Introducing the Atlas pedal. A low-profile, lightweight, wide aluminium body with double-concave platform. The svelte design makes it perfect for trail bikes while chromoly axle and bottom loading hex traction pins ensure it can take abuse and perform double duty on your DH rig. All of the Race Face styling and performance expected from the Atlas line.Key Features:Super thin double concave wide platform.,Fully sealed bearing design.,Hex-head threaded pin design offers more bite for added security.,Fore and aft angled bottom-loading pins.,Hidden pin / Grease access port..Specification:Built for: Trail / AM / FR / DH.,Body Material: 6061-T6 Aluminium.,Axle Material:Chromoly steel.,Height 12-14.5mm.,Platform Size: 101x114cm.,Weight: 355g.,# of Pins: 20 SHCS hex traction pins per pedal (10 per side).,Bearings: 4 Full sealed cartridge bearings per pedal..
Race Face Single Rings - Now with performance enhancing chain retention technology. Burly enough for DH Racers and Dirt Jumpers, yet light enough for XC/singlespeed. Single Rings are machined from 7075 aluminium and tested in some of the most punishing riding terrain Built to last.Key Features:Narrow Wide tooth profiling ensures ultimate chain retention,Stiff 4mm plate thickness and I-beam construction transfer loads without flexing,7075-T6 aluminium, aerospace grade strength,Reversible laser etched graphics,Compatible for 9, 10 and 11 speed,Sizes: 30, 32, 34, 36, 38, 104 BCD (4 bolt) ,Weights: 37-57g (36T - 50g).
Trail riding can be tough on your gear. The ends of your cranks take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!Protective rubber boots to fit over the end of your alloy crank arms.Fits:Shimano XTR,Shimano XT,Shimano SLX,Sram X7,Sram X5,Atlas,Turbine (new/old),Evolve (new/old),Deus,Ride,Most alloy road cranks.
RaceFace chainring bolt and nut set,Aluminium,Pack of 4,Allen head,Single/double ring,.
Race Face Indy Elbow D30™ GuardSpecifically designed with the growing Enduro scene in mind, the Indy Elbow combines the unrestricted mobility of the Race Face Charge Elbow with the added impact protection of D30™. Second-skin Butterfly Mesh sleeve with targeted D30™ high performance shock absorbing protective foam elbow. Protection you can trust on rowdy descents built into a minimal sleeve for unlimited range of motion while climbing. Butterfly mesh sleeve with second skin fit and targeted D30™ high performance shock absorbing foam elbow coverage. ,Silicone gripper along inner top opening ensures 'stay-put' fit. ,Woven elastic top strap with velcro closure offers personalized adjustment. ,Flatlock comfort seam finish..
Your favourite bars just got bigger, longer and lighter, Go figure? The magic of 35, believe the hype. Increasing the bar diameter to 35 allows us to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness and performance Race Face bars are known for. NEW Superlow 10mm rise, slam that cockpit. Get flatbar cockpit height with the comfort and good looks of a riser bar. 760mm full width for increased control without sacrificing weight. Key Features: Manufactured from UD Carbon with matte clearcoat.,Carbon optimized flex for improved small bump compliance.,. Specification: Built for: XC / Trail.,Dimensions: 760mm width, 8° rearward, 5° upward.,Rise: 20mm.,Weight: 180g.,Bar Diameter: 35mm..
Race Face Flank Leg D30™ GuardD30™ high performance shock absorbing foam,Additional foam extension saves shins from pedal bite,Proven Race Face open-back construction; no shoe removal necessary,Perforated neoprene enhances venting and moisture control,Terry lined for wicking and comfort,Foam padded side walls offer additional coverage,Branded rubber grab tabs.
Race Face Atlas Pedal Bearing Rebuild KitIncludes bearings, seals, axle end cap/bolt, and bearing press,Compatible with Race Face Atlas pedals.
Key Features:Durable lightweight Nylon.Easy on, easy off velcro closure.Regular - Length 240mm/Width 80-90mm.Oversize - Length 240mm/Width 100-130mm.
Introducing the AEffect pedal. Thin platform, concave aluminum body with bottom-loading pins. Shorter spindle design shaves weight making it perfect for trail bikes while the chromoly axle and bottom loading hex traction pins ensure it can take abuse and perform double duty on your DH rig. Hidden grease access port allows for on bike maintenance.Key Features:Thin concave platform,Reduced spindle length saves weight,Hex-head threaded pin design offers more bite for added security,Hidden / Grease access port for extended life.Specification:Built For: Trail/AM/FR/DH,Body Material: 6061-T6 Aluminium,Axle Material: Chromoly steel,Height: 15-16.9mm,Platform Size: 101x100cm,Weight: 375g,Bearings: Cartridge bearings and DU bushings,# of Pins: 20 SHCS hex traction pins per pedal.
The legacy of our Atlas crank continues with the release of the Atlas Cinch crankset. Crankarms forged and then machined from tough 7050 Alloy – with new web bracing that improves stiffness while cutting out unnecessary material. The new Atlas is lighter than previous versions without sacrificing strength and adds our user friendly Cinch interface system for new levels of versatility – making these cranks ideal across many disciplines including trail, enduro and full on DH or freeride! Imagine interchangeable spiders, limitless ring combinations, a 30mm alloy spindle, and full compatibility across all relevant frame standards; all delivered with RF proven strength. Quite possibly the most versatile crankset you will ever own!Key Features:Forged 7050 aluminium alloy arms.,Improved stiffness due to and forged web bracing on arms (Arms are 12% stiffer than Turbine).,30mm spindle - Uses high strength OPTIM-AL (7055) aluminium spindle.,Weight savings over previous gen. Atlas - 175mm with 36T single ring, 68/73mm Threaded BB - 792g vs. 825g = 33g.,68/73mm and 83mm 30mm spindle options for MTB.,Designed for good crank clearance on 27.5 DH, 27+ and 29+ bikes.,Cinch system for lighter 1x setups and future proof compatibility.,Boost compatible with new Cinch boost spider.,Compatible with our BMX spindle and spider..Specification:Built For: Trail/Enduro/DH/DJ/BMX,Size: 165, 170, 175mm,BB Options: 68/73 BSA, 83mm BSA, BB92/89.5, BB107/104.5, PF30-68/73, PF30-83,Spindle Diameter: 30mm,Spindle Options: Regular/Boost (RF136DH), Downhill (RF151DH), BMX (RF131),Weight: 795g - 175mm Arms with 24/36T combo and 68/73 spindle w/o BB,Chainline – 47mm.
Race Face Cinch spider. Converts 2014 Next SL cranks to all current chainring standards.Does not include mounting hardware.