On some bikes it just isn't possible to mount a rear light on the seatpost, whether that be because it features an aero profile or is a dropper post. Fear not, because the Exposure Saddle Rail Bracket.Quickly mounts your Exposure Light to your saddle rails, improving compatibilityCompatible with Exposure Flare, TraceR lights and all saddles with conventional railsThe simple design takes a matter of seconds to mount to your saddle rails. Then, simply click your TraceR or Flare light into place and go for a ride. It really is that simple!
Designed to fit FSA's Power Drive cranks, this Power Drive bottom bracket uses a forged hollow cro-moly axle with sealed cartridge bearings in forged aluminium cups for smooth and stiff performance. With the addition of double snap seals for water and dirt protection this bottom bracket is built to last.Weight: 325g
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
The Microshift M21 rear derailleur is designed for use with 6/7-speed Shimano Rapid-fire shifters and is built to be tough, durable and to provide smooth shifting. The long cage is suit for use with double and triple chainsets and offers excellent shifting thanks to the stiff steel construction. With steel bushes in the composite pulleys, this is a derailleur that is built to stand the test of time! If you want a great value 6/7-speed Shimano compatible rear derailleur, look no further than the Microshift M21!
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
The Exposure Quick Release Stem Bracket is simple, sturdy, easy to use and is perfect for enabling you to run your favourite Exposure Light mounted to your stem to keep it centralised and pointed in the right direction.Incredibly simple and easy to use design takes mere seconds to mountEnables you to mount your Exposure light in an instant, getting you out on the trails quickerSuitable for a variety of stem types and bolt diameters from 17-35mmCompatible with Exposure SixPack, MaxxD, Toro, Race & Strada lightsThe simple design means it takes a matter of seconds to attach the mount to your bike. Once installed it is a breeze to securely fit your Exposure light to the bars using the simple mounting mechanism. Compatible with all Exposure main headlamps from 2007 onward, the Exposure Quick Release Stem Bracket is light, easy to use and, as with Exposure products, beautifully made.
Already have an Exposure Quick Release Bracket on your bars and want to fit your action camera too Well now you can use that Quick Release Bracket to do just that thanks to the Exposure Lights QR Bracket Action Camera Mount! Slotting neatly into your Exposure Quick Release Bracket, you can easily fit your action camera in place ready to record the action from your next ride.