Their compound is durable, noise-free and suitable for all riding types and conditions. Click HERE for LifeLine Brake Pad Compatibility chart. Compatible with: - Avid Trail and Avid Guide Series brakes
See the compatability chart in the images for specific brake caliper and lever fitment. The kit includes 8 nipple adaptors. Each nipple adaptor is specific to the brake caliper and lever and so please refer to the chart to check the required fitment. Compatatiblity has been checked and confirmed with the following brakes: Avid Code/ XO SRAM Guide Series/ Level Shimano Formula R1, C1,TheOne Hope X2/ E4 & V4 Magura MT Series (2,4,5,6,7,8)/ Louise Hayes El Camino/ Stroker Ryde/ Sole At the moment the kit is not compatible with TRP Quadium, TRP Slate, Formula Cura and Hayes Dominion A2/ A4. Please note: For the newer models of SRAM brakes with a Bleeding Edge port you will also require the LifeLine SRAM Bleeding Edge Brake Bleed Adaptor
You simply clamp the hydraulic hose in place and then drive the barb into place with this Pro Hydraulic Hose Needle Driver.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.
Restore your brakes to new condition with LifeLine Essential cablesets. As your cables corrode and wear, they can become stiff, gritty and less powerful. With corrosion resistant 19-strand stainless steel inners, precision brass ferrules, 3-core lined outer housing and cable O-rings, LifeLine Essential Cablesets provide a smooth, responsive action to help you get the best from your brakes. Tools Needed for InstallationCable cutters & crimps5/6mm Allen keys (for most Road/MTB brake sets)T25 Torx (Campagnolo® newer Record® & Super Record® calliper brakes)9mm spanner (some older pre-1980’s Road & MTB brakes)Depending on your brake configuration, consult your lever and brake manufacturer’s guidelines for correct fitting of cables, tools needed, and required torque settings specific to your particular braking system.
Refresh your cables for a smooth, effective braking experience. As your cables corrode and wear, they can become stiff, gritty and less powerful. With a flexible, corrosion resistant 19-strand stainless steel construction, LifeLine Essential cable inners provide a fast, responsive action to help you get the best from your brakes. The single anchor eliminates the need for cutting prior to installation; this greatly reduces the chance of the cable fraying and makes installation quick and simple. Tools Needed for InstallationCable cutters & crimps5/6mm Allen keysDepending on your brake configuration, consult your lever and brake manufacturer’s guidelines for correct fitting of cables, tools needed, and required torque settings specific to your particular braking system.
Simply find the relevant slot that matches the brand of rotor you're riding with. If the rotor slides into the slot, then it's worn and needs replacing. If the rotor doesn't fit in the slot, then you've still got enough material on the rotor to ensure effective braking. The tool has been precisely machined to ensure you get accurate results. The 2mm slot minimum thickness is a gauge for Tektro and TRP Ebike rotors. The 1.8mm slot minimum thickness is a gauge for Magura rotors. The 1.55mm slot minimum thickness is a gauge for SRAM rotors. The 1.5mm slot minimum thickness is a gauge for Shimano and Hope rotors.
Like all LifeLine products, this set has been developed and tested to meet the highest standards. Using the leading factories to give you proven products.
Get the very best from your brakes with LifeLine Performance cablesets; everything you need for renewed power and premium feel. 31 Strand Superior Shine Inner Cables LifeLine performance inner cables are wound from 31 ultra thin stainless steel filaments for a high tensile strength, corrosion resistance and outstanding flexibility. After the cables are wound, the outer surface is machined into a smooth, high-shine finish; this greatly minimises friction without the need for additional lubricant or treatment, giving you a light and smooth action that lasts. The single anchor eliminates the need for cutting prior to installation; this greatly reduces the chance of the cable fraying and makes installation quick and simple. Compressionless Stainless Braided Outer Cable Housing LifeLine performance outer cable housing features a four layer construction:Outer Jacket for all weather protectionStainless Steel Braided Mesh reinforcementStrand wire to prevent kinks and maintain the profilePU lining for a smooth, low friction interface with the inner cable Sealed CNC Machined Ferrules LifeLine performance sealed ferrules provide a solid junction with your framestops, shifters and derailleurs. A precision seal minimises moisture and dirt ingress, helping your cables perform like new for longer. Tools Needed for InstallationCable cutters & crimps5/6mm Allen keys (for most Road/MTB brake sets)9mm spanner (some older pre-1980’s Road & MTB brakes)Depending on your brake configuration, consult your lever and brake manufacturer’s guidelines for correct fitting of cables, tools needed, and required torque settings specific to your particular braking system.
A set of four high quality brake pads for use with V brakes. The Dual compound has been specifically formulated for consistent and reliable braking on alloy rim surfaces.
The LifeLine Shimano XT- XTR Disc Brake Pads ensure consistent braking performance and a stopping power, so you can focus on the ride no matter how challenging the terrain or conditions become. Click HERE for the LifeLine Brake Pad Compatibility Chart. Compatible with: - Shimano M615, M666, M675, M785, M985, M987, M988, M6000, M7000, M8000, M9000, M9020, R315, R515, R785, RS785, S700 - FSA K-Force DB-XC9000, Afterburner DB-XC-9150
Click HERE for the LifeLine brake pad compatibility chart. Compatible with: - Avid Elixir 1, 3, 5, 7, R, CR - Avid DB Series - SRAM XX, XO - Trickstuff CLEG 2