The Vittoria Mazza combines years of athlete input with cutting edge tread technology raising the bar on the mixed terrain Enduro tyre category. Starting with a defined centre tread the Mazza uses deep siping in the direction of rotation allowing the tyre to roll fast while still opposing drift especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs making Mazza a top choice for both front and rear use. Substantial room was designed into the centre tread to provide braking traction while also accelerating cleanly. Cornering on the Mazza is handled by Vittorias trademark progressive sipe width technology which gives a gummy inside effective edge but without the instability that competitors experience on the outside of the tread. Simply put bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable confident and communicative feel at the limit of cornering. Mazza has generous tread depth claws into a range of terrain and is stabilized with Vittorias proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads leading to reduced rolling resistance and increased wear life. The bar has been raised Progressive sipe width for tactile grip on rocks and roots Stepped leading edge centre-tread maintains speed and delivers climbing traction Aggressive profile with ample sipe spacing for mixed terrain Features: Material: Nylon 120 TPI Compound: 4C Type: Trail Bead: TNT Colour: Anthracite ETRTO: 60-584 Weight: 890g
The muddiest DH course conditions possible have inspired the Mota DH tyre. Intended for use on professionally maintained courses, the moto block spikes cut into soft terrain, providing world class grip across the most slick surfaces. The Mota tread features the same progressive width design as the Martello, which provides for a progressive fine-touch tactile feel on the effective edge. When the course demands the most aggressive tyres possible, the Mota is your answer4 compounds in the tread (4C) for unparalleled traction on technical courses,GRAPHENE 2.0 compound delivers ultimate wet grip,Progressive sipe-width pattern provides tactile grip at the knob surface without compromising on speed or grip,Generous tread spacing allows for immediate shredding of mud and debris,Aggressive tyre for wet weather and muddy conditions.Key Features:Material: Nylon 120 TPI,Compound: 4C Graphene 2.0,Discipline: MTB Trail,Bead: TNT.
The muddiest DH course conditions possible have inspired the Mota DH tyre. Intended for use on professionally maintained courses, the moto block spikes cut into soft terrain, providing world class grip across the most slick surfaces. The Mota tread features the same progressive width design as the Martello, which provides for a progressive fine-touch tactile feel on the effective edge. When the course demands the most aggressive tyres possible, the Mota is your answer4 compounds in the tread (4C) for unparalleled traction on technical courses,GRAPHENE 2.0 compound delivers ultimate wet grip,Progressive sipe-width pattern provides tactile grip at the knob surface without compromising on speed or grip,Generous tread spacing allows for immediate shredding of mud and debris,Aggressive tyre for wet weather and muddy conditions.Key Features:Material: Nylon 120 TPI,Compound: 4C Graphene 2.0,Discipline: MTB Trail,Bead: TNT.
Vitus Derailleur Hanger 41-E-Escarpe-E-SommetThis gear hanger is specifically designed for use with Vitus E-Escarpe & E-Sommet bikes. Perfect as a direct replacement to get you back up and rolling again on your bike.Features: Genuine High-Quality Vitus replacement hanger Compatibility: Vitus E-Escarpe & E-SommetBuy Vitus Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for action, this tough part is perfect for protecting your frame while also providing an additional point of support for aligning your front mech.
This replacement front mech mounting hanger is perfect for replacing the old one that came on your Vitus Energie EVO cyclocross bike from 2021 to present. It can be used to switch to a 2x setup to allow the use of a front derailleur. Manufacturer's Part Number: FB-GUO-088 Black
Vitus Energie EVO Front Deraileur MountThis replacement front mech mounting hanger is ideal for replacing the old one that came on your Vitus Energie EVO cyclocross bike from 2021 to present. It can be used to switch to a 2x setup to allow the use of a front derailleur.Features: Use: Cyclocross (CX) Compatibility: Vitus Energie EVO (2021 to present) Genuine Vitus spare partManufacturer's Part Number: FB-GUO-088 BlackBuy Vitus Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This genuine Vitus replacement hanger is suitable for the following frames: Sentier 2015 to 2017 Escarpe 2015 to 2017 Sommet 2015 to 2017 Click here to view and download the Gear Hanger Cheat Sheet to ensure compatibility with all Vitus hangers.
A genuine Vitus gear hanger that's compatible with the following bike models: Sentier 2018-Onwards E-Sentier 2018-Onwards Escarpe 2018-2020 Sommet 2018-2020 Click here to view and download the Gear Hanger Cheat Sheet to ensure compatibility with all Vitus hangers.
This genuine Vitus replacement gear hanger has been specifically designed for use along with ZX1 2018-2020 frames. It's perfect for replacing your broken existing model, so you can get back up and running again fast. Click here to view and download the Gear Hanger Cheat Sheet to ensure compatibility with all Vitus hangers.
This genuine replacement gear hanger is specially engineered for Vitus Dominer (2016-onwards) frames. Ideal for replacing your broken existing model, so you can get back up and running again quickly. Click here to view and download the Gear Hanger Cheat Sheet to ensure compatibility with all Vitus hangers.
Designed for ease of use, this brilliant component is ideal for replacing your broken gear hanger. Perfect for keeping in your workshop for when the unexpected happens, this simple part allows you to spend less time on maintenance and more time enjoying the ride.