Features:High performance super grippy PU bar tape with smart silicone backing which leaves no residue on the handlebars making fitting and replacement easier,Special PU construction keeps the tape lightweight, comfortable, hard wearing and grippy in all weather conditions,Includes finishing tape and bar plugs.
Key Features:Dual compound material gives the best balance between performance and service life.Pressure optimised core for enhanced pressure relief.Sleek anodized lock ring.Weight: 76g.
Dual Angular Contact,this describes the use of both angular contact bearings and angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. Here are a few key points of the AC-2 BMX Front Hub: The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell without any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in perfect alignment with each other! This ensures superior bearing performance and less chance of premature wear. Hub shell literally floats on the axle. The only force on the bearings is supplied by the wave spring (which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! ###section### Product Specs AXLE SIZE: Females Bolts SPOKE HOLES: 36h BEARINGS: Steel 20mm angular contact WEIGHT: 245g / 8.64oz
This bolt on style spider is for use with Profile Racing 3-Piece Race Chromoly Crankset with a standard sprocket bolt and 19mm (.75″) BB axles. Chainring can be mounted on inner or outer face of spider for chainline adjustability. Works best with the Profile Internal Bearing Euro BB, American BB, MID BB, or Spanish BB.
Titanium Spindle upgrade or replacement for Profile Race cranks and No Boss Cranks. Made in the USA at profile's factory in Florida. This spindle is machined from aircraft grade titanium and is a must if you are looking to lighten you ride. Fits profile race cranks and other 48spline 19mm cranks. Comes with Crmo Flush bolts and washers. Gun Drilled Hollow. ###section### Product Specs Rise: 19mm Bar Clamping Diameter: Titanium Bar Clamping Diameter: 158g / 5.53oz
Profile have been the premiere brand for 3-piece cranks for the last 15 years or more. These cranks are hand made in the USA. The arms are made from heat treated and swagged 4130 chromoly and the spindle is a heat treated gun drilled hollow 4130, 48spine spindle (titanium Upgrade available at Checkout) Titanium Spindle upgrade available at Checkout! Once at checout you will be prompted to choose a Titanium Spindle if required. ###section### Product Specs Crank Type:3pc Spindle Diameter:19mm Includes BB:No Weight:807g / 28.5oz ###shogun-image-section###
Profile have been the premiere brand for 3-piece cranks for the last 15 years or more. These cranks are hand made in the USA. The arms are made from heat treated and swagged 4130 chromoly and the spindle is a heat treated gun drilled hollow 4130, 48spine spindle (titanium Upgrade available at Checkout). Titanium Spindle upgrade available at Checkout! Once at checout you will be prompted to choose a Titanium Spindle if required. ###section### Product Specs Crank Type:3pc Spindle Diameter:19mm Includes BB:No Weight:807g / 28.5oz ###shogun-image-section###
Overview “AC-2” = Dual Angular Contact. This describes the use of both angular contact bearings&and&angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. The AC-2 Cassette Hub also offers changeable pawl/spring configurations for varying points of driver engagement to suit a rider’s personal preference. Here are a few key points of the AC-2 BMX Cassette Hub: -The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell&without&any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in&perfect&alignment with each other! This ensures superior bearing performance and less chance of premature wear. -Hub shell and driver literally “float” on the axle. The only force on the bearings is supplied by the wave spring(which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! -The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! -The AC-2 hub cassette driver is also unique. It allows for changeable P.O.E.(points of engagement). The hub driver comes standard with 6 pawls and springs. This option offers 96 P.O.E. -Maximum engagement. The other choice is to use just 3 pawls and springs. P.O.E. is reduced to 48 and minimal drag is achieved. This is a rider preference choice and both have a unique sound! -The proprietary Profile Racing 10 spline aluminum cassette body allows you to use Profile's standard steel, Elite, or aluminum cogs ranging from 12t to 18t. ###section### Product Specs HUB TYPE:&Cassette AXLE:&Female Bolts DRIVER:&Choose In Basket SPOKE HOLES:&36h WEIGHT:&370g / 13.05oz
OVERVIEW “AC-2” = Dual Angular Contact. This describes the use of both angular contact bearings&and&angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. The AC-2 Cassette Hub also offers changeable pawl/spring configurations for varying points of driver engagement to suit a rider’s personal preference. HERE ARE A FEW KEY POINTS OF THE AC-2 BMX DISC BRAKE CASSETTE HUB: -The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell&without&any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in&perfect&alignment with each other! This ensures superior bearing performance and less chance of premature wear. -Hub shell and driver literally “float” on the axle. The only force on the bearings is supplied by the wave spring(which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! -The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! -The AC-2 hub cassette driver is also unique. It allows for changeable P.O.E.(points of engagement). The hub driver comes standard with 6 pawls and springs. This option offers 96 P.O.E. -Maximum engagement. The other choice is to use just 3 pawls and springs. P.O.E. is reduced to 48 and minimal drag is achieved. This is a rider preference choice and both have a unique sound! -The proprietary Profile Racing 10 spline aluminum cassette body allows you to use Profile's standard steel, Elite, or aluminum cogs ranging from 12t to 18t. -ISO Standard 6 bolt disc brake mount.
Profile Design Subsonic Race AerobarThis high-quality clip-on bar is ideal for riders who want to achieve a lower rider position than what's currently possible on your current aerobars. Unlike other low stack bars, this brilliant version allows you to customise its stack height, so you aren't limited to just one armpad height. This makes it specifically tailored towards riders who intend to ride low and narrow while punching the smallest possible hole through the wind. Adjustable Aerobar Ready for racing, this tough component allows you to choose from up to 80 distinct riding positions just by moving its armrests. When combined with the risers it offers 1200 possible configurations for excellent versatility as you blast towards the podium.Features: Use: Road Angle: 35 degrees Rise: 80mm Type: Clip-on Extension Length: 350mm Width: 142-272mm Adjustment: Shaft bolt adjustmentWeight: 638g (approx)Buy Profile Design Components from Chain Reaction Cycles, the World's Largest Online Bike Store.