Genuine replacement Vitus spare part for the carbon Vitus Rapide bike and frame.
This kit is a direct replacement for the guide found on the Vitus Rapide Carbon bike.
Genuine Vitus chainstay protector.
The Vitus Rapide FS Upper Shock Bolt Kit contains all the spare parts required to replace the upper shock bolt hardware on all 2021 and 2022 Vitus Rapids FS frames.
Designed to fit any fork, RapidRacerProducts has developed the EnduroGuard to work effectively with short-travel XC and 4X forks (80mm to 120mm travel). The 'T' shape clamping points on the arms are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer increased protection for higher speeds without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The holes for the fork brace aren't ideally located when using it as a rear mudguard, so these guards have two snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays, this feature creates more mud / tyre clearance and a much better fit.
Vinyl pack to prevent abrasion against dirt, cables and bags. Featuring three sheets of custom cut easy-to-install heavy-duty vinyl, this kit provides a variety of shapes to cover and protect areas susceptible to abrasion on any bike. Embellished with a screen-printed design of the rugged contours of the Yorkshire Dales, the bicycle protection kit is sure to keep your ride looking fresh for many miles. Instructions: Clean and dry the surface of your bike frame. Apply vinyl to required areas. Apply some pressure evenly from the centre pushing outwards to ensure secure adhesion. Ride your bike!
The ProGuard Hook and Loop Straps from RapidRacerProducts are Hook and Loop straps to quickly attach and remove Proguard V2 mudguard to your bike.
Nukeproof Enduro StrapAs enduro riding becomes more challenging, so the need to carry spares securely and conveniently is vital. This durable and reliable strap by Nukeproof keeps your extra essentials firmly tethered to your bike instead of your back. Attaching your spares to your frame or saddle means you don't need to carry a bag or frees up or extra space in your bag for the likes of nutrition, gadgets and other must-haves. One strap will safely and comfortably hold a spare inner tube and two CO2 cannisters and is available in two lengths, 38cm for saddles and 60cm for frames.How to Use: 1. Get your spare tube and ensure that it is neatly folded. Gather any other accessories you want to carry (multi tool, CO2 etc) 2. Lay the strap flat, the side with the rubber grip area should be facing you 3. Place the inner tube on the strap and secure in place using the two loops 4. Turn the strap over 5. Get your accessories and push them between the strap & the tube 6. Take the loaded strap to your bike and set the rubber contact bars against the frame or saddle 7. Put the strap round the frame / saddle, though the loop and then back on itself, pull it tight and ensure the Velcro is securely in place 8. When mounting to your frame, ensure that the strap will not obstruct your shock or get in the way of other moving parts 9. On the 38cm strap there are extra Velcro securing tabs to go over the strap for added security, these can now be fastened 10. Go and enjoy your rideFeatures: Short: 38cm (For attaching to your saddle but can be used on frames with skinny tubing) Long: 60cm (For attaching to the frame but will also work on the saddle) Available in 6 Horizon ColourwaysBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Enduro StrapAs enduro riding becomes more challenging, so the need to carry spares securely and conveniently is vital. This durable and reliable strap by Nukeproof keeps your extra essentials firmly tethered to your bike instead of your back. Attaching your spares to your frame or saddle means you don't need to carry a bag or frees up or extra space in your bag for the likes of nutrition, gadgets and other must-haves. One strap will safely and comfortably hold a spare inner tube and two CO2 cannisters and is available in two lengths, 38cm for saddles and 60cm for frames.How to Use: 1. Get your spare tube and ensure that it is neatly folded. Gather any other accessories you want to carry (multi tool, CO2 etc) 2. Lay the strap flat, the side with the rubber grip area should be facing you 3. Place the inner tube on the strap and secure in place using the two loops 4. Turn the strap over 5. Get your accessories and push them between the strap & the tube 6. Take the loaded strap to your bike and set the rubber contact bars against the frame or saddle 7. Put the strap round the frame / saddle, though the loop and then back on itself, pull it tight and ensure the Velcro is securely in place 8. When mounting to your frame, ensure that the strap will not obstruct your shock or get in the way of other moving parts 9. On the 38cm strap there are extra Velcro securing tabs to go over the strap for added security, these can now be fastened 10. Go and enjoy your rideFeatures: Short: 38cm (For attaching to your saddle but can be used on frames with skinny tubing) Long: 60cm (For attaching to the frame but will also work on the saddle) Available in 6 Horizon ColourwaysBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Enduro StrapAs enduro riding becomes more challenging, so the need to carry spares securely and conveniently is vital. This durable and reliable strap by Nukeproof keeps your extra essentials firmly tethered to your bike instead of your back. Attaching your spares to your frame or saddle means you don't need to carry a bag or frees up or extra space in your bag for the likes of nutrition, gadgets and other must-haves. One strap will safely and comfortably hold a spare inner tube and two CO2 cannisters and is available in two lengths, 38cm for saddles and 60cm for frames.How to Use: 1. Get your spare tube and ensure that it is neatly folded. Gather any other accessories you want to carry (multi tool, CO2 etc) 2. Lay the strap flat, the side with the rubber grip area should be facing you 3. Place the inner tube on the strap and secure in place using the two loops 4. Turn the strap over 5. Get your accessories and push them between the strap & the tube 6. Take the loaded strap to your bike and set the rubber contact bars against the frame or saddle 7. Put the strap round the frame / saddle, though the loop and then back on itself, pull it tight and ensure the Velcro is securely in place 8. When mounting to your frame, ensure that the strap will not obstruct your shock or get in the way of other moving parts 9. On the 38cm strap there are extra Velcro securing tabs to go over the strap for added security, these can now be fastened 10. Go and enjoy your rideFeatures: Short: 38cm (For attaching to your saddle but can be used on frames with skinny tubing) Long: 60cm (For attaching to the frame but will also work on the saddle) Available in 6 Horizon ColourwaysBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Enduro StrapAs enduro riding becomes more challenging, so the need to carry spares securely and conveniently is vital. This durable and reliable strap by Nukeproof keeps your extra essentials firmly tethered to your bike instead of your back. Attaching your spares to your frame or saddle means you don't need to carry a bag or frees up or extra space in your bag for the likes of nutrition, gadgets and other must-haves. One strap will safely and comfortably hold a spare inner tube and two CO2 cannisters and is available in two lengths, 38cm for saddles and 60cm for frames.How to Use: 1. Get your spare tube and ensure that it is neatly folded. Gather any other accessories you want to carry (multi tool, CO2 etc) 2. Lay the strap flat, the side with the rubber grip area should be facing you 3. Place the inner tube on the strap and secure in place using the two loops 4. Turn the strap over 5. Get your accessories and push them between the strap & the tube 6. Take the loaded strap to your bike and set the rubber contact bars against the frame or saddle 7. Put the strap round the frame / saddle, though the loop and then back on itself, pull it tight and ensure the Velcro is securely in place 8. When mounting to your frame, ensure that the strap will not obstruct your shock or get in the way of other moving parts 9. On the 38cm strap there are extra Velcro securing tabs to go over the strap for added security, these can now be fastened 10. Go and enjoy your rideFeatures: Short: 38cm (For attaching to your saddle but can be used on frames with skinny tubing) Long: 60cm (For attaching to the frame but will also work on the saddle) Available in 6 Horizon ColourwaysBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Enduro StrapAs enduro riding becomes more challenging, so the need to carry spares securely and conveniently is vital. This durable and reliable strap by Nukeproof keeps your extra essentials firmly tethered to your bike instead of your back. Attaching your spares to your frame or saddle means you don't need to carry a bag or frees up or extra space in your bag for the likes of nutrition, gadgets and other must-haves. One strap will safely and comfortably hold a spare inner tube and two CO2 cannisters and is available in two lengths, 38cm for saddles and 60cm for frames.How to Use: 1. Get your spare tube and ensure that it is neatly folded. Gather any other accessories you want to carry (multi tool, CO2 etc) 2. Lay the strap flat, the side with the rubber grip area should be facing you 3. Place the inner tube on the strap and secure in place using the two loops 4. Turn the strap over 5. Get your accessories and push them between the strap & the tube 6. Take the loaded strap to your bike and set the rubber contact bars against the frame or saddle 7. Put the strap round the frame / saddle, though the loop and then back on itself, pull it tight and ensure the Velcro is securely in place 8. When mounting to your frame, ensure that the strap will not obstruct your shock or get in the way of other moving parts 9. On the 38cm strap there are extra Velcro securing tabs to go over the strap for added security, these can now be fastened 10. Go and enjoy your rideFeatures: Short: 38cm (For attaching to your saddle but can be used on frames with skinny tubing) Long: 60cm (For attaching to the frame but will also work on the saddle) Available in 6 Horizon ColourwaysBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.