Mudhugger Rear Gravel Hugger MudguardIdeal for gravel riding, wet weather cycling for blasting down muddy routes, the MudHugger Rear Gravel Hugger protects your back from rear wheel spray, gravel and grit.Secure, Strong and LightweightThe Rear GravelHugger is designed to be attached to the bike with zipties as these afford the most secure way to fitting. See fitting vid below, fitting the new GH is the same as the tried and tested MTB Rear Mudhugger. Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays (with angles approx 40-55 degrees) and designed for tyres up to 50mm wide. Helitape is supplied to protect the seat stays where the GravelHugger sits on the seat stays, ensure you use this tape, invisframe, electrical tape or similar are not sufficiently thick to protect your bikes paint and frame. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Weight: approx 150gBuy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The inner tube for gravel and endurance cycling, the perfect blend of compact dimensions, lightweight and the best puncture protection in the Pirelli range.Compatible with disc and rim brakesPresta valve700x28-35mm is reinforcedCinturato SmarTUBE is the cycling inner tube designed for gravel, adventure and endurance. The tube provides all the benefits of the innovative TPU (Thermoplastic Polyurethane) and thanks to a specific formulation delivers the best performances for those who are looking for superior puncture resistance with low weight and compact size. Cinturato SmarTUBE is a one-of-a-kind inner tube: reduced weight and compact with an unparalleled puncture protection when compared to standard butyl inner tubes. The ultimate solution for the cyclists that take on long travels and explore remote lands, the low weight and compact size are crucial when packing water, food and extra clothing.
The inner tube for gravel and endurance cycling, the perfect blend of compact dimensions, lightweight and the best puncture protection in the Pirelli range.Compatible with disc and rim brakesPresta valve700x28-35mm is reinforcedCinturato SmarTUBE is the cycling inner tube designed for gravel, adventure and endurance. The tube provides all the benefits of the innovative TPU (Thermoplastic Polyurethane) and thanks to a specific formulation delivers the best performances for those who are looking for superior puncture resistance with low weight and compact size. Cinturato SmarTUBE is a one-of-a-kind inner tube: reduced weight and compact with an unparalleled puncture protection when compared to standard butyl inner tubes. The ultimate solution for the cyclists that take on long travels and explore remote lands, the low weight and compact size are crucial when packing water, food and extra clothing.
The inner tube for gravel and endurance cycling, the perfect blend of compact dimensions, lightweight and the best puncture protection in the Pirelli range.Compatible with disc and rim brakesPresta valve700x28-35mm is reinforcedCinturato SmarTUBE is the cycling inner tube designed for gravel, adventure and endurance. The tube provides all the benefits of the innovative TPU (Thermoplastic Polyurethane) and thanks to a specific formulation delivers the best performances for those who are looking for superior puncture resistance with low weight and compact size. Cinturato SmarTUBE is a one-of-a-kind inner tube: reduced weight and compact with an unparalleled puncture protection when compared to standard butyl inner tubes. The ultimate solution for the cyclists that take on long travels and explore remote lands, the low weight and compact size are crucial when packing water, food and extra clothing.
When we ride our bikes into the sometimes harsh natural environment, we need extra protection. Santini’s long-finger MTB gloves come with a non-slip silicone print on the palm and fingertips, are made of abrasion-resistant fabric, and have a reflective Santini logo on the wrist for maximum visibility.
When we ride our bikes into the sometimes harsh natural environment, we need extra protection. Santini’s long-finger MTB gloves come with a non-slip silicone print on the palm and fingertips, are made of abrasion-resistant fabric, and have a reflective Santini logo on the wrist for maximum visibility.
When we ride our bikes into the sometimes harsh natural environment, we need extra protection. Santini’s long-finger MTB gloves come with a non-slip silicone print on the palm and fingertips, are made of abrasion-resistant fabric, and have a reflective Santini logo on the wrist for maximum visibility.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
When we ride our bikes into the sometimes harsh natural environment, we need extra protection. Santini’s long-finger MTB gloves come with a non-slip silicone print on the palm and fingertips, are made of abrasion-resistant fabric, and have a reflective Santini logo on the wrist for maximum visibility.
When we ride our bikes into the sometimes harsh natural environment, we need extra protection. Santini’s long-finger MTB gloves come with a non-slip silicone print on the palm and fingertips, are made of abrasion-resistant fabric, and have a reflective Santini logo on the wrist for maximum visibility.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.