Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Disc Brake Caliper Alignment ToolLifeLine's disc brakes caliper alignment tool enables you to get optimum disc brake performance and equal brake pad spacing while reducing pad rubbing and brake squeal. This easy to use tool sets the correct clearance so that both brake pads connect with the rotor at the same time when you're applying pressure to the brake lever. Providing more efficient braking power and a greater pad-life, this essential maintenance tool should be in every disc brake user's toolbox.Follow the simple steps below: Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side Insert the Caliper Alignment Tool between the pads and the rotor Pull the brake lever, forcing the pads against the alignment tool and against the rotor While still holding on to the brake lever, tighten the bolts on the brake caliper Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either sideFeatures: Size: 15cm x 3.5cm Blade Length: 13cm Weight: 33gBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lifeline Disc Brake Rotor Wear IndicatorThe Lifeline Disc Brake Rotor Wear Indicator is a convenient, easy to use and essential maintenance tool that enables you to keep your disc brake performance as good as it can be. Simply find the relevant slot that matches the brand of rotor you're riding with. If the rotor slides into the slot, then it's worn and needs replacing. If the rotor doesn't fit in the slot, then you've still got enough material on the rotor to ensure effective braking.The tool has been precisely machined to ensure you get accurate results.Compatibility: The 2mm slot minimum thickness is a gauge for Tektro and TRP Ebike rotors. The 1.8mm slot minimum thickness is a gauge for Magura rotors. The 1.55mm slot minimum thickness is a gauge for SRAM rotors. The 1.5mm slot minimum thickness is a gauge for Shimano and Hope rotors.Features: Precise CNC Machining Tool Dimensions: 100mm x 28mm x 10mm Each gauge is 15mm deep Weight: 74gBuy Lifeline Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Hydraulic Disc Brake Hose CutterThe Hydraulic Disc Brake Hose Cutter from LifeLine is ideal for getting a clean cut on your hydraulic disc brake hoses when shortening hose-length or when carrying out essential brake maintenance.High-Quality Disc Brake Hose CutterThis genuine LifeLine workshop-quality hose cutter features a spring-loaded mechanism and a lock for a combination of comfortable ergonomics and safety when not in use. Features: Reliable set of hydraulic hose cutters Ensures a nice clean cut Spring-loaded with lockBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Hydraulic Brake Piston Press PP-1.2Repair your hydraulic disc brake faster and with ease thanks to this Piston Press from Park Tool. This wedge can be inserted into a hydraulic disc brake caliper so you can pre-set the piston when performing component maintenance.The Park Tool PP-1 slides between the brake pads inside a caliper allowing the user to spread the pads and compress the pistons when servicing pads or wheels. The PP-1 expands the gap between the pads, making it easy to insert the disc between the pads when re-installing a caliper or wheel. "Sure-Grip" dual-density handle provides a positive grip.Features:Makes hydraulic disc brake maintenance and repair faster and easierForged steel construction with a plated finishComfortable rubber grip handleBuy Park Tool PP1 Brake Piston Press from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Brake Piston Press Brake piston press designed to easily push the brake pads apart to speed-up service and pad replacement. LifeLine Pro Brake Piston Press Features: Strong alloy construction. Ergonomic handle. Wedge shape helps push back pistons. Buy LifeLine Pro Brake Piston Press from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tektro Seat Clamp Brake-Gear Cable HangerKeeping your brake and gear cables tidy and out of the way, this handy hanger attaches to your seatpost, giving a convenient and compact hold. Features: Material: Forged Aluminium, Black Anodised Suitable for brake or gear cablesBuy Tektro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tektro Seat Clamp Brake-Gear Cable HangerKeeping your brake and gear cables tidy and out of the way, this handy hanger attaches to your seatpost, giving a convenient and compact hold. Features: Material: Forged Aluminium, Black Anodised Suitable for brake or gear cablesBuy Tektro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
microSHIFT Advent M090 1x9 Speed Gear-Brake LeversThe Advent M090 1x9 Dual Control Lever Set is ideal for bikepacking, trail riding and epic trekking adventures. Engineered for use with an Advent 1x9-Speed groupset, this lever set from microSHIFT is perfect for use with a wide-ranging 9-Speed cassette and features short pull brake cable actuation.Wide-Ranging 1x9-Speed Lever Set for Mountain and Adventure BikesFor adventures that need drop bars and wide gear ranges, Advent 1x9 drop bar shifters are just the ticket. Compatible with Advent rear derailleurs and 9-Speed 11-42T cassettes, these shifters offer all the advantages of a bombproof 9-Speed setup combined with modernized gear range to help you ride everywhere you want.Key Features: External shifter cable routing, internal brake routing Left side brake only for Advent 1x9-Speed setups Shifter levers are separated from brake lever to avoid accidental braking Crisp and positive shifting action Compatible with Advent derailleurs onlyFeatures: Series: Advent Model No.: SB-M090 Shifter Style: Integrated Drop Bar Side: Pair Speed: 1x9-Speed Gear Indicator: No Compatibility: microSHIFT Advent only Brake Actuation: Short Pull Lever Material: Forged AluminiumBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
microSHIFT Advent M090 1x9 Speed Gear-Brake LeverThe Advent M090 1x9 Speed Dual Control Lever is a sold as a single drop bar lever that features one shift paddle that's intended for use with cable actuated dropper seat posts. Ideal for adventure cycling, bike packing adventures and epic trekking expeditions, this lever gives you easy and dependable control of your sitting position.Drop Bar Lever with Integrated Dropper Seatpost ActuationYou shouldn't have to choose between drop bars and a dropper post. The Advent dropper remote is perfect for adventures that need both. Packaged as a single drop bar shift lever with only one paddle, the Advent dropper remote is compatible with droppers that route the cable from the shifter to the post (KS, Trans-X, etc.).Key Features: External dropper cable routing, internal brake routing Matches aesthetics of Advent 9 speed drop bar shiftersFeatures: Series: Advent Model No.: SB-M090-LD Shifter Style: Integrated Drop Bar Side: Left Speed: Brake & Dropper Actuation Gear Indicator: No Compatibility: Cable Head at the Remote Lever Material: Forged Aluminium Brake Actuation: Short PullBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
microSHIFT Advent M090 1x9 Speed Gear-Brake LeverThe Advent M090 1x9 Speed Dual Control Lever is a sold as a single drop bar lever that features one shift paddle that's intended for use with cable actuated dropper seat posts. Ideal for adventure cycling, bike packing adventures and epic trekking expeditions, this lever gives you easy and dependable control of your sitting position.Drop Bar Lever with Integrated Dropper Seatpost ActuationYou shouldn't have to choose between drop bars and a dropper post. The Advent dropper remote is perfect for adventures that need both. Packaged as a single drop bar shift lever with only one paddle, the Advent dropper remote is compatible with droppers that route the cable from the shifter to the post (KS, Trans-X, etc.).Key Features: External dropper cable routing, internal brake routing Matches aesthetics of Advent 9 speed drop bar shiftersFeatures: Series: Advent Model No.: SB-M090-LD Shifter Style: Integrated Drop Bar Side: Left Speed: Brake & Dropper Actuation Gear Indicator: No Compatibility: Cable Head at the Remote Lever Material: Forged Aluminium Brake Actuation: Short PullBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
microSHIFT Advent X M100A Gear-Brake LeversThe Advent X M100A Dual Control Lever Set is a drop bar brake lever/shifter set that's compatible with the Advent X mountain bike (MTB) rear derailleur. This lever set is ideal for use with adventure bikes when using an Advent X 1x10 groupset and a wide-ranging 10-Speed cassette.Pair these integrated drop bar shifters with an ADVENT X rear derailleur and cassette for a 1x setup with unparalleled range.Key Features: External shifter cable routing, internal brake routing Left side brake only for 1×10 setups Shifter levers are separated from brake lever to avoid accidental braking Crisp and positive shifting action Road brake cable pull Compatible with Advent X derailleurs onlyFeatures: Series: Advent X Model No.: SB-M100A Shifter Style: Integrated Drop Bar Side: Pair Speed: 1 x 10 Gear Indicator: No Compatibility: microSHIFT Advent X Only Brake Actuation: Short Pull Lever Material: Forged AluminiumBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.