This rack has a unique top plate that adjusts to your bikes fork angle for a superb fit and outstanding stability when riding. Plus, it features Topeak's integrated QuickTrack mounting system that allows Topeak TrunkBags to slide in, lock into place and release at the push of a button. And, it's optimised for use with Topeak's hook and loop strap mounting system that holds your cargo securely and keeps it safe during transit. Finally, this rack is also compatible with KLICKfix® / RackTime® Snapit or Vario system bags. Please note that this rack is not recommended for use with Carbon Forks.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
These custom, Swiss made bearings are double sealed, fully serviceable, and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers, again increasing life and reliability. Hope uses a noncontact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.
An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tyre pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long, tangle-free hose can even reach bikes mounted in a work stand. The SmartHead™ DX3 automatically adjusts to fit Presta or Schrader valves and a new lower profile air release button allows fine tuning of tyre pressure while preventing unintended pressure release.
The Blackburn Outpost Rear Pannier Rack provides a versatile rear rack that can carry some serious load, up to 25kg making it perfect for touring and bike packing. It features Blackburn s fit system and is compatible with 26 , 700c or 29 wheels, is disc brake compatible and will fit most brake and frame mounts. The weight savings does not mean that Blackburn have sacrificed ease of installation, fit or the stability that is gained from low rider mounting.Adjustable height55lb/25kg capacity675gBlackburn Fit System mounts perfectly with 26 , 700c or 29 wheels, disc compatible and will work with most brake or frame mountsNarrow profile keeps pannier weight close to centre for better balanceLow and high pannier mounts
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances. Fits BB92 / BB89.5 / BB86.5 & 100mm BB's for Fat Bikes.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike.This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit. As with the threaded version of the BB you can fit Sram/Truvativ cranks with the use of the adapters which opens this BB up to all markets and brand allegiances.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.
Do you love Hope components and need a new BB Then look no further than the Pressfit 46 from Hope. Designed to fit frames which have a Pressfit (Threadless) bottom bracket shell this BB brings Hope's legendary reliability to this new breed of bike. This BB gives a very secure fit as the bearing screw into the PF cups which gives a safe and secure fit.