Nukeproof Enduro StrapAs enduro riding becomes more challenging, so the need to carry spares securely and conveniently is vital. This durable and reliable strap by Nukeproof keeps your extra essentials firmly tethered to your bike instead of your back. Attaching your spares to your frame or saddle means you don't need to carry a bag or frees up or extra space in your bag for the likes of nutrition, gadgets and other must-haves. One strap will safely and comfortably hold a spare inner tube and two CO2 cannisters and is available in two lengths, 38cm for saddles and 60cm for frames.How to Use: 1. Get your spare tube and ensure that it is neatly folded. Gather any other accessories you want to carry (multi tool, CO2 etc) 2. Lay the strap flat, the side with the rubber grip area should be facing you 3. Place the inner tube on the strap and secure in place using the two loops 4. Turn the strap over 5. Get your accessories and push them between the strap & the tube 6. Take the loaded strap to your bike and set the rubber contact bars against the frame or saddle 7. Put the strap round the frame / saddle, though the loop and then back on itself, pull it tight and ensure the Velcro is securely in place 8. When mounting to your frame, ensure that the strap will not obstruct your shock or get in the way of other moving parts 9. On the 38cm strap there are extra Velcro securing tabs to go over the strap for added security, these can now be fastened 10. Go and enjoy your rideFeatures: Short: 38cm (For attaching to your saddle but can be used on frames with skinny tubing) Long: 60cm (For attaching to the frame but will also work on the saddle) Available in 6 Horizon ColourwaysBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Enduro StrapAs enduro riding becomes more challenging, so the need to carry spares securely and conveniently is vital. This durable and reliable strap by Nukeproof keeps your extra essentials firmly tethered to your bike instead of your back. Attaching your spares to your frame or saddle means you don't need to carry a bag or frees up or extra space in your bag for the likes of nutrition, gadgets and other must-haves. One strap will safely and comfortably hold a spare inner tube and two CO2 cannisters and is available in two lengths, 38cm for saddles and 60cm for frames.How to Use: 1. Get your spare tube and ensure that it is neatly folded. Gather any other accessories you want to carry (multi tool, CO2 etc) 2. Lay the strap flat, the side with the rubber grip area should be facing you 3. Place the inner tube on the strap and secure in place using the two loops 4. Turn the strap over 5. Get your accessories and push them between the strap & the tube 6. Take the loaded strap to your bike and set the rubber contact bars against the frame or saddle 7. Put the strap round the frame / saddle, though the loop and then back on itself, pull it tight and ensure the Velcro is securely in place 8. When mounting to your frame, ensure that the strap will not obstruct your shock or get in the way of other moving parts 9. On the 38cm strap there are extra Velcro securing tabs to go over the strap for added security, these can now be fastened 10. Go and enjoy your rideFeatures: Short: 38cm (For attaching to your saddle but can be used on frames with skinny tubing) Long: 60cm (For attaching to the frame but will also work on the saddle) Available in 6 Horizon ColourwaysBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Genuine replacement Vitus spare part for the carbon Vitus Rapide bike and frame.
This kit is a direct replacement for the guide found on the Vitus Rapide Carbon bike.
Nukeproof Horizon Bolted Accessory Frame StrapThe Horizon Bolted Accessory Strap from Nukeproof offers a unique, versatile and convenient on-bike cargo mounting storage solution. It's compatible with bike frames that feature accessory mounting holes and the Nukeproof 2021+ Mega and Giga have mounting holes under the top tube for secure, stylish and low-profile mounting.Bolted Accessory Strap for Secure and Stylish On Bike StorageGot a bike with mounting holes for an accessory plate or got a bottle cage mounting point not being used? This Nukeproof accessory set will be the perfect fit on your bike. The kit comes with an alloy back plate and 3 different lengths of strap allowing you to carry some spares on your ride. The longest strap allows an inner tube, 25g co2 cannister, small pump like LifeLine Hybrid CO2 Mini Pump - Mountain Bike (MTB) & Nukeproof tubeless repair kit For fitting instructions, please click HERE.Strap lengths: 50mm x 314mm 38mm x 265mm 38mm x 130mmOur shortest strap can also be used along with our Nukeproof Horizon carbon water bottle cage allowing you to carry a co2 cannister or small diameter pump. The 2021 Nukeproof Mega & Giga bikes all have mounting holes under the top tube making this kit fully compatible. Features: Back Plate Colours: Black, Red, Blue, Purple, Grey, Copper Strap Colour: Black Adjustment: The mounting plate allows for 20mm of adjustmentBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
RapidRacerProducts ProGuard Hook and Loop StrapsThe ProGuard Hook and Loop Straps from RapidRacerProducts are Hook and Loop straps to quickly attach and remove Proguard V2 mudguard to your bike. Features: Pack includes 8 hook and loop straps Compatible with Proguard V2 mudguards Buy RapidRacerProducts Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Genuine Vitus chainstay protector.
Vitus Chainstay Protector (2020-2021) The Vitus Chainstay Protector is compatible with all 2020-2021 29"-wheeled Vitus Nucleus, Sentier and Rapide models. Engineered to protect the frame's chainstay from chain slap, scuffs and bashes while also reducing noise as you ride over rough terrain.Features: Genuine Vitus Spare Parts High-Quality Vitus Chainstay Protector Compatibility: 2020-2021 Vitus Nucleus, Sentier and Rapide 29"Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Rapide Carbon Single Cable GuideThis Single Cable Guide is to replace the single cable guide and bolt on Vitus Rapide Carbon frames.Features: Kit Includes: 1x single cable guide onlyBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Rapide Carbon Double Cable GuideThis Double Cable Guide is to replace the double cable guide and bolt on Vitus Rapide Carbon frames.Features: Kit Includes: 1x double cable guide onlyBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Restrap Bike Frame Protection KitThe Bicycle Protection Kit from Restrap prevents abrasion, scrapes and rubbing from dirt, grit, cable rub and scrapes. It features three sets of custom cuts and easy to fit heavy-duty vinyl bike protection strips to cover and protect areas of your bike that are prone to cable-rub and general paint-wear.Heavy Duty Vinyl Frame Protection StripsVinyl pack to prevent abrasion against dirt, cables and bags. Featuring three sheets of custom cut easy-to-install heavy-duty vinyl, this kit provides a variety of shapes to cover and protect areas susceptible to abrasion on any bike. Easy to Apply Frame ProtectionEmbellished with a screen-printed design of the rugged contours of the Yorkshire Dales, the bicycle protection kit is sure to keep your ride looking fresh for many miles. Instructions: Clean and dry the surface of your bike frame. Apply vinyl to required areas. Apply some pressure evenly from the centre pushing outwards to ensure secure adhesion. Ride your bike!Features: 3x Heavy Duty Frame Protection Strips Vinyl frame protection Stylish screen-printed design Durable and rugged constructionBuy Restrap Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight