Wheels Manufacturing Emergency derailleur hanger for all bikes with quick release rear wheelsAn essential emergency hanger that allows one to get home by re-attaching the rear derailleur in the event of a failureAttaches to any dropout and held in place by the quick release skewerAllows access to about half of your bikes shifting rangeHigh quality CNC machined aluminiumBlack anodised for resistance to damageCan be easily reused
Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performanceCNC machined from solid 6061 aluminium to exact tolerancesStiffer than any original equipment hanger whichimproves shifting performanceStill breaks before your frame does to perform its main functionAll hangers come with instructions and hardwareDirect replacement for original equipment with guaranteed fitBlack anodised for extra scratch and damage resistanceLaser etched for easy part identification.
Key Features:Upgrade or replacement rear derailleur dropouts; stiffer and more rigid to improve shifting performance,CNC machined from solid 6061 aluminium to exact tolerances,Stiffer than any original equipment hanger which improves shifting performance,Still breaks before your frame does to perform its main function,All hangers come with instructions and hardware,Direct replacement for original equipment with guaranteed fit,Black anodised for extra scratch and damage resistance,Laser etched for easy part identification.
This Shimano adaptor is perfect for riders who want to convert their drop bar set up to 1x. It works by amplifying your road shifter cable pull, giving you the potential to run a mountain bike rear derailleur. If you’re looking to run a single chainring up front but with the gear range of a double – or want to retain a double and run super-low gears for ultra-steep hill mountain climbs, this is the upgrade for you. Easily installed in minutes and simply tucking above your rear derailleur, the Tanpan can be adjusted with its indexed barrel. Compatibility Compatible with a wide range of road, gravel and cyclocross bikes. If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster.
Wolf Tooth 10 Speed GoatLink Derailleur HangerIf you want to add extra capacity to your Shimano Shadow+ rear mechanism for the ultimate 1x10 speed setup, the Goatlink adaptor is for you. With this carefully machined component installed on your Shimano-equipped mountain bike (MTB), you’ll enjoy better shifting performance and be able to run Wolf Tooth’s Giant Cog (GC) cassette expanders and other brands of larger cassettes.The GoatLink is simply the fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains using the Shimano Shadow+ Rear derailleurs. Made by Lindarets and Wolf Tooth, it re-positions 10-speed Shimano Shadow+ Rear derailleurs to the optimal location when using the GC 40 tooth and GC 42 tooth sprockets.Features: Material: 6061 Aluminium Compatibility: Shimano Shadow+ 10-Speed rear derailleurs (clutch-type only) Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10-Speed Optimised for Wolf Tooth's 40 and 42-tooth GCs and all sizes of Drop-Stop chainrings - but will work with any 11-40T or 11-42T 10-Speed cassette You will never need a longer b-screw with the GoatLink Made in the USA Direct Mount-native frames and SRAM rear derailleurs are not supported Part Numbers: WT10SGLINK Weight: 19g Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Please Also Note: Compatible Shimano Shadow+ 10-speed rear derailleurs (clutch-type only) that have a Direct Mount link (including spacer, if so equipped) or B-pivot knuckle with a thickness of 7.9-8.1mm. Shimano changed to this sometime in 2013. Very early Shadow+ rear derailleurs have a thinner link and are not compatible. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 11 Speed GoatLink Derailleur HangerIf you want better shifting performance when running larger cassettes with your Shimano SLX, XT OR XTR 11 speed rear derailleur, then the GoatLink Derailleur Hanger from Wolf Tooth is for you. An ideal addition to your 1x11 drivetrain, it will help your mountain bike (MTB) to deliver the clean shifting and power delivery you need for taking on the most technical sections of the trails.This project began with the desire to run 11 Speed Shimano derailleurs and shifters with SRAM 10-42T XD cassettes. Granted the combination can work without modification - but the performance wasn't quite what Wolf Tooth expected from Shimano and SRAM's finest.When used with a 10-42T cassette, the GoatLink 11 re-positions SLX M7000, XT M8000 and XTR M9000 rear derailleurs such that free chain length between the cassette and the top derailleur pulley is within 1% of what Shimano intended while cassette tooth engagement in the smallest cog is improved by 27%.*Knowing that certain situations call for a range beyond that provided 10-42T or 11-42T cassettes, Wolf Tooth tweaked the GoatLink 11 to also significantly improve Shimano 11 speed rear derailleur performance with extended-range like the Wolf Tooth GCX44 modified 10-44T XX1 or X01 cassette.Features:Material: 6061 AluminiumCompatibility: SLX M700, XT M8000 and XTR M9000 series 11-Speed Shimano rear derailleursSpeed: 11-SpeedIncluded: Stainless Steel boltTorque: 8-10NmMade in the USAOnly mounts to standard derailleur hangersDouble chainrings (2x) are supported and require a long cage (SGS) rear derailleur with no more than a 12T difference in front chainrings (with an 11-46T cassette)Triple chainrings are not supportedDirect Mount native frames and SRAM derailleurs are not supportedManufacturer's Part Number: WT11S44GLINKWeight: 19g*Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Roadlink Derailleur HangerCreated by Wolftooth to increase the gearing capacity of your road or gravel bike, the Roadlink Derailleur Hanger changes the position of your rear mechanism so it can work with larger mountain bike (MTB) cassettes. An ideal component for changing to a 1x drivetrain, it works with Shimano 10 and 11 speed derailleurs.If you're looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you. The RoadLink is optimised for use with 10 or 11 speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth's 40-tooth GC cassette extenders and Drop-Stop chainrings. The RoadLink specifically designed for the 10 and 11 speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups and Campagnolo derailleurs with cassettes up to 11-36T.Features: Material: 6061 Aluminium Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10 and 11-Speed Use: Road, Gravel, cyclocross (CX) Direct Mount-native frames are not supported Triple chainrings are not supported Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded Made in the USA Manufacturer's Part Number: WTRLINK Weight: 17g10-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainrings sure to not exceed the derailleur's capacity) 11-42T: Not supported11-Speed Cassette Compatibility: 11-32T: Not Required (GS medium cage rear derailleur works) 11-34T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-36T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-40T: Single (for double chainring be sure to not exceed the derailleur's capacity) 11-42T: Not supported 10-42T: Not supportedPlease Note: Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use. Please Also Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment and suspension configuration, individual results will vary. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Direct Mount Roadlink Derailleur HangerEnabling you to run larger range cassettes on your road or gravel bike, this direct mount (DM) version of Wolf Tooth's RoadLink Derailleur Hanger extension works with a wide range of Shimano 11 speed rear mechanisms. It’s the ideal adaptor for changing the gearing on your bike to a 1x11 speed drivetrain setup.This gear hanger extension fits Shimano’s GRX 810 (RX810), R7000 105, R8000 and RX800 Ultegra and R9100 Dura-Ace rear derailleurs. Since it was first introduced, this award-winning model has given riders the ability to easily increase the range of their Shimano road bike drivetrains, while also maintaining near-factory levels of chain wrap and shifting operation.Like the mountain-focused GoatLink, the RoadLink DM replaces Shimano’s stock direct mount link allowing you to relocate the derailleur to provide clearance for larger-than-stock range cassettes while maintaining chain wrap and improving shifting. The result - larger gear ranges that riders want and expect for their road, commuter, gravel and touring bicycles.Features:Material: CNC machined from 6061-T6 Aluminium with stainless steel boltMount: Direct mountCompatibility: Shimano GRX 810 (RX810), 105 R7000, Ultegra R8000 and RX800 and Dura-Ace R9100 rear derailleursFits standard derailleur hangers onlyOptimised for use with 11-36T, 11-40T, and 11-42T 11-Speed cassettesOptimised for use with GRX ultra-wide range drivetrains when using the GRX 810 (RX810) rear derailleurImproves performance with 10-42T 11-Speed cassettes, but not to factory levelsDoes not change the derailleurs total chain wrap capacityMade in the USAManufacturer’s Part Number: WTROADLINK-DMWeight: 20gPlease Note: Direct mount derailleur hangers are not supported. These are not common and the stock B-Link that the RoadLink DM replaces will not be present on bikes with a direct mount derailleur hanger.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring an E25 compatible design, this E-MTB orientated tyre is engineered to withstand the additional weight and forces of modern electric mountain bikes. WTB has constructed this model with additional material to not only strengthen the tyre and prevent punctures but also to provide additional support throughout the tyre. Benefitting from a high-quality TriTec compound, it uses its three compounds to ensure maximum levels of grip, support and cornering traction. Another highlight is its TCS Tough/Fast Rolling configuration that boasts long-wearing rubber laid across two full layers of casing to leave no area unprotected. Developed through real testing during the Enduro World Series, this TCS Tough tyre can take some serious abuse. E-MTB Tyre with TCS Tubeless Technology It’s a tall order to improve the tried-and-true Trail Boss tyre, but WTB promise that’s exactly what they've done. The updated Trail Boss builds on perfection with a more aggressive tread pattern to match its increased volume. Generous spacing between sizable knobs provides better traction in loose or wet conditions, while staying true to its fleet-footed heritage. Large, supportive side knobs dig deep, whether you’re leaning into a corner or grabbing a handful of brake. Most often used as a rear tyre, the Trail Boss G2 also provides plentiful traction on hardpack trails when used on the front. Developed to meet the demands of modern electric mountain bike riders, this version comes complete with WTB's prestigious Tubeless Compatible System (TCS) technology. This means that you'll enjoy tubeless advantages such as the ability to run lower tyre pressures for increased stability on rough terrain, lower rolling resistance as well as fewer chances of flats or punctures. Technologies: TriTec Compound: Three compounds provide optimal levels of traction, support and durability. A base of high durometer rubber supports the entire tread and transitions into the knobs to prevent folding or squirming. Medium stiffness centre knobs cap the base layer to provide traction and durability without sacrificing rolling efficiency, while soft compound side knobs deliver maximum grip and slow rebound for increased cornering traction. TCS Tough/Fast Rolling: Long-wearing rubber laid across two full layers of casing leaves no area unprotected. Developed through real testing during the Enduro World series, TCS Tough tyres can take some serious abuse. E25 Compatible: Tyres with an E25 icon on the sidewall are designed to withstand the additional weight and forces of modern e-bikes. E25 tyres are constructed with additional material to not only strengthen the tyre and prevent punctures but also provide additional support throughout the tyre. Tubeless Compatible System (TCS): TCS is WTB's standardised tubeless rim/tyre system designed to meet international ETRTO standards and provide the most reliable tubeless system available. Pairing WTB’s legendary casings and tread compounds with a Tubeless Folding bead delivers the increased traction and reliability of a tubeless tyre at a lower weight than any tubed alternative. Manufacturer's Part Numbers: W010-0891 Black 27.5" 2.4" W010-0894 Black 29" 2.4" W010-0896 Black 27.5" 2.6" W010-0898 Black 29" 2.6"
This mountain bike (MTB) tyre comes equipped with WTB's TriTec compound, which uses its three compounds to deliver maximum grip and traction as you charge from trail to trail. Benefitting from a TCS Light/Fast Rolling configuration, its fast and efficient centreline tread compound matched to sticky, low durometer side knobs coat a supple, gram-conscious casing designed to be compliant while still trail-worthy. This model also boasts SG2 puncture protection, which defends all surfaces of the tyre by providing an uninterrupted layer of protection from bead to bead. As a result, it's more than capable of handling all the demands associated with all-day epics on the trails. One final highlight is its Tubeless Compatible System (TCS) technology with tubeless advantages such as the ability to run lower tyre pressures for increased stability, lower rolling resistance and less risk of flats or punctures. Trail-Ready MTB Tyre with SG2 Puncture Protection It’s a tall order to improve the tried-and-true Trail Boss tyre, but WTB promise that’s exactly what they've done. The updated Trail Boss builds on perfection with a more aggressive tread pattern to match its increased volume. Generous spacing between sizable knobs provides better traction in loose or wet conditions, while staying true to its fleet-footed heritage. Large, supportive side knobs dig deep, whether you’re leaning into a corner or grabbing a handful of brake. Most often used as a rear tyre, the Trail Boss G2 also provides plentiful traction on hardpack trails when used on the front. Technologies: TriTec Compound: Three compounds provide optimal levels of traction, support and durability. A base of high durometer rubber supports the entire tread and transitions into the knobs to prevent folding or squirming. Medium stiffness centre knobs cap the base layer to provide traction and durability without sacrificing rolling efficiency, while soft compound side knobs deliver maximum grip and slow rebound for increased cornering traction. TCS Light/Fast Rolling: A fast and efficient centreline tread compound matched to sticky, low durometer side knobs coat a supple, gram-conscious casing designed to be compliant while still trail-worthy. SG2: SG2 defends all surfaces of a tyre by providing an uninterrupted layer of puncture protection from bead to bead. Tubeless Compatible System (TCS): TCS is WTB's standardised tubeless rim/tyre system designed to meet international ETRTO standards and provide the most reliable tubeless system available. Pairing WTB’s legendary casings and tread compounds with a Tubeless Folding bead delivers the increased traction and reliability of a tubeless tyre at a lower weight than any tubed alternative. Manufacturer's Part Numbers: W010-0887 Black 29" 2.25" W010-0895 Black 27.5" 2.6" W010-0897 Black 29" 2.6"
This mountain bike (MTB) tyre comes equipped with WTB's TriTec compound, which uses its three compounds to deliver maximum grip and traction as you charge from trail to trail. Designed to improve upon the beloved Trail Boss 2.25, the wider Trail Boss 2.6 builds on perfection with a more aggressive tread pattern to match its increased width. Generous spacing between sizable knobs provides better traction in loose or wet conditions, while staying true to its fleet-footed heritage. Large, supportive side knobs dig deep, whether you’re leaning into a corner or grabbing a handful of brake. Most often used as a rear tyre, the Trail Boss 2.6 also provides plentiful traction as a front tyre on hardpack trails. No-Compromise Tread Some tyres are semi-slick and fast while others are chunky and bite. Trail Boss is designed to be the middle ground trail tyre. Tight groupings of centre knobs cut down on rolling resistance without hesitating to dig in while braking. Tall outer knobs quickly provide traction in the earliest phases of cornering. Strategically Directional Siping Centre and intermediate knobs are siped in a direction that improves accelerating and braking traction by increasing the number of working edges that bite into the trail when you crank on the pedals or slam on the brakes. Outer knobs feature sipes that run parallel to the tyre in order to provide the surface of the knobs with more cornering traction. Rear Focused Design Trail Boss 2.6 features toothy knobs that maximise braking traction while their relatively tight spacing improves the longevity of the rear tyre by increasing the total surface area counteracting heavy braking forces. Substantial side knobs overhang the sidewall of the tyre to protect it from slashes while you're steering with the rear. We suggest pairing the Trail Boss 2.6 with a Vigilante 2.6 on the front (available separately). Manufacturer's Part Number: W110-1116