Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Flexible and Durable Mudguard Made from polypropylene, the Proguard Standard Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer to improve the protection of the face and eyes when riding at high speed. The turndown at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the RapidRacerProducts Proguard Standard Mudguard as a means of offering greater protection for your seals from high-velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
The RearGuard - OFF-ROAD is designed for use off-road on either a mountain bike or CX bike, it's a fast-fitting mudguard for those last-minute decisions. It attaches underneath the saddle with 1 velcro strap and takes less than 20 seconds to fit. It will never come off during your ride and offers great protection for your REAR and back. The 3 new creases add stability and strength and the additional length adds protection over rough terrain.
Aliso Tubeless Compatible Folding Tyre
The TLR is the Tubeless Ready model of the Agilest range. The “Panaracer Ratio” is in full effect with this tyre. ZSG Agile Compound has been combined with the super supple Advanced Extra Alpha Cord to deliver a grippy low rolling resistance supple ride.The bead has been designed with consideration around current rim profiles including hookless beads for ease of installation specifically around mounting and inflating.Key Features:Size: 700x25c, 700x28c, 700x30c,ETRTO: 28-622,Tread Colour: Black,Sidewall Colour: Black,Weight:,700x25c - 220g,700x28c - 250g,700x30c - 270g.Recommended kPa: Max 650,Recommended PSI: Max 95.
The Panaracer Crosstown Sport is a straightforward tyre that is designed to be used every day on your commute or just simply get you to where you want to go. Its rugged good looks and deep tread design with grooves is intended to move water and improve grip. With a huge range of sizes for folding bikes, road / hybrid & MTB bikes it makes Crosstown one of the most versatile tyres in our range.Features:Road, Hybrid, Mountain and Compact Folding Bike compatible,Sizes: 700 x 28c / 700 x 32c / 700 x 35c / 700 x 38c / 26 x 1.50 / 26 x 1.75 / 16 x 1-1/8 & 20 x 1.5,Weights: 500g / 600g / 700g / 800g / 900g / 999g / 900g / 999g / 390g / 550g,Colours: Black/Black,Designed in Japan / Made in Thailand.
Building on the success of the GravelKing Slick and the GravelKing SK, both industry leading tyres in the gravel category. Panaracer has developed the next generation of the gravel tires in the GravelKing Semi Slick. Designed as a dryer condition or race day ready and fast rolling tyre, the Semi Slick is made for those riders who want to go fast while maintaining great control, traction and climbing prowess.The Semi Slick features an all new tread pattern consisting of a smooth diamond pattern centre with more aggressive side lugs. This tread pattern allows the rider to keep speed going into corners and maintain control throughout any transition a gravel ride could present. The GravelKing SS incorporates a supple 120 TPI casing with a nylon puncture resistant belt and Panaracer’s proprietary ZSG (Zero Slip Grip) compound. Note: 28c is not Tubeless compatible and must be run using tubes.FEATURESTubeless Compatible (Up to 60psi),ZSG Advance Compound,AX-Alpha Advanced Alpha Extra Cord,Anti-Flat Casing,Bead: Folding,Sizes: 700 x 28c,Weight: 310g,Colours: Black/Black, Black/Brown,Made in Japan.TECHNOLOGIES:ZSG Natural CompoundOur own very low rolling resistance as the premium compound. Its enhanced wear resistance makes it perfect for a long lasting training tire with an excellent ride.AX-Alpha - Advanced Alpha Extra CordAX technology uses extremely narrow cord which is weaved at a super high density into the casing for lightness and flexibility. This increased density improves resistance to cuts and abrasions.Anti-Flat CasingAnti-puncture reinforcement throughout the tire strengthens resistance to cuts and pinch flats.
The Panaracer Crosstown is simply designed to be used every day on your commute or just easily get you to where you want to go. Its rugged good looks and deep tread design with grooves is designed to move water and increase grip with the road or trail.With a huge range of sizes for folding bikes, road / hybrid & MTB bikes it makes Crosstown one of the most versatile tyres in our range.The CrossTown tyre comes with the addition of a puncture protection strip to give you more confidence on your journey.Features:Puncture protection strip,Steel bead,Road, Hybrid, Mountain and Compact Folding Bike compatible,Sizes: 700 x 28c / 700 x 32c / 700 x 35c / 700 x 38c / 26 x 1.50 / 26 x 1.75 / 16 x 1-1/8 & 20 x 1.5,Weights: 500g / 600g / 700g / 800g / 900g / 999g / 900g / 999g / 390g / 550g,Colours: Black/Black,Designed in Japan / Made in Thailand.
Pasela is our perfect all around touring or urban commuting tyre. Designed for an incredibly supple and comfortable ride, its comprehensive size range ensures that you can find a Pasela for most any terrain. Ride it and trust in it! A cornerstone of the range the Pasela is ideal for commuting long distance cycling and a wider variety of terrains.Features:400D Lite Extra Cord,Tough durable rubber,All condition tread pattern,Ideal for Training, Touring, Commuting on road or light gravel paths,Available in Amber or Black sidewall,Wide range of sizes – 20in bike, Road and Mountain bike compatible sizes,Also available in a folding version.400D Lite Extra Cord400D Cord technology increases side cut resistance of our tyres while improving the rigidity during cornering. The casing reinforcement helps protect the tube from punctures without adding weight to the tyre.£11.45
The Panaracer Crosstown Sport is a straightforward tyre that is designed to be used every day on your commute or just simply get you to where you want to go. Its rugged good looks and deep tread design with grooves is intended to move water and improve grip. With a huge range of sizes for folding bikes, road / hybrid & MTB bikes it makes Crosstown one of the most versatile tyres in our range.Features:Road, Hybrid, Mountain and Compact Folding Bike compatible,Sizes: 700 x 28c / 700 x 32c / 700 x 35c / 700 x 38c / 26 x 1.50 / 26 x 1.75 / 16 x 1-1/8 & 20 x 1.5,Weights: 500g / 600g / 700g / 800g / 900g / 999g / 900g / 999g / 390g / 550g,Colours: Black/Black,Designed in Japan / Made in Thailand.
The Panaracer Crosstown is simply designed to be used every day on your commute or just easily get you to where you want to go. Its rugged good looks and deep tread design with grooves is designed to move water and increase grip with the road or trail.With a huge range of sizes for folding bikes, road / hybrid & MTB bikes it makes Crosstown one of the most versatile tyres in our range.The CrossTown tyre comes with the addition of a puncture protection strip to give you more confidence on your journey.Features:Puncture protection strip,Steel bead,Road, Hybrid, Mountain and Compact Folding Bike compatible,Sizes: 700 x 28c / 700 x 32c / 700 x 35c / 700 x 38c / 26 x 1.50 / 26 x 1.75 / 16 x 1-1/8 & 20 x 1.5,Weights: 500g / 600g / 700g / 800g / 900g / 999g / 900g / 999g / 390g / 550g,Colours: Black/Black,Designed in Japan / Made in Thailand.