Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Not content with the performance of their S-Track series of pedals, Look have designed the X-Track to exceed their performance in style. Built to be light, tough and compatible with Shimano SPD-style cleats, the Look X-Track Race Carbon is perfect for fast-paced riding.Platform is large enough for efficient power transfer and stability yet small enough to help avoid rock strikesAdjustable release tension allows you to fine tune resistance to your preferenceCompatible with included Look cleats as well as Shimano SPD cleatsGeometry of clip mechanism sheds mud with easeLightweight construction keeps weight to just 174g per pedalCleats includedDesigned to be tough enough to take a beating and light enough to race, the Look X-Track Race Carbon uses a Shimano SPD-compatible mechanism, allowing you to use the supplied Look cleats or Shimano cleats and SPD-compatible cleats from other brands. The mechanism is not only versatile then, but it also sheds mud easily and is tough enough to shrug off rock strikes from errant pedal strokes. Like Shimano SPD pedals, the release tension can be adjusted to suit your preference; it can be left fairly easy to suit beginners or can be cranked down hard for experienced riders who want maximum retention to avoid any accidental unclipping.The carbon body of the X-Track Race Carbon has enough of a contact patch with your shoe to transfer as much power as possible and provide enough stability over rough terrain, but it s low profile also help to keep them clear of rocks when pedalling through jagged rock gardens. It also helps to keep the weight down to just 174g per pedal. Durability is one of Look s trademarks and the X-Track Race Carbon is no different. Equipped with a double weather-resistant seal to help keep the elements away from the spindle and bearings, these pedals are built to last and stand the test of time. Light, easy to use, versatile and tough as old boots, the Look X-Track Race Carbon is the perfect pedal for fast-paced cross country, cyclocross or gravel riding in any conditions.
The Hamax Zenith Relax is an elegant and yet robust child bicycle seat of high quality. All adjustments are designed for one-handed operation and the seat can be mounted on the carrier rack. Removeable paddingHarness with shoulder paddingsReflective in the back for improved visibilityEnables the seat to be mounted on the existing carrierCarriers must be approved to carry 25 kg (ISO11243)Fits carriers from 120 180 mmTube diameters 10-20 mm. Tubes should be round. For all other shapes, make sure the adapter has a secure fit.Suitable for many e-bikesMinimum age: 9 Months* (reflects approximate age when child can hold head upright without support).Max Child Weight: 22kgReclining: Yes 12,5°Luggage carrier: Width 120-180mm / Diameter 10-20mm / Approved for 25kgThe 12,5° ergonomic resting position is operated by a simple, one-handed reclining dial that can be adjusted without having to dismount your bike. Variable sleep positions up to 12,5 degrees allows your child to ride in comfort and maintain an ideal head position while at rest. The helmet recess allows the child s head to sit comfortably without being pushed forward. There are reflectors for increased visibility, adhered to back of seat for added visibility at night and the wheel guard attachments offer protection for your little one s toes from the spokes.
The Topeak Tetrarack M2L Rear Rack is a perfect quick-mount rear rack system attaches to full suspension mountain bike seat stays or hardtail MTB without rack eyelets. Ideal for bike packing or touring adventures.Attachments: Seat stays with hook and loop strapsMaterial: Aluminium / Engineering grade polymer / Nylon strapsAdjustments: Strut slotsCompatibility: Topeak E-Xplorer TrunkBox, MTX TrunkBags, KLICKfix / RackTime Snapit or Vario system bagsMax Load: 12kg / 26lbSize: 47.5 x 38.5 x 13.5cm / 18.7 x 15.2 x 5.3 Weight: 1.1kg / 2.43ozAdded Feature: Clamp for rear reflector, Taillight MountThis large rear rack features an innovative top plate that adjusts to level independent of the seat stay angle. Integrated QuickTrack system allows Topeak TrunkBags / TrunkBox to slide and lock into place and release with the push of a button. Innovative hook and loop strap mounting system cinches down tightly to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.
Ceramic bearings for improved performance and longevity.
16mm hardened MAX-Performance steel shackle Patented pending hardened double deadbolt design gives additional protection against twist attacks Highest security disc-style cylinder is pick and drill resistant Protective vinyl coating Sliding dustcover protects cylinder from the elements Includes Transit FlexFrame-U transportation system which allows for versatile carrying 3 stainless steel keys – one lighted with high intensity LED bulb & replaceable battery Key Safe Program Rated 9/10 on Kryptonite's security scale Optional ATPO - £ 2500 Product dimensions: 4” x 8' (10.2cm x 20.3cm) Product weight: 4.45 lbs (2.02 kgs) Sold Secure Bicycle Gold certified
Rotor BB1 BSA Ceramic Road Bottom BracketRotor set out with the goal of creating a bottom bracket unlike anything currently available on the market with a flashy and aesthetically appealing look.The BB1 is incredibly light and is sure not to go unnoticed, and the smooth unobtrusive lines marry perfectly with any type compatible crankset, be it made of carbon or aluminium. The BB1 is available in black colour with steel bearings, Enduro Grade5 Ceramic and Enduro Grade3 Ceramic. The steel option offers a light and elegant bottom bracket at a very competitive price while the ceramic bearing options are ideal for those looking to shed every possible gram while at the same time acquiring an incredibly smooth bottom bracket. Both versions are available for road (BSA only) as well as MTB use. The ceramic versions come in at an incredible 91g for the road model, and 95g for the MTB, while the steels comes in at 97g for road and 101g for MTB; still quite impressive.Features: BB1 BSA FOR BSA FRAMESteel: 96g, Ceramic 91g.Black anodized and lasered design.Lathe and CNC T6 heat treated 7075 Aluminium.Labyrinth seals prevent bearing contamination.For all ROTOR and Shimano compatible 24mm cranks.Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Jacket IIMuddy trails. Stormy wet-weather. The ideal time for some mountain bike fun. And the waterproof Endura SingleTrack MTB Jacket II makes sure you'll be riding in comfort, despite the wild weather. It's thanks to the 3-layer ExoShell20™ waterproof fabric that the SingleTrack MTB Jacket II does such a great job of keeping you dry when conditions turn wet and muddy. Its 10,000mm waterproof rating means you stay drier for longer. Which means more fun time on the trails. But excellent breathability also maintains comfort even when working up a sweat on steep and technical climbs. Despite the weather, there may come a point when some fresh air is welcome. And here the underarm vents let you easily regulate airflow to the inside and thus control body temperature. However, if the weather turns particularly nasty, pull up the hood for extra protection. Lastly, reflective trims make you easy to spot at night, lit up when caught in the light of your night-riding buddies headlamps. ExoShell20™ ECO 3 fabricA soft, noise-free outer fabric is faced with a super-fine denier tricot inner layer to give outstanding comfort against the skin. Sandwiched between the outer and inner is a thin PU membrane, giving a 10,000mm waterproof rating to keep the rain out, while 20,000g/m2/24hr breathability ensures you remain sweat-free as you build body heat. Features:Materials: 80% Recycled Polyester, 20% PolyesterWaterproof and breathable ExoShell20TM ECO 3 layer fabricContains 80% recycled fabric with PFC-Free, non-toxic durable water repellent finishWater repellent front zip with storm flapGrown on hood with front adjustmentWater repellent zips on centre front and chest pocketPits vents for temperature regulationReflective trims on hood, cuff and rear tailWaterproof- 10000 mm / Breathable - 20000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Jacket IIMuddy trails. Stormy wet-weather. The ideal time for some mountain bike fun. And the waterproof Endura SingleTrack MTB Jacket II makes sure you'll be riding in comfort, despite the wild weather. It's thanks to the 3-layer ExoShell20™ waterproof fabric that the SingleTrack MTB Jacket II does such a great job of keeping you dry when conditions turn wet and muddy. Its 10,000mm waterproof rating means you stay drier for longer. Which means more fun time on the trails. But excellent breathability also maintains comfort even when working up a sweat on steep and technical climbs. Despite the weather, there may come a point when some fresh air is welcome. And here the underarm vents let you easily regulate airflow to the inside and thus control body temperature. However, if the weather turns particularly nasty, pull up the hood for extra protection. Lastly, reflective trims make you easy to spot at night, lit up when caught in the light of your night-riding buddies headlamps. ExoShell20™ ECO 3 fabricA soft, noise-free outer fabric is faced with a super-fine denier tricot inner layer to give outstanding comfort against the skin. Sandwiched between the outer and inner is a thin PU membrane, giving a 10,000mm waterproof rating to keep the rain out, while 20,000g/m2/24hr breathability ensures you remain sweat-free as you build body heat. Features:Materials: 80% Recycled Polyester, 20% PolyesterWaterproof and breathable ExoShell20TM ECO 3 layer fabricContains 80% recycled fabric with PFC-Free, non-toxic durable water repellent finishWater repellent front zip with storm flapGrown on hood with front adjustmentWater repellent zips on centre front and chest pocketPits vents for temperature regulationReflective trims on hood, cuff and rear tailWaterproof- 10000 mm / Breathable - 20000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Trousers IIThe Endura SingleTrack MTB Trousers II are equally at home when you're speeding down technical trails as well as pedalling back up again. They're true mountain bike all-rounders.When you're kicking up dirt and slaying trails it's inevitable you'll have a few tumbles, a few scrapes and scratches. But thanks to their tough Nylon construction, the SingleTrack MTB Trousers II are up easily to the task of your mountain biking escapades. And with a mix of double and triple stitched seams, they're built to last too. As you fly across all types of terrain the bike-specific cut and stretch panels keep you mobile and flexible, making pedalling easy and reacting to group and terrain a cinch. The tapered leg prevents the ankles from catching on cranks or chain and Endura have also ensured there's space for knee pads too. At the waist, Velcro® adjusters let you get a slip-free fit and ClickFast™ compatibility means easy use of your favourite Endura liner shorts. As for warmer days, the zipped leg vents let you boost airflow and regulate temperature, keeping sweat build-up at bay. These really are the only mountain bike trail pants you’ll ever need.Features:Materials: 100% PolyamideTough durable nylon fabrics with large stretch panelsCritical twin and triple-needle stitchingZipped hand and phone pocketsWicking waistband with Velcro® adjustersClickFast™ liner compatible (liner not supplied)Knee pad friendly cutZipped leg ventsBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Trousers IIThe Endura SingleTrack MTB Trousers II are equally at home when you're speeding down technical trails as well as pedalling back up again. They're true mountain bike all-rounders.When you're kicking up dirt and slaying trails it's inevitable you'll have a few tumbles, a few scrapes and scratches. But thanks to their tough Nylon construction, the SingleTrack MTB Trousers II are up easily to the task of your mountain biking escapades. And with a mix of double and triple stitched seams, they're built to last too. As you fly across all types of terrain the bike-specific cut and stretch panels keep you mobile and flexible, making pedalling easy and reacting to group and terrain a cinch. The tapered leg prevents the ankles from catching on cranks or chain and Endura have also ensured there's space for knee pads too. At the waist, Velcro® adjusters let you get a slip-free fit and ClickFast™ compatibility means easy use of your favourite Endura liner shorts. As for warmer days, the zipped leg vents let you boost airflow and regulate temperature, keeping sweat build-up at bay. These really are the only mountain bike trail pants you’ll ever need.Features:Materials: 100% PolyamideTough durable nylon fabrics with large stretch panelsCritical twin and triple-needle stitchingZipped hand and phone pocketsWicking waistband with Velcro® adjustersClickFast™ liner compatible (liner not supplied)Knee pad friendly cutZipped leg ventsBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Trousers IIThe Endura SingleTrack MTB Trousers II are equally at home when you're speeding down technical trails as well as pedalling back up again. They're true mountain bike all-rounders.When you're kicking up dirt and slaying trails it's inevitable you'll have a few tumbles, a few scrapes and scratches. But thanks to their tough Nylon construction, the SingleTrack MTB Trousers II are up easily to the task of your mountain biking escapades. And with a mix of double and triple stitched seams, they're built to last too. As you fly across all types of terrain the bike-specific cut and stretch panels keep you mobile and flexible, making pedalling easy and reacting to group and terrain a cinch. The tapered leg prevents the ankles from catching on cranks or chain and Endura have also ensured there's space for knee pads too. At the waist, Velcro® adjusters let you get a slip-free fit and ClickFast™ compatibility means easy use of your favourite Endura liner shorts. As for warmer days, the zipped leg vents let you boost airflow and regulate temperature, keeping sweat build-up at bay. These really are the only mountain bike trail pants you’ll ever need.Features:Materials: 100% PolyamideTough durable nylon fabrics with large stretch panelsCritical twin and triple-needle stitchingZipped hand and phone pocketsWicking waistband with Velcro® adjustersClickFast™ liner compatible (liner not supplied)Knee pad friendly cutZipped leg ventsBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.