no tape is required. No hassles no added weight (another 30g saved).Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer and the Instant Drive 360 freewheel coupled with our automatic bearing preload adjustment (QRM Auto) provides fast engagement stiffness and added durability. The wheels use center lock brake rotors and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release. Key benefits Ride smoother and faster on rough roads gravel and dirt 22mm wide UST rims integrated for a smooth ride with a wide range of tubeless tires from 28mm-64mm UST Road Tubeless lets you run lower tire pressure for comfort and control on rough roads No tubes means less friction better efficiency and grip and pinch-flat protection Superlight and durable ISM4D rim weighs only 440g Patented lightweight aero spokes Automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Fore drilling doesn't require the use of rim tape - 30g saved per wheel Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer 17mm axle and new hub design ID360 freewheel technology is 12mm compatible convertible to quick release (15mm axle option through axle replacement) Rims Material: Maxtal Tire: UST Tubeless and tubetype Disc brake specific profile SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Internal width: 22 mm Hookless profile ETRTO size: 622x22TSS Height: 22 mm Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull elliptical aero double butted (patented) Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 46bar/67PSI with a 28mm tyre - 327bar/39PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Infinity hubs Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 15mm axle (LVXXXXXX) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
ADVENTURE ROAD RIDINGLONG DISTANCE COMMUTINGENDURANCE AND ALL-WEATHER PAVEMENTThe Gestalt is for the drop bar rider that doesn’t want to stick to pavement, and can’t help but get dirty no matter the route. Long distance commuters and all-weather riders will appreciate the fender and rack mounts and the sure stopping disc brakes, and the larger volume tires are right at home on that unexpected detour.
Fox Suspension 34 Float Performance Grip ForkDesigned for fast and fun MTB adventures, this off-road suspension fork delivers smooth and reliable front end shock absorption on the most demanding of trails. It features a Float EVOL air spring and a FIT GRIP damper with three positions of adjustment, so you can set it up to perfectly match your riding style as well as the terrain. Fox Suspension has also equipped this model with a lightweight yet robust chassis for a superior strength to weight ratio.Features:Steerer Tube Material: AluminiumCrown Material: AluminiumStanchion Tube Material: AluminiumLower Tube Material: MagnesiumUpper Leg Finish: Anodised Use: MTB Air Spring: Float EVOL Damper: FIT GRIP Adjustment: 3-position compression (Open, Medium and Firm modes), Rebound, air pressure adjust Steerer: 1 1/8-1.5" tapered Axle: 15x100mm QR Brake Mount: Disc PM 6" (160mm direct mount))Stanchion Tube Diameter: 34mm Offset: Multiple options available Travel: 140mm Remote Operated: No Lever Operated: Yes Lockout: No Part Numbers: 29", 51mm Offset: 910-20-968; 27.5", 44mm Offset: 910-20-987; 29", 44mm Offset: 910-20-969Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Riders seeking a strong durable and lightweight wheelset for rugged road and gravel adventures will find this 650B/27.5 diameter wheel with wider rims a perfect choice. It makes no compromises on responsiveness durability and ease of use.The lightweight aluminum rims feature ISM4D technology which strategically removes material from the rim where it’s not needed but keeps it around the spokes where tension is applied. Double butted spokes further reduce weight and make the wheel feel more responsive. The spokes have an aero elliptical shape that can save 5 watts of energy while maintaining your speed. Super-wide rims (25mm internal) are compatible with tubeless tires up to 64mm to absorb road shocks and vibrations. You get 5cm of “tire travel” to cushion your ride and the smaller-diameter rims allow you to retain the agile handling you want with a drop-bar bike.Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed so no tape is required. No hassles no added weight. Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer and the Instant Drive 360 freewheel coupled with our automatic bearing preload adjustment (QRM Auto) provides fast engagement stiffness and added durability. The wheels use center lock brake rotors and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release. Key benefits Traction rolling efficiency and confidence on all types of terrain Wider 650B/27.5 rims let you run larger high-volume tires and still maintain the responsive handling of a normal road bike 5cm of plush “tire travel” improves traction and comfort prevents pinch flats and lets you dial in the perfect tire pressure for the terrain UST Tubeless compatibility for lower rolling resistance Superlight and durable ISM4D rim is only 440g Patented lightweight aero spokes Automatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durability Fore drilling doesn't require the use of rim tape - 30g saved per wheel Laterally stiff and vertically compliant for a dynamic ride quality Fore technology keeps the rim upper bridge solid to make the rim stiffer 17mm axle and new hub design ID360 freewheel technology is 12mm compatible convertible to quick release (15mm axle option through axle replacement) Rims Material: Maxtal Tire: UST Tubeless and tubetype Disc brake specific profile SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Internal width: 25 mm Hookless profile Height: 22 mm ETRTO size : 584x25TSS Spokes Count: 24 front and rear Nipples: Fore integrated aluminum Material: steel Shape: straight pull elliptical aero double butted (patented) Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Intended use Recommended tire sizes: 28 to 64 mm (11 to 25) ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 41bar/59PSI with a 28mm tyre - 245bar/36PSI with a 64mm tyre Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible Front: Quick release 12x100 and 15x100 through axle compatible QRM Auto bearing preload technology Infinity hubs Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Front axle: 12mm thru axle easily convertible to quick release with optional adapters Convertible to 15mm with complete axle replacement Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 15mm axle (V2373501) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) 15mm axle (LVXXXXXX) 12 to 9mm rear adapter for quick release (V2510801 (with axle V2373401) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
RockShox Boxxer Select RC Boost ForksThe RockShox Boxxer Select RC Boost Forks are superb forks that are designed for freeriders and downhill (DH) racers - they offer phenomenal shock absorption, stability and control on every run, over mixed terrains, anywhere on Earth.The Boxxer Select RC forks feature a tough aluminium upper tube construction which makes them perfect for withstanding all the abuse that comes with blasting across the trails. RockShox has used magnesium for the lower tubes, so you'll benefit from maximum stiffness without any excess weight holding you back.DebonAir Downhill Race ForksReady to set you soaring down the slopes, these brilliant forks are equipped with a DebonAir spring for a plush and predictable riding experience. You'll notice when weaving from trail to trail how the connection between your bike and ther terrain becomes seamless as the spring absorbs every little impact. What's most impressive is you won't have to worry about feeling any harsh jolts on your body thanks to how smooth and soft this model performs.Sag GradientsEasy to set up and maintain, RockShox has installed sag gradients which are printed on these fork's upper tubes. This makes it incredibly simple to set the suspension to suit your riding preferences. Instead of wasting time with plastic clips and rulers to keep your suspension fine-tuned, you can now spend more time shredding the trails thanks to this model's fast and flawless customisation capabilities.Saving every dime for your bike park pass? Keep it in the bank, BoXXer Select is built on the same great chassis as BoXXer Ultimate and features the DH-specific DebonAir air spring. Race-proven Maxima Plush damping fluid and the Charger RC damper offer out of the box performance with Low Speed Compression and rebound adjustment.Features: Steerer: 1-1/8" Aluminium Axle: 20x110mm Boost Wheel Size: 27.5" Travel: 200mm Spring: Debonair Damper: Charger RC damper featuring low-speed compression adjust Fork Offset: 46mm (27.5") Upper Tube Type: 35mm Straight Wall Aluminium Crown Type: Short Crown Max Tyre Width: 81mm Maximum Rotor Size: 220mm Minimum Rotor Size: 200mm E-bike Approved: Yes Updated Maxima Plush damping fluid reduces friction and silences damper noise Updated graphics Highly tuneable DH-specific DebonAir spring offers a coil-like consistent feel throughout the travel Weight: 2.55 kg Technologies:Bottomless Tokens: Bottomless Tokens allow you to easily custom tune your air-spring performance to best match your riding style and suspension preference. Adding the easy-to-install Bottomless Tokens changes the air-spring curve to resist bottom-out after a big hit, giving aggressive riders the power to attack the trail harder. Removing Bottomless Tokens makes the air-spring curve more linear, enhancing suspension feel for certain types of terrain or trail conditions and ensuring riders who are less front-end aggressive benefit from 100% of their fork’s travelDebonair: A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. Sag Gradients: Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won’t find this anywhere else but RockShoxBoost: BOOST is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with shorter chainstays, wider and stiffer suspension pivots, a wider range of chainring options, as well as more clearance for bigger tyres and wider, stiffer wheelsMaxima Plush Fluid: Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperaturesCharger RC Damper: Charger RC features an extruded bladder design that allows you to adjust low-speed compression anywhere from fully open to firmSKF Seals: Everyone loves a good collaboration, which is why RockShox has been working with SKF, the World's highest-performance seal manufacturer, for over 5 years. Together they provide ultra-low friction wiper seals, less fatigue, and unmatched suspension feel, all while keeping the dirt where it belongs- because no one wants dirt in thereBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DT Swiss GRC 1400 Spline 42 Front WheelReady for gravel racing, this front wheel offers brilliantly smooth rolling performance and control on your road bike adventures. It features a tough carbon construction, which means that you'll enjoy its fantastic stiffness without adding any unnecessary weight to your bike. DT Swiss has also given this version a stunning Waterslide decal finish, which makes it look as awesome as it performs. One final highlight is it's tubeless ready, so you can enjoy superior traction as well as its light weight on every adventure.Introducing the Gravel racing king - GRC 1400 SPLINE 42. The most sophisticated gravel wheel out there on the market. Taking a holistic approach to engineering, we rethought the characteristics of a modern benchmark-setting gravel wheel. Aerodynamic efficiency, ideal support of wide gravel tyres leading to unprecedented comfort and traction off- road as well as remarkable durability - these are just some of the key features that make this wheel the perfect companion for your next gravel adventure.Features: Rim Material: Carbon with Waterslide decal finish Use: Road, Gravel Brake Interface: Disc Center Lock Hub Type: 240, Freehub Body: Shim. RD. 11SP Light S ASLS11 Rim Type:: Clincher Nipples: DT Pro Lock hidden Aluminium Rim Height: 42mm Width: Inner: 24mm; Outer: 32mm Spokes: DT aero comp straightpull, 2-cross (1:1) Size: 12x100mm Weight: 650b: 717g; 750c: 861gTechnologies: 584 MM (27.5" / 650B) VERSION: Rim Diameter: 584mm (27.5" / 650B) Built-In Dimension: 100mm Net Weight: 717gInclusive: Tubeless tape 25mm, TL valve alu black 36-48mm, IS 6-bolt adapter Road, 5mm endcap Kit. 15mm endcap kit and valve guard 622 MM (29" / 700C) VERSION: Rim Diameter: 622 mm (29" / 700C) Built-In Dimension: 100mm Net Weight: 750gInclusive: Tubeless tape 25mm, TL valve alu black 36-48mm, IS 6-bolt adapter Road, 5mm endcap Kit. 15mm endcap kit and valve guardBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Diamond D1 Boost Fork 29" (44mm Offset)Made to help you to dominate every trail session and “own” the mountain, this daring Diamond D1 Boost Fork comes equipped with Boost-sizing and a robust aluminium construction for taking on enduro rides with fearlessness and control. Equipped with a huge 160mm of terrain-taming and impact-swallowing travel, this DVO 29er mountain bike (MTB) fork smooths out the harshest surfaces. Plus, its D1 damper offers you thirty clicks of high-speed compression adjustment, enabling you to carefully tune the fork to suit your riding style and how it reacts to the trail’s conditions.A High-Performance and Adjustable MTB Fork Kitted out with a closed bladder system and shim stack-controlled damping the Diamond D1 also features Off The Top (OTT) adjustments which help to improve sensitivity over small bumps and the feel of the stroke. A tapered steerer allows for precision handling when navigating trickier sections, while the Boost-sized axle gives a more rigid and responsive performance over gnarly runs with bigger wheels. This really is the perfect MTB fork for the daring enduro racer. Features: Stanchion Material: Aluminium, 35mm Crown Material: Forged Aluminium Lowers Material: Magnesium casting Steerer Tube Material: Aluminium Steerer Tube Size: 1 1/8 - 1.5", tapered Travel: 160mm Adjustable Travel: No Spring Type: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge D1 Damper system Adjustments: High-speed and low-speed compression, rebound speed, Of The Top (OTT), air pressure Axle Type: 15x110mm Boost thru-axle (thru-axle included) Use: All-Mountain (AM), Enduro Lockout: No Axle To Crown Length: 572mm (measurement at maximum travel) Offset: 44mm Disc Brake Caliper Mount: Post Mount Shim Stack Controlled Damping Wheel Size: 29" Hub Width Compatibility: 15x110mm (Boost) Weight: 2150g Technologies:Off The Top (OTT): DVO's industry exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stoke compromise. You really do get the best of both worldsBuy DVO Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Expert Suspension ForkThis enduro suspesnion fork features 37mm stanchions that are constructed from 7000 series aluminium and Reverse Arch technology, using the same chassis as Manitou's Mezzer Pro suspension fork. This allows it to deliver exceptional stiffness and strength, while also being incredibly lightweight at only 2030g (27.5” option). As a result, the Expert is the second lightest fork in the Enduro category, second only to the Mezzer Pro of course. Another highlight is it comes race-ready with an Expert Air air spring with Incremental Volume Adjust (IVA) for an impressively smooth feel as you charge across challenging terrain conditions. It also offers a wide range of adjustment features from its Variable Terrain Tune (VTT) damper that can easily be tweaked to suit any terrain thanks to its six positions. With adjustable Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock), this suspension fork is the smart choice for anyone looking to dive into the Enduro Fork market.Enduro Fork with Expert Air SpringExpert Air is derived from Manitou's Dorado Air system and features a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This valve is activated only when the pump is threaded completely onto the valve. This gives the spring rate a smooth and consistent feel without any flat or dead spots in the stroke.Six Position Variable Terrain Tune (VTT) DamperAdjusted through a single external compression adjuster, both high-speed and low-speed damping characteristics are changed simultaneously when turning the knob. The damper features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. In positions 1 and 2 there is an open flow path through the compression damper. In positions 3-6, the adjustable shim stack comes into contact with the piston, increasing platform force. This design provides a wide tuning range that combines the benefits of a low-speed platform and a high-speed progressive tune that can suit any terrain through 6 positions.Hexlock SL AxleManitou's patented hex axle locks the lower legs in place, eliminating rotation around the axle providing unsurpassed stiffness in a lightweight tooled package.Features: Leg Material: 7000 Series Butted Wall Aluminium Crown Material: Forged Aluminium, Hollow Bore Leg Diameter: 37mm Use: Enduro Axle Size: 15x110mm Hexlock Steerer Diameter: 1 1/8-1.5" tapered Air Spring: Expert Air with Incremental Volume Adjust (IVA) Compression Damping: Six Position Variable Terrain Tune Rebound Damping: Open Cartridge adjustable TPC Adjustments: Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock) Offset: 37/44OS (27.5" Option); 44/51OS (29" Option) Ride Height: 534-574mm (27.5" Option); 554-594mm (29" Option) Travel: Multiple options available. Internally adjustable in 10mm increments Brake Post Mount: 180mm (223mm Max) Max Tyre Size: 69mm with Fender 74mm Without Optional: Fender Kit (sold separately) E-Pac: Yes, 44OS 140-180 (27.5" Option); 51OS 140-160mm (29" Option) Weight: 2030g (27.5" Option); 2062g (29" Option)Technologies: 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness. Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self contained spacers. You'll never lose a volume spacer again. VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built up air within the lower legs to keep things butter smooth between service intervals.Manufacturer's Part Numbers: 191-36964-A101 Black 29" x 180mm 44mm 191-37137-A101 Black 27.5" x 180mm 37mm 191-36964-A103 Black 29" x 160mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Expert Suspension ForkThis enduro suspesnion fork features 37mm stanchions that are constructed from 7000 series aluminium and Reverse Arch technology, using the same chassis as Manitou's Mezzer Pro suspension fork. This allows it to deliver exceptional stiffness and strength, while also being incredibly lightweight at only 2030g (27.5” option). As a result, the Expert is the second lightest fork in the Enduro category, second only to the Mezzer Pro of course. Another highlight is it comes race-ready with an Expert Air air spring with Incremental Volume Adjust (IVA) for an impressively smooth feel as you charge across challenging terrain conditions. It also offers a wide range of adjustment features from its Variable Terrain Tune (VTT) damper that can easily be tweaked to suit any terrain thanks to its six positions. With adjustable Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock), this suspension fork is the smart choice for anyone looking to dive into the Enduro Fork market.Enduro Fork with Expert Air SpringExpert Air is derived from Manitou's Dorado Air system and features a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This valve is activated only when the pump is threaded completely onto the valve. This gives the spring rate a smooth and consistent feel without any flat or dead spots in the stroke.Six Position Variable Terrain Tune (VTT) DamperAdjusted through a single external compression adjuster, both high-speed and low-speed damping characteristics are changed simultaneously when turning the knob. The damper features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. In positions 1 and 2 there is an open flow path through the compression damper. In positions 3-6, the adjustable shim stack comes into contact with the piston, increasing platform force. This design provides a wide tuning range that combines the benefits of a low-speed platform and a high-speed progressive tune that can suit any terrain through 6 positions.Hexlock SL AxleManitou's patented hex axle locks the lower legs in place, eliminating rotation around the axle providing unsurpassed stiffness in a lightweight tooled package.Features: Leg Material: 7000 Series Butted Wall Aluminium Crown Material: Forged Aluminium, Hollow Bore Leg Diameter: 37mm Use: Enduro Axle Size: 15x110mm Hexlock Steerer Diameter: 1 1/8-1.5" tapered Air Spring: Expert Air with Incremental Volume Adjust (IVA) Compression Damping: Six Position Variable Terrain Tune Rebound Damping: Open Cartridge adjustable TPC Adjustments: Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock) Offset: 37/44OS (27.5" Option); 44/51OS (29" Option) Ride Height: 534-574mm (27.5" Option); 554-594mm (29" Option) Travel: Multiple options available. Internally adjustable in 10mm increments Brake Post Mount: 180mm (223mm Max) Max Tyre Size: 69mm with Fender 74mm Without Optional: Fender Kit (sold separately) E-Pac: Yes, 44OS 140-180 (27.5" Option); 51OS 140-160mm (29" Option) Weight: 2030g (27.5" Option); 2062g (29" Option)Technologies: 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness. Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self contained spacers. You'll never lose a volume spacer again. VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built up air within the lower legs to keep things butter smooth between service intervals.Manufacturer's Part Numbers: 191-36964-A101 Black 29" x 180mm 44mm 191-37137-A101 Black 27.5" x 180mm 37mm 191-36964-A103 Black 29" x 160mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.